Table of Contents
ADVANCED OPERATION
AUDIO DUBBING
RECORDING SOUND ON TO A VIDEO TAPE (AUDIO DUBBING)
This feature enables you to add narration or background music to a pre-recorded tape.
•
The audio signal will be recorded on the mono track. The Hi-Fi track will remain
unchanged:
Connect your
audio equipment
to AUDIO IN L-R
terminals on the
front of your VCR.
1.
Connect the audio source to the AUDIO
IN L-R terminals on the front of the VCR
as shown above.
2.
Insert the pre-recorded tape into the
VCR.
3.
Press
PLAY/X2
recording.
4.
If you wish to listen to the original Hi-Fi
track while you are recording the new
dubbed audio track you will need to set
AUDIO MIX to ON in the MODE menu.
5.
PAUSE/STILL (
Press
reach the point on the tape where you
want audio dubbing to start.
6.
Press
A.DUB
(
A.DUB
on your TV).
NOTE:
The input source will be
automatically changed to L3 (Front
phono jacks).
7.
PAUSE/STILL (
Press
dubbing.
8.
Press
STOP
(
(
A.DUB
will disappear from your TV).
If a microphone is to be used,
connect it to your audio
equipment.
(
) to view the
)
when you
will be shown
)
to start audio
) to finish audio dubbing
+
AUDIO SOURCE
II A. DUB
SP
GB-22
L3
Table of Contents
