Samsung SNO-7080R User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SNO-7080R
  6. User manual

Samsung SNO-7080R User Manual

Hide thumbs
Table of Contents

Quick Links

NETWORK CAMERA

User Manual
SNO-7080R
Table of Contents
loading

Related Manuals for Samsung SNO-7080R

Summary of Contents for Samsung SNO-7080R

  • Page 1: Network Camera

    NETWORK CAMERA User Manual SNO-7080R...

  • Page 2: User Manual

    Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

  • Page 3: Important Safety Instructions

    overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

  • Page 4: Explanation Of Graphical Symbols

    overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location.
  • Page 6 overview Please read the following recommend safety precautions carefully.  Do not place this apparatus on an uneven surface.  Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. ...

  • Page 7: Table Of Contents

    CONTENTS Important Safety Instructions OVERVIEW Product Features Recomended PC Specifications Recomended SD/SDHC Memory Card Specifications What’s Included At a Glance Memory Card Information INSTALLATION & Connecting with other Device CONNECTION Connecting the Camera Directly NETWORK CONNECTION to Local Area Networking AND SETUP Connecting the Camera Directly to a DHCP Based DSL/Cable...

  • Page 8: Overview

    overview WEB VIEWER Connecting to the Camera Login Installing ActiveX Installing Silverlight Runtime Using the Live Screen Playback Setup SETUP SCREEN Audio & Video Setup Network Setup Event Setup System Setup Specification APPENDIX Product Overview Troubleshooting Open Source Announcement License GPL/LGPL Software License 8_ overview...

  • Page 9: Product Features

    The dustproof and waterproof design makes you feel at ease when installing the product outdoors or exposing it to rain. • SSNR3 (Samsung Super Noise Reduction) The powerful DSP chip reduces the gain noise effectively to remove the time lag so that it can provide a sharp and clear image in a low contrast scene.

  • Page 10: Recomended Pc Specifications

    overview • Video Motion Detection Detects a motion from the video before triggering an event. • Face Detection / Smart Codec Recognizes a face from the camera input video, or transfers a clearer image of your specified area. • Auto Detection of Disconnected Network Detects network disconnection before triggering an event.

  • Page 11: What's Included

    WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Camera User Manual, Installer S/W CD, CMS S/W DVD Quick Guide Tapping Screw Used for installation on the wall or ceiling L Wrench Used to adjust the camera orientation It protects the camera from the direct...

  • Page 12: At A Glance

    overview AT A GLANCE Front Side Item Description Sunshield It protects the camera from the direct sunlight. Sunshield Hold It fixes the sunshield with the camera. IR LED These infrared LED's are controlled by the illumination sensor. Illumination Sensor Detects incoming light to control the IR LED. ...
  • Page 13 Rear Side Item Description Power Port Used to plug the power cable. Network Port Used to connect a PoE or LAN cable. Connected to the monitor so that you can check the video from the camera. Video Output Port (for installation) Audio In Jack Used to connect to a microphone.
  • Page 14 overview Item Description ARM-IN Used to connect the alarm input sensor. Earth-grounding port for external signal. ARM-OUT Used to connect the alarm output signal. I/O Port Common port where the alarm output signal is A-COM connected. Resets the camera settings to the default. ...

  • Page 15: Installation & Connection

    installation & connection MEMORY CARD INFORMATION What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Memory Card Instructions •...

  • Page 16: Ethernet Connection

    installation & connection Connecting to the monitor Use the BNC cable to connect the video output port of the camera with the video input port of the monitor.  In the initial installation of the camera, you can connect the camera to the monitor for checking the connection status.
  • Page 17 Connecting to Audio Input/Output Speaker Microphone Network Microphone Microphone Speaker 1. Connect the AUDIO IN port of the camera with the microphone directly or LINE OUT port of the amplifier that the microphone is connected to. 2. Connect the AUDIO OUT port of the camera with the LINE IN port of the speaker. 3.
  • Page 18 installation & connection Connecting the alarm I/O signal Connect the alarm input/output signal using the I/O ports of the cable. ALARM SENSOR Port Description Port Description ARM-IN Alarm Input Sensor Port Earth-grounding Port ARM-OUT Alarm out A-COM Alarm Out (common) To connect the alarm input signal Connect one strand of each signal line (2-strand) of the sensors to the [ARM-IN] port, and connect the other strand to the [GND] port.

  • Page 19: Network Connection And Setup

    network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2.

