Additional Information - Panasonic TH-65PB1E Function Manual

Replacing the pen tip of the Electronic Pen

As the pen tip of the electronic pen becomes worn, the pen tip will no longer slide easily across the screen.

Continuing to use the electronic pen in this condition may make the screen dirty and cause malfunction.

Replace the pen tip with a new one as soon as possible.

1.

Remove the pen tip cover.

3.

Reattach the pen tip cover.

Notice

•

Turn off the electronic pen before replacing the pen tip.

Attaching the pen holder

To store the electronic pen, attach the included pen holder to the Interactive Plasma Display.

1.

From the eight positions below, select the position to attach the pen holder and remove the screws.

2.

Attach the pen holder to the position where you removed the screws.

•

Fix the pen holder with the screws you removed.

Notice

•

Attach two pen holders one on each side. If two pen holders are attached to the same side, one on top

of the other, the lower pen holder cannot hold the pen.

16

2.

Remove the old pen tip and attach the new one.

•

Attach the pen tip in such a way that the

projection of the pen tip is aligned with the

cutout of the pen body.

•

Be careful not to lose the spring when

replacing the pen tip.

Spring

Projection

Cutout