Hitachi 46F510 Operating Manual

Projection color tv

Hide thumbs Also See for 46F510:

Service manual (162 pages)

Operating manual (68 pages)

Operating manual (68 pages)

page of 68

/ 68
Contents
Table of Contents

Quick Links

Summary of Contents for Hitachi 46F510

Page 1: Table Of Contents
IMPORTANT SAFETY INSTRUCTIONS ... 2-3 FIRST TIME USE ... 4-19 THE REMOTE CONTROL ... 20-31 ON-SCREEN DISPLAY... 32-58 CARE OF YOUR HITACHI TV AND REMOTE CONTROL ...59 RECEPTION PROBLEMS ... 60 USEFUL INFORMATION ... 61-64 INDEX ...65 As an E product meets the E ®...
Page 2: Important Safety Instructions
HITACHI television. Please fill out your warranty card and mail it to HITACHI. This will enable HITACHI to notify you promptly in the improb- able event that a safety problem should be discovered in your product model.
Page 3 Continuous on-screen displays such as video games, stock market quotations, computer gen- erated graphics, and other fixed (non-moving) patterns can cause permanent damage to television receivers. Such “SCREEN BURNS” constitute misuse and are NOT COVERED by your HITACHI Factory Warranty. PUBLIC VIEWING OF COPYRIGHTED MATERIAL Public viewing of programs broadcast by TV stations and cable companies, as well as programs from other sources, may require prior authorization from the broadcaster or owner of the video program material.
Page 4: First Time Use
Check to make sure you have the following accessories before disposing of the packing material. PART NAME REMOTE CONTROL CLU-4328UG 1. Remote Control Unit is either CLU-4328UG (Part No. HL01838). 2. Two “AA” size, 1.5V batteries (For Remote Control Unit). REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 1.
Page 5: How To Set Up Your New Hitachi Projection Tv
VIEWING The major benefit of the HITACHI Projection Television is its large viewing screen. To see this large screen at its best, test various locations in the room to find the optimum spot for viewing.
Page 6 Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.
Page 7: Front Panel Controls
FRONT PANEL CONTROLS S-VIDEO VIDEO INPUT 5 MENU/SELECT button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode. INPUT/EXIT button Press this button to select the current antenna source, VIDEO: 1, 2, 3, 4, 5 or alternate antenna source.
Page 8 The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: -AUDIO- S-VIDEO VIDEO L/MONO INPUT 5 NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal.
Page 9: Rear Panel Jacks
REAR PANEL JACKS CONVERTER AUDIO TO HI-FI Antenna Input/Output The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a main picture. (ANT B cannot be displayed as a sub-picture.) The antenna output labeled “TO CONVERTER”...
Page 10 Component: Y-P Inputs Inputs 1 and 2 provide Y-P jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may use composite video signal for INPUT:2. NOTES: 1. Do not connect composite VIDEO and S-VIDEO to Input 3, 4 or 5 at the same time. S-VIDEO has priority over VIDEO input.
Page 11: Rear Panel Connections
REAR PANEL CONNECTIONS Outside antenna or cable TV coaxial cable 2-Way signal splitter CONVERTER INPUT Stereo System Amplifier NOTE: Connect only 1 component to each input jack. Follow connections that pertain to your personal entertainment system. Composite video signal can be input to Input2~Input5. Cables are not included with the purchase of this television.
Page 12: Tips On Rear Panel Connections
• S-VIDEO and DVI-HDTV connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature. • If your device has only one audio output (mono sound), connect it to the left audio jack on the television. •...
Page 13 CONNECTING EXTERNAL AUDIO DEVICES To control the audio level of an external audio amplifier with the remote control, connect the system as shown below. CONVERTER INPUT Stereo System Amplifier NOTE: To prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust thesound using the remote control of the TV set.
Page 14: Connecting External Video Sources
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your TV set is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video and audio inputs and outputs.
Page 15 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A MONAURAL AUDIO SOURCE TO INPUT1~INPUT5 Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO) jack. Press the VID4 button to view the program from the VCR or the laserdisc player.
Page 16 CONNECTING A STEREO SOURCE TO INPUT1~INPUT5 Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
Page 17 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5 Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.