  • Page 20: Connecting The Camera Directly To A Dhcp

    network connection and setup CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM INTERNET DSL/Cable Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2.

  • Page 21: Modem

    CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM INTERNET PPPoE Modem External Remote PC Camera DDNS Server (Data Center, KOREA) 1. Use the cross LAN cable to connect the network cable directly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 22: Connecting The Camera To A Broadband Router With The Pppoe/Cable Modem

    network connection and setup CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband Cable Modem Cable Modem Router External Remote Camera...

  • Page 23: Buttons Used In Ip Installer

    BUTTONS USED IN IP INSTALLER Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Alias This function is not currently implemented. Displays either ...

  • Page 24: Static Ip Setup

    Exits the IP Installer program.  For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www. samsungipolis.com). STATIC IP SETUP Manual Network Setup Run ...
  • Page 25 3. In the
    pane, provide the necessary information. • MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually.  You can configure the static IP settings only if the DHCP checkbox is unchecked.

  • Page 26: Ip Address : 192.168.Xxx.100

    network connection and setup If using a Broadband Router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The of the Broadband Router will be the ...

  • Page 27: Auto Network Setup

    Auto Network Setup Run to display the camera search list. At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.  For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.

  • Page 28: Dynamic Ip Setup

    network connection and setup DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN Checking the Dynamic IP 1.

  • Page 29: Port Range Forward (Port Mapping) Setup

    PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1.
  • Page 30 network connection and setup Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. ...

  • Page 31: Connecting To The Camera From A Shared Local Pc

    CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. ...

  • Page 32: Web Viewer

    web viewer CONNECTING TO THE CAMERA Normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. •...

  • Page 33: Login

    IP when you try to access the device. To add the IP address to the server, visit www.samsungipolis.com and register your device, and set the DDNS option to before providing the host name for the DDNS server.

  • Page 34: Installing Activex

    web viewer INSTALLING ACTIVEX If connecting to a camera for the first time, you will see the installation message. Then, install the required ActiveX to access the camera and control the video from it in real time. 1. When accessing the start screen of the monitoring page, click the yellow warning message in the top of the page.

  • Page 35: Installing Silverlight Runtime

    INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. 1. Click . 2. When the file download dialog pops up, click .
  • Page 36 web viewer 5. When done, click . 6. Close and restart the web browser, and try to access the Web Viewer. When Silverlight Runtime is properly installed, you will see the Live screen.  For normal installation, set the Block Popup setting as follows: ex) Internet Explorer ...

  • Page 37: Using The Live Screen

    USING THE LIVE SCREEN Item Description Monitoring Move to the monitoring screen. Playback Switch to the monitoring screen that plays recording data in the SD memory. Setup Move to the Setup screen. Viewer Screen Displays the Live video on the screen. Alarm Output Activate the Alarm Out port.

  • Page 38: To Capture The Snapshot

    web viewer Item Description Digital zoom You can use the mouse wheel to activate the digital zooming. Screen Adjust the screen to the optimal size, and display the Full Screen icon on the Live Optimization, screen. Full Screen Capture Saves the snapshot as an image file in the .bmp format. You can select a profile type in
  • Page 39 To toggle the audio sound 1. Click the [Audio ( )] button. The corresponding button will be displayed in the Viewer. 2. Click the button to listen to / mute the sound as you wish. This button operates as a toggle button.

  • Page 40: Playback

    web viewer PLAYBACK 1. Click the [Playback ( )] button. 2. Specify the start time and end time of your search. 3. Select a search type. 4. Click the [Search ( )] button. The search results will be displayed in the list.
  • Page 41 To check time information of the playing video 1. Click the [About ( )] button. 2. Date and time information appears on the screen. To back up the searched video 1. Click [ ] on the scene to back up. Save as window appears.

  • Page 42: Setup Screen

    setup screen SETUP You can configure the audio & video, network, event and system settings of the camera via the network. 1. In the Live screen, click [Setup ( 2. The Setup screen appears. AUDIO & VIDEO SETUP Video profile 1.

  • Page 43: To Add A Video Profile

    To add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. 1. Select a profile number. 2. Provide the name and select a codec. 3.

  • Page 44: Video Setup

    setup screen What is GOP size? GOP(Group of Pictures) is a set of video frames for H.264 compression, indicating a collection of frames from the initial I-Frame (key frame) to the next I-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame. I-Frame is the basic frame for the compression, also known as Key Frame, which contains one complete image data.

