Table of Contents
Space Saving 120 Volt
Portable Compact Electronic
Top Load Washer
French
Spanish
Welcome to the world of
Haier Compact Portable Laundry!
• Efficient, Compact and Portable
• Easy Installation and Use
• Uses Convenient Standard120VAC -15 amp Outlets
• You can install them anywhere!
Guide de l'Utilisateur
Manual del Usuario Modelo
Quality
Innovation
ß
User Manual
HLP021-WM
HLP021-WM
HLP021-WM
Style
ß
Table of Contents
Related Manuals for Haier HLP021-WM
Summary of Contents for Haier HLP021-WM
- Page 1 Portable Compact Electronic Top Load Washer French Spanish Welcome to the world of Haier Compact Portable Laundry! • Efficient, Compact and Portable • Easy Installation and Use • Uses Convenient Standard120VAC -15 amp Outlets • You can install them anywhere! User Manual Guide de l’Utilisateur...
-
Page 2: Unpacking Your Washing Machine
They are on a label in back of the washer. Staple your receipt to your manual. You will need it to obtain warranty service. Please register your product online at www.prodregister.com/haier DANGER become trapped inside. Model number Serial number... - Page 3 IMPORTANT SAFETY WARNING INSTRUCTIONS Warning – To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. Use this appliance only for its intended purpose as described in this use and care guide.
-
Page 4: Save These Instructions
SAVE THESE INSTRUCTIONS HOUEHOLD USE ONLY Tools and Materials Required You will need to use the following tools when installing your washer: 1. Phillips Screwdriver - For bottom plate. 2. Open End Plyers - To secure fintake hose. 3. Tape Measure - Check measurement of washer location. -
Page 5: Safety Instructions
safety instructions Electrical Requirements Grounding Instructions This appliance must be grounded. It is equipped with a 3-wire cord having a grounded plug. The plug must be plugged into an outlet which is properly installed and grounded. Warning! Improper use of the grounded wire can result in the risk of electric shock. -
Page 6: Table Of Contents
English table of contents PAGE SAFETY INSTRUCTIONS ...1-2 PARTS AND FEATURES ...4-5 OPERATING YOUR WASHER ...6-11 UNPACKING AND ACCESSORIES INVENTORY ... 12 PROPER LOCATION ... 13 INSTALLATION INSTRUCTIONS ... 14-16 UNIT DIMENSIONS ... 17 ELECTRICAL CONNECTIONS... 18 PROPER CARE AND CLEANING ... 19 TROUBLESHOOTING GUIDE ... -
Page 7: Unpacking And Checking Parts
Unpacking 1. Remove all packing materials. This includes the foam base and all adhesive tape holding the washer accessories inside and outside. Slide out and remove bottom Styrofoam that is used to protect the washer from shipping damage due to vibrations and shock. -
Page 8: Parts And Features
English washer parts and features Front View 1. Top Lid 2. Control Panel 3. Washer Cabinet 4. Front Leveling Leg (or for Caster) Back View Water Inlet Fitting Water Absorption Cushion Water Level Selector 10. Power Cord Holder Clip 5. Cabinet Handle (located on both sides of the washer) 6. -
Page 9: Control Panel
3. Start/Pause Button With Power "ON" Press the "Start/Pause" button to start washing cycle, pause operation, or resume operation. 4. Power ON/OFF Button Press in the "Power On/Off" button to turn on the power of the washer. HLP021-WM STATUS CYCLE... - Page 10 5. Make sure the lint fi lter is in place, it is installed on the side of the drum. 6. Ensure nothing but clothing is in the washer, then plug power cord into a 15 AMP 110-120 VOLT, 60 HZ GROUNDED OUTLET ONLY.
-
Page 11: Proper Location
• Select a suitable location for the washer on a hard even surface away from direct sunlight and heat sources (e.g., radiators, baseboard heaters, cooking appliances, etc.). • Verify the compact washer’s measurement with the location you have selected and make sure the washer will fit. - Page 12 The bottom panel blocks noises to provide you with the quietest performance possible during the wash cycle operation. 1. First, lay down the washer on its front side. 2. Place the panel against the bottom of the machine. Align the holes in the panel with the holes in the washer.
