Power Menu (Bios Version: Gx.07.Xx); Summary Configuration Screen (Bios Version: Gx.07.Xx) - HP 525 5/XX Technical Reference Manual

Vectra 500 series pc
Table of Contents
4 Summary of the HP/Phoenix BIOS
HP/Phoenix BIOS (BIOS version: GX.07.xx)
be
, so as to prevent the exporting of data. Writes to the hard disk
locked
drive boot sector can also be
, for instance as a protection against
locked
viruses.
Under the "Start-Up Center" sub-menu, the Setup program not only allows
the user to select which devices are to be used (
or
) for booting up
yes
no
the system, but also indicates their order of precedence when more than one
is enabled: flexible disk drive, CD-ROM drive, or hard disk drive.

Power Menu (BIOS version: GX.07.xx)

The "Power" menu allows the user to set the standby delay. It also allows the
system administrator to decide whether the mouse is enabled as a means of
reactivating the system from Standby. It is also possible to specify whether
the space-bar is enabled as a means of reactivating the system from Off.

Summary Configuration Screen (BIOS version: GX.07.xx)

You can press
while the initial "Vectra" logo screen is being displayed to
run the Setup program (as described in the previous sub-sections).
Alternatively, you can press
to view the summary configuration screen,
an example of which is depicted on the next page. By default, this remains
on the screen for 20 seconds, but by pressing
once, it can be held on the
screen until
is pressed again, or until
is pressed. Pressing
will
cause the PC to be turned off.
88
Table of Contents
loading

This manual is also suitable for:

520 5/xxVectra 520Vectra 525

Table of Contents