Yamaha neoHD WiFi YMC-700 Owner's Manual page 51

Troubleshooting

•

Bluetooth

Searching...

Pairing Completed

Pairing Canceled

Bluetooth Connected

Bluetooth

Disconnected

No Bluetooth

Receiver

Bluetooth Receiver

Error

The Bluetooth wireless audio receiver and the Bluetooth component are in the process of the pairing.

The Bluetooth wireless audio receiver and the Bluetooth component are in the process of establishing the

connection.

The pairing is completed.

The pairing has been canceled.

The connection between the Yamaha Bluetooth wireless audio receiver (such as the YBA-IO. sold separately)

and the Bluetooth component is established.

The Bluetooth component is disconnected from the Yamaha Bluetooth wireless audio receiver (such as the

YBA-IO, sold separately).

The B1uetooth wireless audio receiver (such as the YBA-IO, sold separately) is not connected to this unit.

The Bluetooth wireless audio receiver has returned an error. Contact the nearest authorized Yamaha dealer or

service center.

•

Auto Speaker Setup

If an error or warning message appears, check the cause of the problem, then perform the Auto Speaker Setup procedure

again.

E·1: NO FRONT SP

E·2: NO SUR. SP

Front UR channel signals are not detected.

Check the front LIR speaker connections.

No surround channel signals are detected.

Check the surround UR speaker

connections.

6

6

E-3: NOISY

E-4: NO MIC

E-5: NO SIGNAL

E-6: USER CANCEL

E·7: INTERNAL ERROR

Background noise is too loud.

The YPAO Mic was unplugged during the

"Auto Speaker Setup" procedure.

The YPAO Mic does not detect test tones.

The "Auto Speaker Setup" procedure was

cancelled due to user activity.

An internal error occurred.

PerfonTI the Auto Speaker Setup in a quiet

environment.

Tum off noisy electric equipment like air

conditioners or move them away from the

YPAOMic.

Connect the supplied YPAO Mic to the

YPAO Mic jack.

Check the YPAO Mic setting.

Check the speaker connections and

placement.

The YPAO Mic or YPAO Mic jack may be

defective. Contact the nearest Yamaha

dealer or service center.

PerfonTI the Auto Speaker Setup procedure

again.

PerfonTI the Auto Speaker Setup procedure

again.

If this error occurs repeatedly. contact a

qualified Yamaha service center.

II

II

6,9

10

10

SWFR LEVEL ERROR

SO

En

The difference of volume level between

speakers and subwoofer is excessive.

Adjust the volume of the subwoofer to

compensate the status of "SWFR" on the

results display.

10