Page 18 CONNECTING A COMPONENT SOURCE WITH DVI-HDTV CAPABILITY TO INPUT 1. Connect the DVI connection cable from the output of the HDTV set top box or DVD player to the DVI-HDTV input as shown on the TV set at right. Connect the cable from the AUDIO OUT R of the HDTV set top box or DVD player to the INPUT (AUDIO/R) jack. Connect the cable from the AUDIO OUT L of the HDTV set top box or DVD player to the INPUT (AUDIO/L) jack.
Page 19 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-P B P R . Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set at right.
Page 20: The Remote Control
In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different types of VCRs, CBL (Cable TV) converters, satellite receivers, DVD players, and other audio/video equipment. Basic operation keys are grouped together in one area.
Page 21 HOW TO USE THE REMOTE TO CONTROL YOUR TV TV POWER button PICTURE-IN-PICTURE DAY/NIGHT button SELECT, MENU, CURSOR buttons VOLUME, MUTE buttons CHANNEL SELECTOR buttons POWER button Press this button to turn the TV set on or off when the remote is in TV mode. PICTURE-IN-PICTURE buttons See separate section on pages 25, 26 and 27 for description.
Page 22: How To Use The Remote To Control Your Tv
VOLUME, MUTE button Press the VOLUME up ( ) or down ( ) button until you obtain the desired sound level. To reduce the sound to one half the normal volume (SOFT MUTE), press the MUTE button. Press the MUTE button again to turn the sound off completely (MUTE).
Page 23 HOW TO USE THE REMOTE TO CONTROL YOUR TV ASPECT button Press this button to quickly change the picture format ASPECT ratio. Depending on the input signal, the picture format ratio allows you to adjust the images through the following options. 4:3 Standard Use this aspect mode to display conventional (4:3) images.
Page 24 HOW TO USE THE REMOTE TO CONTROL YOUR TV VIRTUAL HD button Press this button to toggle between 1080i and 540p. INFO button Press this button when you want to check the channel being received, the picture source, if the channel has stereo (ST) or second audio program (SAP), the time and CHANNEL ID.
Page 25 PICTURE-IN-PICTURE (PIP) Your HITACHI Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This Dual Tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each. The Dual Tuner can operate with only one input (ANT A only) or two inputs (ANT A and ANT B).
Page 26 SPLIT MODE PICTURE-IN-PICTURE Split Mode PIP displays the main picture and sub-picture evenly on the screen. Main Picture SURF button PICTURE-IN-PICTURE This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, Press the SURF button a second time to remove the sub-pictures from the screen.
Page 27 PICTURE-IN-PICTURE (PIP) FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE button again.
Page 28: Using The Remote To Control Vcr Functions
USING THE REMOTE TO CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. You must first program the remote to match the remote system of your VCR (refer to page 31 for pre-codes). Turn ON your VCR.
Page 29 USING THE REMOTE TO CONTROL CABLE/SATELLITE BOX FUNCTIONS Operating the precoded function for your cable/satellite box. This remote is designed to operate different types of cable/satellite boxes. You must first program the remote to match the remote sys- tem of your cable/satellite box (refer to page 31). Turn ON your cable/satellite box.
Page 30 Operating the precoded function for your DVD player. This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of your DVD player (refer to page 31 for pre-codes). Turn ON your DVD player.
Page 31 Ecostar ........32 Hitachi ........29 Hughes .
Page 32: On-Screen Display
1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the CURSOR to highlight a different feature, then press SELECT to choose. 3. Press EXIT on the remote control to quickly exit from a menu.
Page 33 ON-SCREEN DISPLAY (OSD) Picture Mode Contrast Brightness Color Tint Video Sharpness Color Temperature Black Enhancement Edge Enhancement Reset Video Settings Color Management Color Decoding Auto Color Noise Reduction Auto Movie Mode Treble Bass Balance Audio Sound Enhancement Audio Source Internal Speakers Auto Noise Cancel Perfect Volume Aspect...
Page 34: Picture Mode
Video Select VIDEO to adjust picture settings and improve picture quality. You can independently customize each of the Video Inputs to your preference to increase viewing performance and pleasure depending upon the video program being viewed. If RESET is selected, only the selected input will reset to initial conditions. Picture Mode Use this function to choose from automatic picture settings to optimize your TV’s performance.
