Easy Key Function; Display Selection - Toshiba TOSVERT VF-AS1 Instruction Manual
The new high-performance inverter tosvert
Hide thumbs
Also See for TOSVERT VF-AS1:
- Instruction manual (334 pages) ,
- Function manual (49 pages) ,
- Option instruction manual (18 pages)
Table of Contents
5.22
EASY key function
• Function
The following three functions can be assigned to the EASY key for easy operation by means of a single key.
• Setting monitor mode switching function
• Shortcut key function
• Operation panel/remote key function
[Parameter setting]
Title
5
Quick mode/standard setting mode switching function (
The EASY key allows you to switch between quick mode and standard setting mode.
The way parameters are read out and displayed varies according to the mode selected.
Quick mode
This mode allows you to previously select parameters (max. 32 parameters) whose settings need to be changed
frequently and to read them out only. Eight parameters are selected by default; add or remove parameters as
required.
Standard setting mode
Standard setting mode in which all parameters are read out.
[How to read out parameters]
To enter the setting monitor mode, set parameter
key, and then press the MODE key.
Press the
The relation between the parameter and the mode selected is shown below.
* Standard setting mode at time of activation of motor. Press the EASY key to switch to the quick mode.
* Quick mode at time of activation of motor. Press the EASY key to switch to the standard setting mode
* Quick mode (fixed).
: Registered parameter
display selection
: EASY key function selection
Function
Registered parameter
display selection
EASY key function
key or the
key to read out parameters in ascending or descending order.
=
=
=
~
Quick registration parameter 1~32
Adjustment range
: Standard setting mode at time of activation
of motor
: Quick mode at time of activation of motor
: Quick mode only
: Quick mode/ standard setting mode
switching function
:Shortcut key:
Pressing for 2 sec. to record the parameter,
pressing normally to jump to recorded
parameter (first jump to the 1st history)
:Operation panel/remote key:
Operation panel by ON
: Monitor peak minimum hold trigger
= )
to
, switch to the setting monitor mode using the EASY
E-44
E6581301
:
Default setting
Table of Contents