-
Page 13: Leveling The Washer
Once the foot is at the right height, then lock that position using the outer and larger ring of the fixed foot. This should be done for all feet of the washer. -
Page 14: Installing Your Washer
4. Attach the faucet connector to the water inlet hose and make sure that the rubber washer is placed in between. 5. Attach the other end of the water inlet hose to the washer water inlet and make sure that the rubber washer is placed in between. - Page 15 7. Make sure the lint filter is installed. The lint filter must be installed before the washer is used. The lint filter is packaged with the User Manual. 8. Plug in the washer to a regular 115 Volt / 60 Hz, 15 Amps outlet, only after all water and drain lines are connected .
- Page 16 HLP021-WM CYCLE Power ON/OFF: (1) • Press the POWER button once to turn ON the power to the washer. Press it again to turn the power OFF. Start/Pause: (2) • Press this button once to start the wash process. Press this button once again to pause the activity during the wash cycle.
-
Page 17: Loading The Washer
OFF the machine and then restarting to make the new selection. Note: If the washer is turned ON without any water in the tub, it will start to spin after a few minutes. The pulsator will not rotate unless the water is filled to a selected level. -
Page 18: Wash Program
English Selecting the Wash Cycle When you first turn on the POWER, the washer will automactically be set for the NORMAL wash cycle, for Wash, Rinse & Spin. The LED indicators with be lit, to show cycle program. Power ON Wash, Rinse &... - Page 19 Approximate Wash Times Wash Program Soak Times (approx minutes) NORMAL Wash Wash, Rinse None & Spin Heavy Wash Twice Wash, Wash, Rinse & Spin Quick Wash Quick, Wash, None Rinse & Spin Note: • The total wash times will vary depending on cycle. •...
- Page 20 End-of-Cycle Signal The machine will beep at the end of the cycle, indicating that the washing is complete. The “Wash/Rinse/Spin” indicator lights will still be ON. The washer will turn OFF automatically in approximately 10 minutes after the completion of the cycle.
-
Page 21: Proper Use Of Detergent
Dilute the bleach and add it to the water before putting clothes into the washtub. Warning! Be careful not to spill undiluted bleach onto the washer cabinet or onto clothing. It is a strong chemical that may damage your clothes and the finish of the washer if not properly diluted. -
Page 22: Proper Care And Cleaning
• Disconnect the electrical plug. • Dry the inner washtub. If moving the washer, disconnect the drain hose. • To prevent mold and mildew, leave the door open so that the moisture inside the machine can evaporate. -
Page 23: Normal Operating Sounds
Normal Operating Sounds The following sounds are normally heard during the operation of the washer: • Tumbling sounds can be heard as heavy wet clothes in the washer are tossed around continuously. • Air rushing noise is the result of the washtub spinning at a very high RPM. -
Page 24: Troubleshooting Guide
48 seconds later. • The pulsator pauses during incoming water flow in the wash and rinse cycle. This is normal. This prevents splashing during water inlet. • The washer may need to be reloaded and the clothes may need to be rebalanced. - Page 25 • Coins, loose change, buttons or other heavy objects may be making the noise. • A squeaking sound may be due to an overloaded wash tub. • Vibration noises are due to an improper leveling of the washer or an uneven distribution of clothing in the tub.
- Page 26 Spinning will start in a few minutes. • During the final spinning, it stops, the “Rinse” indicator lights up and the washer starts to fill with water – The wash load is slanting on one side. After the water is filled, the slanting will be removed and the spinning will be reactivated.
-
Page 27: Warranty
Limited Warranty After one year from the original retail purchase date, Haier will provide a part at no cost, as indicated below, to replace said part as a result of a defect in materials or workmanship. Haier is solely responsible for the cost of the part. - Page 28 Ne pas renvoyer cet appareil au magasin. Si vous avez un problème avec cet appareil, veuillez contacter le service à la clientèle de Haier au 1-877-337-3639. IL EST OBLIGATOIRE DE FOURNIR UNE PREUVE D’ACHAT DATÉE, LE NUMÉRO DU MODÈLE ET SON NUMÉRO DE SÉRIE AFIN DE BÉNÉFICIER DE LA COUVERTURE DE LA GARANTIE.