Table of Contents
30 | Performance Series HREP2 DVR User Guide
Remote Control at a Glance
Turn the power on or off.
Display the search window.
Display the backup window.
Function as channel selection
button in live or playback mode. Or
used for entering the password.
Switch the split screen display.
Switch to sequence mode.
Take a snapshot of the video.
Used to change the direction or adjust
the play speed in playback mode.
Exit from the current screen and
return to the previous screen.
Select a menu item or apply your
Change the Remote Control ID
The remote control will be active only if the remote control ID matches with the ID specified on
the DVR.
If multiple DVRs are installed on one place and you have just a single remote control, use the ID
button to set the remote control ID. Only the ID-matching DVR can be controlled.
www.honeywell.com/security
POWER
SEARCH
ARCHIVE
Channel #
DISPLAY
SEQ
SNAPSHOT
EXIT
ENTER
settings.
LOGOUT
Log out.
PANIC
Start the emergency recording.
ALARM
Show the alarm status with a popup
window.
SETUP
Display the system setup menu.
ID
Set the remote control ID.
LOG
Display the log list.
AUDIO
Display the audio channel selection
window.
KEYLOCK
Lock any operation on the unit.
RESERVE
Reserve the current video.
MENU
Display the tool bar on the live screen.
,
,
,
Use to move through the menus.
ZOOM/PTZ
Enter the digital zoom or PTZ mode
and control the operation.
Table of Contents
