Table of Contents
•
% aureplicationlocal –unit subsystem-name –ss –refer
Pair name
Copy Type
SS_LU0200_LU1001
SnapShot
%
% aureplicationlocal –unit subsystem-name –ss –restore –pvol 200
–svol 1001
Are you sure you want to restore pair?
(y/n[n]): y
The pair has been restored successfully.
%
3. Execute aureplicationlocal to restore the pair. Refer to the following
example.
•
% aureplicationlocal –unit subsystem-name –ss –refer
Pair name
Copy Type
SS_LU0200_LU1001
SnapShot
%
V-VOL to P-VOL is restored.
Releasing SnapShot Pairs
To release the Snapshot pair and change the status to Simplex:
1. From the command prompt, register the subsystem to which you want
to release the SnapShot pair, then connect to the subsystem.
2. Execute the aureplicationlocal command release the pair. Refer to
the following example.
•
% aureplicationlocal –unit subsystem-name –ss –simplex –pvol 200
–svol 1001
Are you sure you want to release pair?
(y/n[n]): y
The pair has been released successfully.
%
3. Execute aureplicationlocal to release the pair. Refer to the following
example.
•
% aureplicationlocal –unit subsystem-name –ss –refer
DMEC002015: No information is displayed.
%
The Snapshot pair is released.
Hitachi Simple Modular Storage Copy-on-Write SnapShot User's Guide
LUN Pair LUN Status
Group
200 1001
---:Ungrouped
LUN Pair LUN Status
Group
200 1001
---:Ungrouped
Operations Using CLI
Split(100%)
Paired( 40%)
A–7
Hide quick links:
Table of Contents