Page 35 VIDEO Video Audio Aspect Chan. Manager Locks MENU Setup Move Use the CURSOR to highlight the function to be adjusted. Press the SELECT button to select the function settings. Press the CURSOR to adjust the function. Press MENU to return to main menu. Press EXIT to quit menu.
Page 36 Reset Video This function allows you to Reset the Video Menu Settings of the present input and return it to the Day VIDEO Settings mode. Video Picture Mode Contrast Brightness Color Tint Sharpness SELECT Color Temperature Black Enhancement Edge Enhancement Reset Video Settings Move Select...
Page 37 This involves a process known as 3:2 pulldown. When Auto Movie Mode is turned ON from the VIDEO menu, your Hitachi Projection Television will activate the circuitry for this special feature to improve video performance when watching film based sources.
Page 38 Audio Select AUDIO to adjust the TV to your preference and to improve the sound quality. Video Audio Aspect Chan. Manager Locks MENU Setup Move Press CURSOR , to select menu item. Press CURSOR to adjust the function. Press EXIT to quit the MENU, or select Audio to return to the main menu. NOTE: If TREBLE is selected you are adjusting treble.
Page 39 Based on the principles of the human hearing system, SRS technology delivers and exciting and realistic 3D Sound experience from just two external speakers (or) the two internal speakers of your HITACHI Television. If your HITACHI Television is connected to an external audio system, SRS will also create an incredible 3D sound experience from two speakers and even enhance a complete multi-speaker surround sound system.
Page 40 Aspect Mode Use this function to select the Picture Format Aspect Ratio. Video Audio Aspect Chan. Manager Locks MENU Setup Move Auto Aspect Automatically adjust the Aspect Ratio depending on the input signal to fill the screen. Press CURSOR , to select menu item. Press the SELECT button to select.
Page 41 CHANNEL MANAGER Chan. Manager Select ANTENNA if you are using an indoor or outdoor antenna. Select Cable if you have cable TV. Chan. Manager Ant. A Ant. B Return Move Chan. Manager Ant. A Channel Source Antenna Cable(1) Auto Channel Scan Channel List Move Select...
Page 42 This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip Auto Channel Scan unused channels when using CHANNEL UP ( ) or DOWN ( ). Chan. Manager Ant. A Channel Source Antenna Cable(1) Auto Channel Scan Channel List...
Page 43 CHANNEL MANAGER Channel List This function allows you to review which channels are labeled (CH ID), which have been added to Channel Memory (SCAN), and which are protected by LOCK. Chan. Manager Ant. A Channel Source Antenna Cable(1) Auto Channel Scan Channel List Move Select...
Page 44 Channel ID This section contains advanced features which will make TV viewing easier and more enjoyable. Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 chan- nels a name when CATV signal source is selected. Chan.
Page 45 LOCKS Locks This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed for a scheduled time period that you set. The code to enter the Locks feature is a four digit secret code number. The factory preset code is 0000. Use the number buttons to select secret code.
Page 46 Movie Ratings Use MOVIE RATINGS to prevent viewing of any movie that you feel may be inappropriate due to its content. Locks Change Access Code Engage Lock TV Time Lock Movie Ratings TV Ratings MENU Canadian Ratings (Eng) Canadian Ratings (Frn) Move Select Use CURSOR...
Page 47 LOCKS TV Ratings Use TV RATINGS to prevent the viewing of any TV program that you feel may be inappropriate due to its content. Locks Change Access Code Engage Lock TV Time Lock Movie Ratings TV Ratings MENU Canadian Ratings (Eng) Canadian Ratings (Frn) Move Select...
Page 48 Canadian Ratings Use Canadian Ratings (Eng) to block any type of movie and television program in Canada that (Eng) you feel might be inappropriate in its content. Locks Change Access Code Engage Lock TV Time Lock Movie Ratings TV Ratings MENU Canadian Ratings (Eng) Canadian Ratings (Frn)
Page 49 LOCKS Canadian Ratings Use CANADIAN RATINGS (FRN) to block Canadian French programs according to various pro- (Frn) gram ratings that you feel might be inappropriate in its content. Locks Change Access Code Engage Lock TV Time Lock Movie Ratings TV Ratings MENU Canadian Ratings (Eng) Canadian Ratings (Frn)
