Table of Contents
Configuring ports and VLANs on Switch 2 (CLI example)
To configure ports and VLANs on Switch 2, do the following:
1.
On Switch 2, enable VLAN tagging on the necessary ports. Port 4 (connection to server 2) remains
untagged, so it is not configured below.
Main# /cfg/port 2
>> Port 2# tag e
Current VLAN tag support: disabled
New VLAN tag support:
Port 2 changed to tagged.
Main# /cfg/port 18
>> Port 18# tag e
Current VLAN tag support: disabled
New VLAN tag support:
Port 18 changed to tagged.
>> Port 18# apply
2.
Configure the VLANs and their member ports. Since all ports are by default configured for VLAN 1,
configure only those ports that belong to other VLANs.
>> /cfg/l2/vlan 3
>> VLAN 3# add 2
Current ports for VLAN 3: empty
Pending new ports for VLAN 3: 2
>> VLAN 3# add 4
Port 4 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 2 [y/n]: y
Current ports for VLAN 3: 2
Pending new ports for VLAN 3:
>> VLAN 3# add 18
Current ports for VLAN 3: 2
Pending new ports for VLAN 3: 18
>> /cfg/l2/vlan 4
>> VLAN 4# add 20
Port 20 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 2 [y/n]: y
Current ports for VLAN 4: empty
Pending new ports for VLAN 4: 20
>> apply
>> save
The external Layer 2 switches should also be configured for VLANs and tagging.
(Select port 2: connection to server 1)
enabled
enabled
(Apply the port configurations)
(Apply the port configurations)
(Save the port configurations)
VLANs
(Select uplink port 18)
(Enable tagging)
63
Table of Contents