  • Page 45: Audio Setup

    4. Specify the privacy zone. • Rectangle: Place the cursor at a point in the video and drag it to whatever you need. You can specify up to 16 zones. • Quadrilateral: Select 4 vertices (forming a quadrilateral) on the video. You can specify up to 1 zone.
  • Page 46 SSDR (Samsung Super Dynamic Range) Setup In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness. 1. Select . 2. Set to .
  • Page 47 BLC Setup You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select . 2. Set to . 3. Set . You can change the level to adjust the brightness of the monitoring area.
  • Page 48 setup screen WDR Setup It displays a sharp image of the objects in a scene where both bright and dark areas exist. 1. Select . 2. Set to . 3. Specify the .  WDR is available only if ...
  • Page 49 • Sens-up mode : Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sharp image.  If you set the shutter mode to Manual/A.FLK, SENS-UP mode will be deactivated. ...
  • Page 50 setup screen OSD Setup 1. Select . 2. Select each item and set it properly. • Camera title : Use alphanumeric characters in the list and enter a desired title in the bottom input line.  You can enter up to 15 characters for the title. •...
  • Page 51 Smart codec setup Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area. 1. From the Setup menu, select the

  • Page 52: Focus Setup

    setup screen Focus setup You can adjust the Zoom magnification and Focus of the video. 1. Select the

  • Page 53: Network Setup

    NETWORK SETUP Interface 1. From the Setup menu, select the tab. 2. Click . 3. Set the and as necessary. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
  • Page 54 The default is 80(TCP). • VNP port : Set a port used to transfer video signals with the Samsung protocols. • RTSP port : Used to transfer videos in the RTSP mode; the default is 554. • Viewer port : Used to transfer videos to the Web Viewer; the default is 4520.

  • Page 55: Registering With Ddns

    - Password : Enter the password for the DDNS service. (i.e., password that is registered with Dyndns) 5. When done, click [Apply ( Registering with DDNS To register your product with the Samsung DDNS 1. Visit the iPOLiS web site(www. samsungipolis.com) and sign in with a registered account.
  • Page 56 7. Click [REGISTRATION]. The product will be added to the product list that you can check. To connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set to . 2. Provide the that you registered product ID with the DDNS site.
  • Page 57 IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the tab. 2. Click . 3. Select . • Deny : If selecting this, access from those IPs that are added to the filtering will be restricted.
  • Page 58 setup screen Installing the certificate 1. Enter the certificate name. 2. Select the certificate file to be installed and certificate key, and click [Install ( button. Deleting the certificate 1. Click [Delete ( )] button. 2. To delete a public certificate, you should access the network video decoder in the mode of ...
  • Page 59 You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the tab. 2. Click . 3. Provide the IP address. The default prefix is 32. For DSCP, the default is set to 63.

  • Page 60: Event Setup

    setup screen • Enable SNMP v3 : SNMP version 3 will be active. - Password : Specify the default password for SNMP version 3. The default password is “admin4321”.  The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
  • Page 61 • E-mail configuration - Use SSL : Specify the use of SSL. - Server address : Enter the IP address of the email server that you use for the email transfer. - Use authentication : Select whether to use authorization. - User ID : Enter the user ID for logging into the email server.

  • Page 62: Alarm Input

    setup screen To make recording on the SD memory 1. Check the and the . 2. If the SD memory has a sufficient free space, set to . Otherwise, check the stored data and if you find them not important, then click ...
  • Page 63 4. Specify the . • Always : Always check if an alarm occurs. It activates in operated mode when the alarm occurs.  If set to Always, the activation time cannot be changed. • Only scheduled time : Check if an alarm occurs at a specified day of the week for a specified time period.
  • Page 64 setup screen ❖ Intelligent Video Analysis (VA) 1. Select an Intelligent Video Analysis mode. 2. Set whether to use the Intelligent Video Analysis function. 3. Select a type. • Line/Area/Scene Change : An event will be tripped if an object passes through the line, area or full screen that you specified or if there occurs an entering/exiting or scene change.
  • Page 65 7. Select whether to mark the corresponding region on motion detection. - Select to mark a box on the detected moving object on the screen. Objects are marked in colors, as green for non-event objects, red for line/area event ob- jects, and blue for appearing/disappearing event objects.
  • Page 66 setup screen ❖ Line / Area / Scene Change To set the minimum object size 1. Set to . 2. Set the type to . 3. Set the event rule to . 4. Drag and drop to a desired point of the video.
  • Page 67 To set virtual line based rule 1. Set to . 2. Set the type to .  The virtual line based rules can be specified only if the intelligence video analysis type is set to . 3.
  • Page 68 setup screen 5. Select a desired . • Entering : This event rule detects an event of object’s center entering into the defined area from outside through the boundary of the area. • Exiting : This event rule detects an event of object’s center exits from the inside of the defined area through the boundary of the area.
  • Page 69 ❖ Appearing/Disappearing To set the minimum object size 1. Set to . 2. Set the type to . 3. Set the event rule to . 4. Drag and drop to a desired point of the video.
  • Page 70 setup screen To set defined area based rule 1. Set to . 2. Set the type to . 3. Set the event rule to . 4. Click a corner point of a desired area in the video to display the popup window.

