Table of Contents
Chapter 2 Preparations
9.
Connect the USB cable to the USB connector on motherboard.
Note
10. If internal MO or internal RDX is installed, run BIOS SETUP and set the boot priority of removable
device to lower than the boot device.
[Boot] → [Boot Option #2] → [(Bus 08 Dev XX) PCI RAID Adapter]
11. Install the device driver for the backup file device.
Refer to the manual that comes with the backup file device.
1.12.2 Removal
Remove the backup file device in reverse order of the installation steps.
USB connector
Make sure that the USB cable does not touch any electrical component on
motherboard.
Express5800/R120d-2E User's Guide
1. Installing Internal Optional Devices
75
Table of Contents
