Page 1: Table Of Contents
Video Cassette Recorder Operating Instructions Bedienungsanleitung Mode d’emploi Model No. Istruzioni per l’uso Gebruiksaanwijzing NV-FJ730 Series δηγίες ειρισµ ύ Contents Page Warning and Important Information Controls and Components Menu Operation VCR Operation TV Operation Connecting and Setting up Playback Recording...
Page 2: Warning And Important Information
Cautions before you operate this VCR Warning and Important Information Avoid: • Humidity and dust. • Extreme heat such as direct sunlight. As this equipment gets hot during use, operate it in • Magnets or electromagnetic objects. a well ventilated place; •...
Page 3: Controls And Components
ENGLISH Controls and Components INTELLIGENT TIMER EJECT A.DUB TIMER REC AV3 IN VIDEO L/MONO AUDIO EXT LINK REC/OTR AUDIO OUT/SORTIE AV2 ( DECODER/DECODEUR/EXT ) AV1 ( TV ) L /G AC I N SECTEUR R /D SORTIE (1) [VCR-ON/OFF]/[TV-ON/OFF] (36) [DIRECT TV REC] (2) [Numeric] (37) [Teletext] AV LINK...
Page 4: Vcr Operation
List of TVs Compatible with the VCR’s Remote Control [TV]. [Brand] [Code] [Brand] [Code] [TV-ON/OFF] (1) Panasonic 01–04 NOKIA 25–27 To switch the TV on from standby mode or vice versa. On some TVs it is only possible to switch the TV to standby AIWA NORDMENDE mode with this button, but not on.
Page 5: Connecting And Setting Up
Hints: 21-pin Scart cables all 21 pins of one plug are connected to the • If you use a Panasonic TV, starting the downloading of the setup matching pin of the plug on the other end of the cable. data will automatically display the [Download] indication. However, in case of a TV of another make, the [Download] indication may not appear.
Page 6: Preset Download
VCR’s clock to the current date and Use) time. 1) Switch the TV on. 1) Press the [VCR-ON/OFF] (1) to Panasonic VCR Country Belgien Deutschland 2) Select the AV input on your TV. turn on the VCR.
Page 7 4 Aerial lead (not supplied) you set [Power save] to [ON]. In this setting, the VCR’s power consumption is minimised when it is off (Standby mode). To turn Panasonic VCR the VCR on, keep the [VCR-ON/OFF] (1) pressed on the VCR Country...
Page 8: Playback
To Play back S-VHS Cassette Tape Playback (SQPB=S-VHS Quasi Playback) It is also possible to play back tapes recorded in the S-VHS For Normal Playback system. Press the [Play] (26). • Some picture noise may occur depending on the type of tape used.
Page 9: Recording
To Select the Recording Duration and Recording Perform Timer Recording (OTR=One-Touch Recording) 1) Insert a video cassette with an intact erasure prevention 1) Press the [REC/OTR] (48) to start recording. tab. • If it has already been inserted, press the [VCR-ON/OFF] (1) to 2) Press the [REC/OTR] (48) on the VCR repeatedly to turn the VCR on.
Page 10: Satellite Or Digital Receiver
Recording from an external source Satellite or Digital Receiver Recording from an external source, for example from a video movie camera, can be performed. Connecting the VCR to a Satellite Receiver or Digital Receiver INTELLIGENT TIMER If the satellite receiver is equipped with a 21-pin scart socket AV2 ( DECODER/DECODEUR/EXT ) AV1 ( TV ) AV3 IN...
Page 11: Connecting A Stereo Amplifier
Linked Timer Recordings by External Connecting a Decoder Equipments (EXT LINK) If an external equipment (for example a satellite receiver) Decoder here refers to the device used to decode scrambled with a timer function is connected to the AV2 socket of this broadcasts (Pay TV).
Page 12: Timer Recording
