Table of Contents
PICTURE-IN-PICTURE (PIP)
NOTES:
1. The SWAP button will only operate when SINGLE PIP mode or SPLIT PIP mode is chosen.
2. The SWAP function will not operate if ANT B input is set as the main channel (ANT B input
cannot be displayed as a sub-picture.
(3) MOVE button
To move the sub-picture to another corner, press the MOVE button. The sub-picture moves
one step counterclockwise every time the MOVE button is pressed. (Example below illustrates
the MOVE operation for initial shipping conditions. If you have customized a PIP position, the
MOVE operation may differ slightly from this example.)
(4) FREEZE button (With PIP ON)
If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying
to write down the address for a mail order company, recording statistics for a sporting event,
etc. To return the picture to motion, press the FREEZE button again.
NOTE:
The FREEZE function will only operate when SINGLE PIP or SPLIT PIP mode is chosen.
(5) FREEZE button (With PIP OFF)
Press the FREEZE button to freeze the picture depending on the mode selected (SINGLE,
SPLIT or STROBE). To change FREEZE modes, use the THUMB STICK
or
to select
which type of FREEZE mode you wish to view. The new selection will appear the next time
the FREEZE function is used.
39
Hide quick links:
Table of Contents
