Pwr Save In Err - Canon LBP5360 User Manual
Hide thumbs
Also See for LBP5360:
- Release note (3 pages) ,
- Specifications (2 pages) ,
- Brochure & specs (12 pages)
Table of Contents
PWR SAVE IN ERR
POWER SAVE TIME
6
WARNING STEP
6-14
SETUP Menu Settings
ON*, OFF
Specifies whether the printer should enter Power Save Mode when an error is
occurring in the printer (when the
the message blinks).
If this item is set to ON, the printer enters Power Save Mode even when an error is
occurring in the printer.
If this item is set to OFF, the printer does not enter Power Save Mode when an
error is occurring in the printer.
30 minutes*, 60 minutes, 180 minutes, 5 minutes, 15 minutes
Specifies the time interval until the printer enters Power Save Mode 1 (the Panel
Off mode).
NOTE
If the printer is in any of the following status, the printer does not enter Power Save
•
Mode (the Panel Off mode) even when the specified time has elapsed.
- An error is occurring in the printer (when the
number in the message blinks), and PWR SAVE IN ERR is set to OFF.
- During the printer's startup
- During a shutdown (Only when the hard disk is installed)
- While the hard disk is being initialized (Only when the hard disk is installed)
CHECK TONER ................... CONT.PRINTING*, STOP PRINTING
Specifies whether the printer should continue or stop printing when the following
message appears.
Warning Message
<16 PREP."color" TNR>
("color" indicates K, Y, M,
or C)
If CONT.PRINTING is specified, the printer continues printing, displaying the
above message. If STOP PRINTING is specified, the printer stops printing. Then,
the printer resumes printing after you release the printer from the Warning status
according to the displayed message.
(Message) indicator is on, or the number in
(Message) indicator is on, or the
Printer Status
The toner cartridge is nearing the end of its life and
needs to be replaced.
- Quick Links:
- Message List
Hide quick links:
Table of Contents
