Summary of Contents for Northern Industrial Tools 1200-LB
Page 1
1200-LB. CAPACITY DUMP CART OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item# 23317...
Thank you very much for choosing a NORTHERN INDUSTRIAL TOOLS product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
Page 3
DUMP CART USE AND CARE • Do not modify the dump cart in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the equipment. There are specific applications for which the dump cart was designed. •...
NOTE: You may have extra nuts and bolts when finished. TOOLS REQUIRED Pliers Screwdriver 10mm & 13mm Wrench ASSEMBLY STEP 1: Attach Bottom Panels and Support Tubes 1. Put the left bottom panel and right bottom panel together. 2.
STEP 2: Attach Tongue Support 1. Attach the tongue support to the bottom panel using four sets of M6x16 screws and M6 nylon lock nuts. STEP 3: Attach the Wheel Axle Support 1. Put together the two wheel axle support stand, attached them to the bottom panel using eight sets of the M8x16 Screws and M8 nylon lock nuts.
STEP 4: Attach Wheel Axle 1. Center the hitch tongue assembly in the wheel axle support. 2. Insert the axle through the hole and slide it through both the axle support and the hitch tongue assembly. 3. Tighten all hardware in step 3. STEP 5: Attach the Wheels 1.
STEP 6: Attach Side Panel 1. Attach the left and right side panel assemblies to the bottom panel using the four hinge pins. STEP 7: Attach the Front Panel 1. Attach the front panel to the bottom panel and secure using the two hinge pins. 2.
STEP 8: Attach Rear Panel 1. Slide the rear panel through the slots on the back side panels. NOTE: The rear panel pins must go through the holes on the side panels to lock the panel in place. STEP 9: Attach Side Rails and Front Rail 1.
Page 9
OPERATION WARNING: Before using the utility dump cart, review the instructions below and safety information. Failure to follow these instructions may result in property damage or injury to the operator or bystanders. USING YOUR UTILITY DUMP CART 1. DO NOT exceed rated capacity of 1200 lbs. (544.8kg). 2.
Page 11
Part# Description Qty. Part# Description Left Bottom Panel Hitch Pin Hitch Pin Bracket Wheel Axle Support Hitch Tongue Handle A Left Side Panel Handle B Right Side Panel Handle Sleeve Side Rail R Pin Ø3 Front Panel Flat Washer Ø6 Front Rail Flat Washer Ø8 Release Pedal...
Page 12
WARRANTY One-year limited warranty Distributed by Northern Tool + Equipment Co., Inc. Burnsville, Minnesota 55306-6936 NorthernTool.com Made in China Page of 12...