Honeywell NXL User Manual page 75

¡

¡

¢

¢

£

£

¤

¤

¥

¥

£

£

¦

¦

¦

¦

¡

¡

¢

¢

£

£

¤

¤

¥

¥

£

£

¦

¦

¦

¦

Software info submenu (S6.8.3)

The following information can be found under the Software info submenu (S6.8.3):

Page

I6.8.3.1

I6.8.3.2

I6.8.3.3

I6.8.3.4

Table 7-8. Software information pages

Application information submenu (S6.8.4)

You can find the following information from the Application info submenu (S6.8.4)

Page

A6.8.4.1

D6.8.4.1.1

D6.8.4.1.2

D6.8.4.1.3

Table 7-9. Application information pages

Hardware information submenu (S6.8.5)

You can find the following information from the Hardware info submenu (S6.8.5)

Page

I6.8.5.2

I6.8.5.3

Table 7-10. Hardware information pages

Connected options submenu (S6.8.6)

The Connected options submenu (S6.8.6) shows the following information on the option board

connected to the frequency converter:

Page

S6.8.6.1

I6.8.6.1.1

I6.8.6.1.2

S6.8.6.2

I6.8.6.2.1

I6.8.6.2.2

Table 7-11. Connected options submenu

In this submenu you find information about the option board connected to the control board (see

chapter 6.2)

You can check the status of the slot by entering the board submenu with the Menu button right and

using the Browser buttons. Push the Menu button right again to display the status of the board. The

selections are shown in Table 7-5. The keypad will also display the program version of the

respective board when you push either one of the Browser buttons.

Control Keypad

Content

Software package

System software version

Firmware interface

System load

Content

Application

Application id

Version

Firmware interface

Content

Unit voltage

Brake chopper

Content

Slot E Option board

Slot E Option board status

Slot E Program version

Slot D Option board

Slot D Option board status

Slot D Program version

7

75(96)