Appendix F: Optional Input Modules - Christie DS+6K User Manual
Hide thumbs
Also See for DS+6K:
- User manual (178 pages) ,
- Instruction sheet (6 pages) ,
- Brochure & specs (4 pages)
Table of Contents
RGB500 Input Module
38-804606-xx
RGB400BA Input Module
38-804610-xx
020-100001-01 Rev. 01 (04/07)
Optional Input Modules
There are many optional input modules and accessories currently available for this
projector. Contact your dealer for a complete and up-to-date listing.
The RGB500 Input Module may be installed in this projector, a Marquee Signal
Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input
signals from computers or other RGB source devices.
RGB500 Features
•
Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync), up to 500 MHz bandwidth
•
Accepts YPbPr, composite (on green) and Y/C (on red/blue)
•
BNC connectors for RGB signal inputs
NOTE: The audio connectors are not functional.
The RGB400 Buffered Amplifier Input Module may be installed in this projector, in a
Marquee Signal Switcher or in a Marquee Case/Power Supply. Connect three-, four-, or
five-wire RGB video signals of up to 400 MHz bandwidth, signals typically produced by
high-resolution computer or workstations. The buffering capability of the module enables
the incoming signal to be sent to a remote destination. Inputs are 75
RGB400BA Features
•
Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
•
Accepts YPbPr, composite (on green) and Y/C (on red/blue)
•
BNC connectors for RGB signal inputs
•
Buffered signals to a remote destination
NOTE: The audio connectors are not functional.
Appendix F
Ω
terminated.
F-1
Hide quick links:
Table of Contents
