Table of Contents
DIGITAL VIDEO RECORDER
DIGITAL VIDEO RECORDER
6
GB
Alarm Record Setup
The following illustrates the intial setting of the
To set whether to start recording or not when alarm
go off. If you want to start recording when alarming,
set it
, if not set it
. If you exit the menu after
setting ON for ALARM ENABLE, system starts
recording whenever alarm go off. To stop the
recording started by alarm intentionally, push the
button.
Set to
(Normally Close) when the alarm input is Active High, and set to
Open) when the alarm input is Active Low.
Set to
to have the system activate the Buzzer when a motion is deteced in the input
video or when alarm occurs, or set to
It determines the time of alarm recording from 10 second (OFF) to 5 minutes when the system
detects any movement or alarm in the input image.
If you set it to
, alarm recording will be implemented during the alarm-generating
signal is in active state.
It sets the main alarm recording field rate. In case of NTSC as the input image signal, up to
30 FPS can be recorded and in case of PAL, up to 25 FPS can be recorded.
But, in case of recording after setting
record 15.00 FPS max for NTSC and 12.50 FPS max for PAL.
1) NTSC
2) PAL
3-15
menu.
ALARM RECORD SETUP
ALARM ENABLE
OFF
ALARM DETECT TYPE
NC
ALARM BUZZER
OFF
ALARM TIME
10 sec
ALARM PICTURE RATE
30.00FPS
❷
:MOVE
:SELECT MENU:EXIT
(Normally
to keep the Buzzer inactive.
to
, you could
7
Reservation Record Setup
The following illustrates the intial setting of the
Reservation Recording function is a function
which enables recording automatically when you
are not at home, you could set the system to
implement recording at desired day of the week,
desired time duration. At first, locating cursor to
the timer column with
and set it to
then select desired day of the week at DAY
column, after that input recording start time and
end time to start and end column respectively.
If you set
to
Reservation
Recording set up items will be applied to designated day only, If you set ALL, Reservation
Recording set up items will be applied to all day of the week. And, if you set M~F,
Reservation Recording set up items will be applied just to Monday through Friday.
If you setup the RESERVE RECORDING and escape from the MENU, the
indicating RESERVE RECORDING was successfully reserved will pop up. Then the
will pop up at the reserved time while recording begins. To stop recording intentionally,
push the STOP/ENTER(
) button. Thus, the recording is stopped. Available numbers
of Reservation Recording are up to by 24.
Reservation Recording, at that time of Reservation Recording start.
GB
menu.
TIMER RECORD SETUP
TIMER
DAY
START
END
01
OFF
OFF
--:--
--:--
02
OFF
OFF
--:--
--:--
03
OFF
OFF
--:--
--:--
04
OFF
OFF
--:--
--:--
05
OFF
OFF
--:--
--:--
06
OFF
OFF
--:--
--:--
,
❷➛❿
:MOVE
:SELECT MENU:EXIT
icon
icon
determines
of
3-16
Table of Contents