  • Page 71: Time Schedule

    Time schedule You can configure so that an event will occur at a scheduled time regardless of the actual occurrence of the event. 1. From the Setup menu, select the tab. 2. Click

  • Page 72: System Setup

    setup screen SYSTEM SETUP Product information 1. From the Setup menu, select the tab. 2. Click . 3. Check the camera information, or provide details according to your network environment. • Device name : Provide a device name that will be displayed on the Live screen.
  • Page 73 • System time setup : Specify the time and date that will be applied to your system. - Manual : Specify the time manually. - Synchronize with NTP server : Sync with the time of the specified server address. - Synchronize with PC viewer : Synchronize the time with the connected PC. 4.
  • Page 74 setup screen Upgrade / Reboot 1. From the Setup menu, select the tab. 2. Click . 3. Select a desired item and set it appropriately. • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default.
  • Page 75 To save the current settings and restore the backup settings 1. Click [Backup]. The Save As dialog should appear. 2. Specify the backup path with a proper file name, and click [Save]. The backup file will be saved to the specified path in the format of “.bin”.
  • Page 76 setup screen You can check the system log or event log. 1. From the Setup menu, select the tab. 2. Click . 3. Select a log type. • Syslog : You can check the system logs where any system changes are recorded including the time information.

  • Page 77: Appendix

    appendix SPECIFICATION Items Description Imaging Device 1/2.8" 3M PS CMOS Total Pixels 2,144(H) X 1,588(V) Effective Pixels 2,096(H) X 1,561(V) Scanning System Progressive Video Color : 1 Lux (F1.2, 50IRE) Min. Illumination B/W : 0 Lux (F1.2, 50IRE, IR LED ON) S / N Ratio 50dB CVBS : 1.0 Vp-p / 75Ω...
  • Page 78 Items Description Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Digital Noise Reduction SSNRIII (2D+3D Noise Filter) (Off / On) Digital Image Stabilization Motion Detection Off / On (4 programmable zones) Privacy Masking Off / On (1ea 4 Point Polygonal + 16ea Rectangular zones)
  • Page 79 Items Description <2M Mode> * H.264 : Max 30 fps at all resolutions (When WDR ON, Max. framerate is 15 fps.) * MJPEG : 800x600 ~ 320x180 - 30 fps 1024x768 ~ 1920x1080 - 15 fps Max. Framerate <3M Mode> * H.264 : Max 20fps at all resolutions * MJPEG : 800x600 ~ 320x180 - 20 fps 1024x768 ~ 1920x1080 - 15 fps...
  • Page 80 appendix Items Description Streaming Method Unicast / Multicast Max. User Access 10 users at Unicast Mode Memory Slot SD/SDHC (4GB) ONVIF Conformance English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, Portuguese, Czech, Network Webpage Language Polish, Turkish, Rumanian, Serbian, Dutch, Croatian, Hungarian, Greek Supported OS : Windows XP / VISTA / 7, MAC OS Web Viewer...

  • Page 81: Product Overview

    PRODUCT OVERVIEW Unit : mm (inch) 388 (15.28'') 220 (8.66'') 55 (2.17") 114 (4.49") 50 (1.97") 57 (2.24") 45 (1.77") (1.06") (0.43") Ø114 (4.49") English _81...

  • Page 82: Troubleshooting

    appendix TROUBLESHOOTING PROBLEM SOLUTION Check to make sure that the camera’s Network settings are appropriate. Check to make sure that all network cables have been connected properly. I can’t access the camera from a If connected using DHCP, verify that the camera is able to acquire web browser.
  • Page 83 PROBLEM SOLUTION Check if the memory card is defective. Cannot record into the SD memory card. Check if the write protection tab of the memory card is set to “LOCK”. Check if the memory card is inserted in the proper direction. Operation of memory card that is formatted by other devices is not guaranteed with A SD memory card is inserted but this camera unit...