Programming the timer recording of a TV programme number 721114 broadcast on programme position 2 (ZDF) from 20:00 to 1) Press the [SV/V+] ([ShowView]) 21:30 on 27 October. Panasonic VCR (30) to display the menu for ShowView Panasonic VCR 1) Press the [PROG./CHECK] (14)
Page 13 If [ss] Appears under [Pos/Name] after To Check, Change or Cancel Timer Entering a S Number Recording Programmings 1) Press the [PROG./CHECK] (14) to display the timer Pos/Name stands for Programme Position/TV Station Name. Normally, the name of the TV station or the number of the recording programmings on the TV screen.
Page 14: Intelligent Timer Function
1) Press the [I-TIMER] (15) to display the menu. The Intelligent Timer Function remembers the channel 2) Press the [Cursor] (38) 43 to number along with the start and end times of the last Panasonic VCR INTELLIGENT TIMER 27 / 10 / 02 select the programme details that...
Page 15: Search Functions
15 minutes long. (25 minutes in the EP mode) moving and still pictures) and create the equivalent of a photo album, but on video cassette. 1) Press the [LIBRARY/SEARCH] Panasonic VCR Programme List (4) to display the Programme Name...
Page 16: Manual Tuning
TV station or change a TV station, you can set it AV3 IN VIDEO L/MONO AUDIO R EXT LINK up manually. Panasonic VCR 1) Press the [MENU] (7) to display Main menu the Main menu on the TV Timer recording screen.
Page 17 2) Press the [Cursor] (38) 34 to select [Tuning]. Press the [MESECAM]. [OK] (24) to display the Tuning menu on the TV screen. PAL: For receiving PAL signals. Panasonic VCR 3) Press the [Cursor] (38) 34 to MESECAM: For receiving SECAM signals. Tuning select [Auto-Setup Restart],...
Page 18: Setting The Vcr's Clock
1) Press the [MENU] (7) to display the Main menu on the To Manually Adjust the Clock TV screen. 1) Press the [MENU] (7) to display the Main menu on the TV screen. Panasonic VCR 2) Press the [Cursor] (38) 34 to Other settings select [Other settings]. Press the Panasonic VCR...
Page 19 VCR and standby mode. After all programmed timer recordings have been another Panasonic VCR in the same place. made, and after all programmed data have been erased, the VCR This ensures that you can operate both switches over to the Power save mode.
Page 20: Other Function
To Play Back NTSC Video Cassettes on Other Function Your PAL TV (Quasi-NTSC Playback Function) Indications that Can Be Displayed on the This VCR allows playback of tapes recorded in the NTSC TV Screen system on a normal PAL system TV with the same At a press of the [OSD/DISPLAY] operations as usual.
Page 21: Before Requesting Service
Convenient Automatic Functions Before Requesting Service VCR Auto Power On When you insert a video cassette, the VCR switches on automatically. On Screen Display Messages The error messages are given in brackets [ ]. Auto Playback Start When you insert a video cassette with a broken erasure [Please insert video tape!] •...
Page 22 The VCR Does Not Work Correctly Recording Is Not Possible or Does Not Work Properly [When recording is attempted, the 1 indication flashes.] [The VCR display is not illuminated.] • The AC mains lead is disconnected. • A video cassette with a broken out erasure prevention tab is used. Connect the AC mains lead securely.
Page 23: Index
Index ∫ ∫ Review ...........8 Audio ..........18, 20 JET SEARCH ........8 Rewind ...........8 ∫ Audio dubbing ........16 RF ..........5, 6, 7 ∫ Auto Setup ........6, 17 Language setting ......... 19 AV input ..........4 LP ..........8, 9, 13 Satellite receiver ........10 ∫...

Panasonic NV-FJ730 Series Operating Instructions Manual

Quick Links

Related Manuals for Panasonic NV-FJ730 Series

Summary of Contents for Panasonic NV-FJ730 Series

Table of Contents