Energy Saver Feature; Energy Star® Qualification - HP Passport 1912nm User Manual

The monitors support a reduced power state. The reduced power state will be entered into if the

monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon

detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and

the power light is turned amber. When the monitor is in the reduced power state, the monitor will

utilize less than one watt of power. There is a brief warm up period before the monitor will return to its

normal operating mode.

Refer to the computer manual for instructions on setting energy saver features (sometimes called

power management features).

NOTE:

The above power saver feature only works when connected to computers that have energy

saver features.

By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to

enter into the reduced power state at a predetermined time. When the monitor's Energy Saver utility

causes the monitor to enter the reduced power state, the power light blinks amber.

ENERGY STAR® Qualification

HP computers marked with the ENERGY STAR® Logo are compliant with the applicable U.S.

Environmental Protection Agency (EPA) ENERGY STAR specifications for computers. The EPA

ENERGY STAR Logo does not imply endorsement by the EPA. As an ENERGY STAR Partner,

Hewlett-Packard Company has determined the products marked with the ENERGY STAR Logo are

ENERGY STAR qualified as per the applicable ENERGY STAR guidelines for energy efficiency. The

following logo will appear on all ENERGY STAR qualified computers:

The ENERGY STAR Computers Program was created by the EPA to promote energy efficiency and

reduce air pollution through more energy-efficient equipment in homes, offices, and factories.

The Power Management feature allows the computer to enter into a low-power or "sleep" mode after

a period of user inactivity. To take advantage of this energy savings:

●

The Power Management feature has been preset to power down the computer when the user

presses the power button.

●

The Power Management feature has been preset to enter into "sleep" mode after 10 minutes of

user inactivity.

This product can be woken from "sleep" mode through user interaction with the computer's input

devices (mouse, keyboard).

ENWW

Energy Saver Feature

29