  • Page 84: Open Source Announcement

    For more additional information, send email to help.cctv@ 3. All advertising materials mentioning features or use of this samsung.com. software must display the following acknowledgement: This product includes software developed by the Computer Copyright (C) 2004, Kneschke, incremental Science Department at University College London.

  • Page 85: License

    LICENSE Various copyrights apply to this package, listed in various NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT separate parts below. Please make sure that you read all the OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF parts. THE POSSIBILITY OF SUCH DAMAGE.
  • Page 86  Neither the name of Cisco, Inc, Beijing University of THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY Posts and Telecommunications, nor the names of their EXPRESS OR IMPLIED WARRANTIES, INCLUDING, contributors may be used to endorse or promote products BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF derived from this software without specific prior written MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 87 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of Apple Inc. (“Apple”) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

  • Page 88: Gpl/Lgpl Software License

    Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to [email protected] If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 89 b) You must cause any work that you distribute or publish, If distribution of executable or object code is made by that in whole or in part contains or is derived from offering access to copy from a designated place, then the Program or any part thereof, to be licensed as a offering equivalent access to copy the source code from the whole at no charge to all third parties under the terms...

  • Page 90: End Of Terms And Conditions

    9. The Free Software Foundation may publish revised and/ one line to give the program’s name and an idea of what it or new versions of the General Public License from time does. to time. Such new versions will be similar in spirit to the Copyright (C)yyyy name of author present version, but may differ in detail to address new problems or concerns.
  • Page 91 We, the Free Software Foundation, use the GNU General called a “modified version” of the earlier work or a work “based Public License for most of our software; it applies also to any on” the earlier work. other work released this way by its authors. A “covered work”...
  • Page 92 the stated conditions are met. This License explicitly affirms d) If the work has interactive user interfaces, each must your unlimited permission to run the unmodified Program. display Appropriate Legal Notices; however, if the Program The output from running a covered work is covered by this has interactive interfaces that do not display Appropriate License only if the output, given its content, constitutes a Legal Notices, your work need not make them do so.
  • Page 93 doubtful cases shall be resolved in favor of coverage. For c) Prohibiting misrepresentation of the origin of that material, a particular product received by a particular user, “normally or requiring that modified versions of such material be used” refers to a typical or common use of that class of marked in reasonable ways as different from the original product, regardless of the status of the particular user or of version;...
  • Page 94 10. Automatic Licensing of Downstream Recipients. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring Each time you convey a covered work, the recipient conveyance of, a covered work, and grant a patent license automatically receives a license from the original licensors, to to some of the parties receiving the covered work authorizing run, modify and propagate that work, subject to this License.

  • Page 95: Gnu Lesser General Public License

    If the Program specifies that a proxy can decide which future This license, the Lesser General Public License, applies versions of the GNU General Public License can be used, to some specially designated software packages-typically that proxy’s public statement of acceptance of a version libraries-of the Free Software Foundation and other authors permanently authorizes you to choose that version for the who decide to use it.
  • Page 96 For example, on rare occasions, there may be a special need You may charge a fee for the physical act of transferring a to encourage the widest possible use of a certain library, so copy, and you may at your option offer warranty protection in that it becomes a de-facto standard.
  • Page 97 If distribution of object code is made by offering access to copy c) Accompany the work with a written offer, valid for at least from a designated place, then offering equivalent access to copy three years, to give the same user the materials specified the source code from the same place satisfies the requirement in Subsection 6a, above, for a charge no more than the to distribute the source code, even though third parties are not...
  • Page 98 by court order, agreement or otherwise) that contradict NOT LIMITED TO, THE IMPLIED WARRANTIES OF the conditions of this License, they do not excuse MERCHANTABILITY AND FITNESS FOR A PARTICULAR you from the conditions of this License. If you cannot PURPOSE.

  • Page 99: Openssl License

    OpenSSL LICENSE documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with Copyright (c) 1998-2006 The OpenSSL Project. All rights or without modification, are permitted provided that the reserved. Redistribution and use in source and binary forms, following conditions are met: with or without modification, are permitted provided that the 1.
  • Page 100 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 102 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

This manual is also suitable for:

Sno-1080rSnb-7000

Table of Contents