Usb Configuration - Asus P5KPL User Manual

SB Over Voltage [Auto]

Allows you to manually set ICH chipset voltage or Auto for safe mode.

Configuration options: [Auto] [1.5V] [1.6V]

NB Over Voltage [Auto]

Allows you to manually set MCH chipset voltage or Auto for safe mode.

Configuration options: [Auto] [1,30V] [1,35V] [1.40] [1.45]

CPU Vcore Over Voltage [Auto]

Allows you to manually set FSB termination voltage or Auto for safe mode.

Configuration options: [Auto] [OMV] [50MV] [100MV] [150MV]

Memory Over Voltage

Allows you to set the Memory Over Voltage. Use +/- to adjust the voltage. The increment is

0.00625V. The standard value is 1,85000V.

Configuration options: [Auto] [Min = 1,850000V] [Max = 2.24375V]

2.4.2

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then

press to display the configuration options.

The Module Version and USB Devices Enabled items show the auto-detected values. If no

USB device is detected, the item shows None.

USB Functions [Enabled]

Allows you to disable or enable the USB functions. Configuration options: [Disabled]

[Enabled]

[8 U S B Ports]

USB 2.0 Controller [Enabled]

Allows you to enable or disable USB 2.0 controller.

Configuration options: [Enabled] [Disabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for Legacy USB storage devices, including USB

flash drives and USB hard drives. Setting to [Auto] allows the system to detect the presence

of U S B devices at startup. If detected, the USB controller legacy mode is enabled. If no USB

device is detected, the legacy USB support is disabled. Configuration options: [Disabled]

[Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480Mbps) or Full Speed

(12Mbps). Configuration options: [FullSpeed] [HiSpeed]

ASUS P5KPL/EPU

1-11