Table of Contents
List of Functions
Sub Menu
Subnet Mask
Gateway Address
MAC Address
IP Address Display
Mail menu
When this is set, you receive an e-mail notification if a problem or warning occurs in the projector.
Sub Menu
Mail Notification
SMTP Server
Port Number
Email Address 1/Email
Address 2/Email Address 3
g
You can input the subnet mask
for the projector. You can enter a number from 0 to 255 in each field of the address. However, the following
Subnet Masks cannot be used.
0.0.0.0, 255.255.255.255
You can input the IP address for the gateway for the projector. You can enter a number from 0 to 255 in each field of the address. However, the
g
following gateway addresses
cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Displays the MAC address.
To prevent the IP address from being displayed on the LAN Standby screen, set this to Off.
You can set whether or not (On/Off) to be notified by e-mail.
g
You can input the IP Address
for the SMTP Server for the projector.
You can enter a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
You can input the Port Number for the SMTP Server. The default value is 25. You can input numbers between 1 to 65535.
You can input the e-mail address of the destination to send the notification e-mail to. You can register up to three destinations. You can enter up to
32 single-byte alphanumeric characters for the e-mail addresses.
Function
p.121
s
Function
69
Hide quick links:
Chapters
Table of Contents
