Adding Phones With Auto-Registration And Taps - Cisco 7906G Administration Manual
Unified ip phone cisco unified callmanager 5.1 (sip)
Hide thumbs
Also See for 7906G:
- Administration manual (278 pages) ,
- User manual (112 pages) ,
- User giude (90 pages)
Table of Contents
Adding Phones to the Cisco Unified CallManager Database
Note
Adding Phones with Auto-Registration and TAPS
Note
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
2-14
Chapter 2
In some cases, you might not want to use auto-registration: for example, if you
want to assign a specific directory number to the phone or if you plan to
implement authentication or encryption, as described in
Cisco Unified CallManager Security Guide. For information about enabling
auto-registration, refer to "Enabling Auto-Registration" in the
Cisco Unified CallManager Administration Guide.
Cisco Unified CallManager automatically disables auto-registration if you
configure the cluster-wide security mode for authentication and encryption
through the Cisco CTL client.
Related Topics
Adding Phones with Auto-Registration and TAPS, page 2-14
•
Adding Phones with Cisco Unified CallManager Administration, page 2-15
•
Adding Phones with BAT, page 2-16
•
TAPS, the Tool for Auto-Registered Phones Support, works with the Bulk
Administration Tool (BAT) to update a batch of phones that were already added
to the Cisco Unified CallManager database with dummy MAC addresses. You use
TAPS to update MAC addresses and download pre-defined configurations for
phones.
You can add phones with auto-registration and TAPS without first gathering
MAC addresses from phones.
You should use auto-registration and TAPS to add less than 100 phones to your
network. To add more than 100 phones to your network, use the Bulk
Administration Tool (BAT). See the
page
2-16.
To implement TAPS, you or the end-user dial a TAPS directory number and follow
voice prompts. When the process is complete, the phone will have downloaded its
directory number and other settings, and the phone will be updated in
Cisco Unified CallManager Administration with the correct MAC address.
Preparing to Install the Cisco Unified IP Phone on Your Network
"Adding Phones with BAT" section on
OL-11515-01
Chapters
Table of Contents
Troubleshooting