Page 50 Setup Select SETUP when setting your TV up for the first time. Use the CURSOR function desired. Video Audio Aspect Chan. Manager Locks MENU Setup Move Use CURSOR to select the sub-menu of your choice. on the remote to highlight the Setup Magic Focus Tune Up Menu Preference...
Page 51: Magic Focus
The Magic Focus button on control panel will not work when adjustment mode is set to Manual (see page 52). Your HITACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color.
Page 52 Manual Convergence Adjustment Mode NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode. If Auto Adjust mode is selected or the Magic Focus button is pressed, all manual adjust mode settings will be erased. Using the Remote Control, select SETUP-MAGIC FOCUS TUNE UP-MANUAL ADJUSTMENT MODE-START to access convergence crosshatch pattern.
Page 53 SETUP Menu Preference This feature will allow you to select any one of three different languages for all on-screen displays. Setup Magic Focus Tune Up Menu Preference Set The Clock Set The Inputs Set The Color System MENU Set Virtual HD Set Black Side Panel Set Event Timer Set Closed Caption...
Page 54 Menu Background This function allows you to choose from two menu backgrounds. Use CURSOR to highlight SET THE MENU BACKGROUND (shaded or solid), and press the SELECT button to select setting. Press EXIT to quit menu or CURSOR Select SOLID for a black background (no picture can be seen behind menu screen), or select SHADED for a light background. Set The Clock The clock must be adjusted before you can use the “Set Event Timer”...
Page 55 SETUP Set The Inputs Use this feature to give a name to any of the five video inputs. Setup Magic Focus Tune Up Menu Preference Set The Clock Set The Inputs Set The Color System MENU Set Virtual HD Set Black Side Panel Set Event Timer Set Closed Caption About Your TV...
Page 56 Set The Color This function allows you to automatically change tint and color coordinates for DTV programs. System HDTV - High Definition Television - Use for High Vision Signal Y-P SDTV/DVD - Standard Definition Television or DVD (Digital Versatile Disc Player) Y-C NOTES: 1.
Page 57 SETUP Set Event Timer This function will reserve viewing time for a program. If the clock is not set, you can not use this function and the screen below will appear. The message on the screen will disappear after 3 seconds, then the screen automatically goes to the clock setup mode (see page 54). Setup Magic Focus Tune Up Menu Preference...
Page 58 , a n d fixed (non-moving) patterns cause permanent damage. Such “SCREEN BURNS” are not covered by your Hitachi Factory Warranty. Move Return SELECT display on or off. display on when Mute/Soft Mute is on. to return to previous menu.
Page 59: Care Of Your Hitachi Tv And Remote Control
CARE OF YOUR HITACHI TELEVISION AND YOUR REMOTE CONTROL Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty.
Page 60: Reception Problems
NOTE: The TV set can generate sound distortion in external devices such as a radio. Please separate radio equipment from the TV set to a considerable distance. • IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances.
Page 61: Useful Information
3. If there is still no power, unplug the power cord from the wall. Wait 30 seconds and plug the power cord back in. Press the power switch again. This protective technology should provide for years of lasting entertainment from your HITACHI Projection Television. Picture blurred...
Page 62 Features: • Superfine Picture Quality 1280 Line Horizontal Resolution • Remote (Controls many VCRs, DVD players, cable boxes, and satellite boxes.) • New Easy-to-Use (3-Language) On-Screen Menu • Full Set of Input Jacks, including S-VIDEO • COMPONENT VIDEO: Y-P • Velocity Modulation •...
Page 63 Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will provide you with convenient and expedient assistance.
Page 64 Hitachi Canada, LTD. Digital Media Division Should you have any questions regarding warranty, service, operation, or technical assistance, please contact: Look for your French Manual on the outside of the box. If the manual is missing, call for a copy.
Page 65: Index
INDEX Accessories, 4 Antennas (Connecting), 5, 6 Aspect Ratio, 23 Audio (Sound Enhancement) SRS, 39 BBE, 39 Audio Settings, 38 - 39 Audio Source, 38 Auto Color, 37 Auto Noise Cancel, 38 Balance, 38 Bass, 38 Black Enhancement, 35 Black Side Panel, 56 Brightness, 35 Channel Manager, 41 - 43 Channel Setup, 42...
Page 66 NOTES...
Page 67 NOTES...
Page 68 QR62281...

This manual is also suitable for:

46f500a

Hitachi 46F510 Operating Manual

Quick Links

Related Manuals for Hitachi 46F510

Summary of Contents for Hitachi 46F510

This manual is also suitable for:

Table of Contents