Normal Copying; Copying From The Automatic Document Feeder - Sharp LASER PRINTER Operation Manual
Laser printer
Hide thumbs
Also See for LASER PRINTER:
- Key operator's manual (20 pages) ,
- Operation manual (61 pages)
Table of Contents
NORMAL COPYING
This section describes the normal copying procedure.
Copying from the automatic document feeder
I I I I I 1-sided copies of 1-sided originals
Original
1
Place the originals in the document feeder tray.
(page 7)
2
Ensure that the 1-sided to 1-sided copy mode is
selected.
ORIGINAL
8
11
1
x
/
2
8
11
1
x
/
2
8
11
1.
1
x
/
2
8
11
2.
1
x
/
2
3.
11 17
x
8
R
4.
1
11
x
/
2
3
Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
4
Touch the [1-sided to 1-sided copy] key.
Copy
The one-sided to one-
sided mode is selected
when no icon for a two-
sided mode appears in the
dashed area on the display.
If the 1-sided to 1-sided
copy mode is already
selected steps 3 to 5 are not
needed.
The [1-sided to 1-sided] key
will be highlighted.
5
Touch the [OK] key.
0
OK
6
Ensure that paper of the same size as the
originals is automatically selected. (✼Note)
AUTO
8
11
1
X
/
2
PAPER SELECT
%
100
COPY RATIO
(✼Note) The following requirements must be satisfied.
G
Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2"
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R or A5)
are set and the auto paper select function is enabled.
1.
PLAIN
8
11
1
X
/
2
2.
8
TRANSPA
11
1
X
/
2
3.
11 17
PLAIN
x
The selected tray will be
highlighted or the message
"LOAD xxxxxx PAPER." will
appear. If the message ap-
pears, load paper in a pa-
per tray or the bypass tray
with paper of the required
size. Even if the message
above is displayed, copy-
ing can be performed onto
the currently selected pa-
per.
If originals of a size other
than the sizes above are to
be copied, manually select
the desired paper size.
9
- Quick Links:
- Troubleshooting and Maintenance
Hide quick links:
Chapters
Table of Contents
Troubleshooting
