Preparation; Supplied Accessories; Mobile Installation - Kenwood TM-V71A Instruction Manual
144/440 mhz fm dual bander 144/430 mhz fm dual bander
Hide thumbs
Also See for TM-V71A:
- Instruction manual (60 pages) ,
- Service manual (104 pages) ,
- Service manual (4 pages)
Table of Contents
SuPPlIEd AccESSORIES
Note: A type code (K, E, or M4) can be found on the label attached to the package box.
Microphone
Microphone hanger
DC power cable
(with 20 A fuses)
Mounting bracket
Screw set
Fuse (5 A)
Warranty Card
Instruction manual
MOBIlE INSTAllATION
Select a safe, convenient location inside your vehicle that will minimize danger to
your passengers and yourself while the vehicle is in motion. Consider installing
the transceiver under the dash in front of the passenger seat so that knees or legs
will not strike the radio during sudden braking of your vehicle. Try to a pick
well-ventilated location that is shielded from direct sunlight.
Note: You may experience interference on your GPS receiver when using in or around 438.8 MHz
(A band) and/or 443.8 MHz (B band). To eliminate the interference, ensure that the transceiver is
installed at a location separate from your GPS receiver.
1 Install the mounting bracket in the vehicle using the supplied self-tapping
screws and flat washers (4 of each are supplied).
• The bracket can be mounted with the bracket opening facing down, for underdash
mounting, or facing up.
• The bracket must be installed so that the 3 screw slots on the edge of each bracket
side are facing the back.
PREPARATION
Item
K, M4 types
E type
K, M4 types
E type
K, E types only
Part Number
T9-0657-XX
J9-584-XX
E30-7628-XX
E30-3452-XX
J29-0628-XX
N99-033-XX
F5-0079-XX
F52-0024-XX
——
B62-926-XX
Self-tapping screw
(5 x 6 mm)
Flat washer
Quantity
Hide quick links:
Table of Contents
