Bosch SGE63E05UC/32 Installation Instructions Manual page 10
Hide thumbs
Also See for SGE63E05UC/32:
- Operating instructions manual (67 pages) ,
- Installation instructions manual (37 pages)
Available languages
Available languages
For a large port, use the drain hose as it is.
1.
For a small port, insert the rubber drain hose adaptor
into the drain hose end.
2.
Obtain the Rubber Drain Hose Adaptor (J) spring clamp
from the Dishwasher Installation Kit (do not substitute}.
3.
Insert the dishwasher
drain hose into the end of the
drain hose (see Figure 15). Be sure to fully insert the
drain hose.
4.
Use the clamp provided to attach the Rubber Drain Hose
Adaptor to the house plumbing as shown in Figure 16.
Figure 15
Top Mount is used for countertops made of wood or other
materials that can be easily drilled. Orient the mounting
brackets as shown in Figure 17, and position the two small
tabs on the mounting brackets over the two slots on the dish-
washer's front corners. Push the mounting brackets down
firmly to insert the tabs into the slots.
Top Mount
Figure 17
Figure 16
Side Mount is used for countertops made of marble, granite,
or other very hard materials that cannot be easily drilled. Bend
the mounting brackets along the small holes and in the same
direction as the two small tabs. Orient the mounting brackets
as shown in Figure 18, and position the two small tabs on
the mounting brackets over the two slots on the dishwasher's
front corners. Push the mounting brackets down firmly to
insert the tabs into the slots.
Side Mount
Figure 18
Alternate
Side Mount for opening 235/8" (600mm).
Insert
a side mount force distributor (M) in each side as shown in
Figure 19.
Before installing
the supplied countertop
mounting
brackets,
decide which method
of securing
the
dishwasher into its enclosure will be used. Once the
mounting brackets are installed on the dishwasher,
removing
them is difficult
and will damage
the
mounting brackets and the dishwasher.
The dishwasher can be secured into its enclosure in 3 ways:
NOTE: If your dishwasher opening width measures >23%"
(600ram) use the TOP or SIDE MOUNT mounting methods.
If your dishwasher opening width measures 23%" (600ram)
use the ALTERNATE
SIDE MOUNT mounting method.
Figure 19
Alternate Side Mount
10
