Table of Contents
Useful viewing functions
Display settings
Channel display
You can display the channel information by pressing p
on the remote control unit.
DTV mode
Audio (ENG)
STEREO
Video
Subtitle
Off
>> New information
SAT mode
Audio (ENG)
Video
Subtitle
>> New information
I
Four digit numbers (e.g., 0001) are displayed after selecting the
five Nordic countries in the country setting.
J
Satellite channels are displayed by four digit numbers (e.g.,
0001).
K
You can set four satellite stations to "SAT1", "SAT2", "SAT3",
"SAT4".
E
Time display in channel information
You can display the time information included in DTV, SAT
and teletext broadcasts.
NOTE
•
Skip step 1 if receiving DTV/SAT broadcasts.
1
Select a TV channel (the time information is
automatically captured).
2
Press p. The channel display will appear on
the TV.
3
Press p again within the several seconds
that the channel display is on the screen. Time
information will be shown in the lower-right
corner of the screen for several seconds.
4
Even when you change the TV channel, you
can display the time information with steps 2
and 3 above.
NOTE
•
If acquired successfully, the time information will appear in the
upper-right corner of the screen by pressing @.
ATV mode
Auto
MONO
Subtitle
STEREO
Off
Time and title display
View setting
Time display
Go to "Menu" > "Setup" > "View setting" >
"Individual setting" > "Time display".
Time display
This function allows you to display the clock time in the
lower-right corner of the screen.
On
Displays the clock time.
Displays the clock time in 30-minute
On (half-hourly)
increments.
Off
Hides the clock time.
Time format
You can select the time format (either "24HR" or "AM/
PM") for the clock time.
Option
Game play time
This function allows you to display the elapsed time on
the screen when "AV mode" is set to "GAME".
Go to "Menu" > "Setup" > "Option" > "Game
play time".
Under connecting a game console to
the TV, the elapsed time is displayed
On
in 30-minute increments after you start
playing a game.
Off
Hides the time.
NOTE
•
This menu is not selectable if the input source is "TV" or "USB".
Option
Programme title display
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
Go to "Menu" > "Setup" > "Option" > "Screen
effect" > "Programme title display".
NOTE
•
This function is available only when the DTV/SAT mode is
selected.
Item
Item
41
- Quick Links:
- Troubleshooting
Hide quick links:
Table of Contents
