Sharp AR-122E Service Manual page 83

Main

Sub

code

code

46

19

table setup or AE operation mode setup

When this simulation is executed, the current setup of the gamma table code number is displayed. (Default: Japan = 1, EX Japan = 2)

Enter the code number corresponding to desired gamma table, and press the PRINT switch or the copy mode select key to enable the

setup.

Code number

1

2

When the copy mode select key is pressed during setup of the gamma table, the mode is switched to the AE operation setup mode and

the current setup of the AE operation mode code number is displayed. (Default: 0) Enter the code number corresponding to your

desired AE operation mode, and press the PRINT switch or the copy mode select key to switch the setup. (When the copy mode select

key is pressed, the mode is returned to the gamma table setup mode.)

Code number

0

1

20

SPF exposure correction

Used to adjust the exposure correction quantity in the SPF mode by adjusting the differential of Vref voltage for the OC mode.

(Operating procedure)

When this simulation is executed, the current setup is displayed. Enter the adjustment value with the 10-key and press the PRINT key

to enable the setup and make a copy.

When the CLEAR key is pressed, the entered value is saved and the simulation mode is terminated.

The greater the value is the darker the exposure is.

The smaller the value is, the brighter the exposure is.

29

Image contrast adjustment (600dpi)

Used to set the contrast in each mode.

(Operation/Procedure)

When this simulation is executed, the machine performs warm-up and shading, and the current setup value is displayed in two digits.

(Default: 50)

Use the copy quantity keys to change the setup value, and press the PRINT switch to make a copy with the new setup.

The greater the setup value is, the greater the contrast is, and vise versa. Only EXP.3 copy is made, however, EXP.1 contrast and

EXP.5 contrast are also changed accordingly.

When the CLEAR key is pressed, the entered setup value is saved and the simulation is terminated.

Any copy mode can be selected with the copy mode select key. The setup value of the selected copy mode is displayed on the copy

quantity display.

(Setup range: 0 – 99)

Copy mode

AE mode (600dpi)

TEXT mode (600dpi)

PHOTO mode

TS mode (TEXT) (600dpi)

TS mode (AE) (600dpi)

table

Image quality priority mode

Toner consumption priority mode

AE operation mode

Fixed process * Default

Real time process

Display lamp

AE mode lamp

TEXT mode lamp

PHOTO mode lamp

TEXT mode lamp & PHOTO mode lamp

AE mode lamp & PHOTO mode lamp

AR-122E/152E/153E/157E SIMULATION, TROUBLE CODES 10 - 11

Content