Related Manuals for Haier HWM25
Summary of Contents for Haier HWM25
- Page 1 Mini Washing Machine User's manual This manual is for HWM25 Please read this manual carefully before using. Retain it for future reference. 0030805835D...
-
Page 2: Table Of Contents
Contents Names of the parts Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Select the wash time Finish washing Disposal after washing Trouble-shooting Packing list *Specification... -
Page 3: Names Of The Parts
Names of the parts Timer knob Water inlet Lint filter(Installed by user) Panel support Pulsator Cabinet Base frame Fixing leg (four pieces) Meaning and description of the symbols Contents marked with that symbol are related Warning sign to the safety of the product and the personal safety of the users. -
Page 4: Safety Precautions
Safety precautions Please insert the power cord into special receptacle with rated vol- tage. Be sure to use single-phase three pins receptacle. The earthing terminal of the receptacle must be earthed reliably. If possible, please adopt electric leakage protector. If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. - Page 5 Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine.
-
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose When washing, the drain hose must be hung up, if you want to drain, please refer to the below mention. -
Page 7: Install The Water Inlet Hose ; Select The Water Level
Adjust the installation position The largest permitted slope of the bearing surface of the washing machine is 2 . Slanting or uneven ground will cause unstable operation of the machine. Please check with following methods: Hang a becket with weight to confirm if the washing machine is horizontal. Install the water inlet hose ;... -
Page 8: Preparation Before Washing
Preparation before washing Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Hang the drain hose up. -
Page 9: The Musts In Washing
The musts in washing The capacity of washing of the machine refers to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. -
Page 10: Finish Washing
Finish washing The pulsator stops rotating. Put down the drain hose to discharge the water. Disposal after washing After using, please clean the lint and foreign materials of the lint filter and lint frame in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. -
Page 11: Trouble-Shooting
Trouble-shooting The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. Phenomena The washing machine does not act There's abnormal sound inside the machine. The drainage does not work. How to check Is there power failure? Is the power plug inserted tightly? Is the machine slanting? Is there metal item inside the tub? -
Page 12: Packing List
Packing list Name User's manual Water inlet hose Lint filter Mini washing machine Specification Water level/Water quantity (about) Injection pressure(MPa) Quantity One piece One piece One piece One set 1/7L 2/12L 3/18L 0.02 0.2...