ZyXEL Communications GS1900 Series User Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Switch
  5. GS1900 Series
  6. User manual

ZyXEL Communications GS1900 Series User Manual

Gs1900 series gbe smart managed switch
Hide thumbs Also See for GS1900 Series:
Table of Contents

Quick Links

See also: User Manual
GS1900 Series
GbE Smart Managed Switch
Version 1.0
Edition 1, 07/2013
Quick Start Guide
User's Guide
Default Login Details
IP Address
http://192.168.1.1 (In-band
User Name
www.zyxel.com
Password
ports)
admin
1234
Copyright © 2013 ZyXEL Communications Corporation
Table of Contents
loading

Related Manuals for ZyXEL Communications GS1900 Series

Summary of Contents for ZyXEL Communications GS1900 Series

  • Page 1 GS1900 Series GbE Smart Managed Switch Version 1.0 Edition 1, 07/2013 Quick Start Guide User’s Guide Default Login Details IP Address http://192.168.1.1 (In-band ports) User Name admin www.zyxel.com Password 1234 Copyright © 2013 ZyXEL Communications Corporation...
  • Page 2 Note: It is recommended you use the Web Configurator to configure the Switch. • Web Configurator Online Help Click the help icon in any screen for help in configuring that screen and supplementary information. GS1900 Series User’s Guide...

  • Page 3: Table Of Contents

    Configuration: Link Aggregation ......................123 Configuration: Loop Guard ........................130 Configuration: Mirror ..........................133 Configuration: Multicast .........................135 Configuration: Spanning Tree .......................143 Configuration: LLDP ..........................153 Configuration: QoS ..........................166 Configuration: Security ..........................175 Configuration: AAA ..........................184 Configuration: Management ........................190 Maintenance ............................208 Troubleshooting ............................219 GS1900 Series User’s Guide...

  • Page 4: Table Of Contents

    3.1.1 Ethernet Ports ..........................25 3.2 Rear Panel ............................25 3.2.1 Power Connection ........................26 3.3 LEDs .............................27 Chapter 4 The Web Configurator ........................28 4.1 Overview ............................28 4.2 Access ...............................28 4.3 Navigating the Web Configurator ......................29 4.3.1 Title Bar ...........................29 GS1900 Series User’s Guide...
  • Page 5 7.4.1 Bandwidth Control ........................56 7.5 Storm Control ............................57 Chapter 8 Monitor: VLAN.............................58 8.1 Overview ............................58 8.1.1 What You Can Do in this Chapter ....................58 8.2 VLAN ..............................58 8.2.1 VLAN ............................58 8.2.2 Port ............................59 8.2.3 VLAN Port ..........................60 GS1900 Series User’s Guide...
  • Page 6 13.1.1 What You Can Do in this Chapter ..................75 13.2 Spanning Tree ..........................75 13.2.1 CIST ............................75 13.2.2 CIST Port ..........................76 13.2.3 MST ............................77 13.2.4 MST Port ..........................78 13.2.5 STP Statistics ........................79 Chapter 14 Monitor: LLDP .............................81 GS1900 Series User’s Guide...
  • Page 7 17.4 Information ............................93 17.4.1 The System Information Screen ...................94 Chapter 18 Configuration: Port..........................95 18.1 Overview ............................95 18.1.1 What You Can Do in this Chapter ..................95 18.2 Port ..............................95 18.2.1 The Port Edit Screen ......................96 18.3 EEE ..............................97 GS1900 Series User’s Guide...
  • Page 8 20.2.1 The Static MAC Screen ....................... 119 20.2.2 The Static MAC Add Screen ....................120 20.2.3 The Filtering MAC Screen ....................120 20.2.4 The Filtering MAC Add Screen ...................121 20.2.5 The Dynamic Age Screen ....................121 Chapter 21 Configuration: Link Aggregation ....................123 GS1900 Series User’s Guide...
  • Page 9 24.2.5 The Add/Edit Router Port Screen ..................138 24.2.6 The Profile Screen .......................139 24.2.7 The Add/Edit Profile Screen ....................140 24.2.8 The Throttling Screen ......................141 24.2.9 The Add/Edit Throttling Screen ...................141 Chapter 25 Configuration: Spanning Tree ......................143 25.1 Overview ............................143 25.2 Spanning Tree ..........................143 GS1900 Series User’s Guide...
  • Page 10 27.2.5 The DSCP Mapping Screen ....................170 27.2.6 The IP Precedence Mapping Screen ...................171 27.3 Trust Mode ............................172 27.3.1 The Global Screen .......................172 27.3.2 The Port Screen ........................172 27.3.3 The Trust Mode Edit Screen ....................173 Chapter 28 Configuration: Security........................175 28.1 Overview ............................175 GS1900 Series User’s Guide...
  • Page 11 30.2.3 The Local Add/Modify Screen ....................191 30.2.4 The Remote Screen ......................192 30.2.5 The Remote Add/Modify Screen ..................192 30.3 SNMP ............................193 30.3.1 The Global Screen .......................193 30.3.2 The Community Screen .......................194 30.3.3 The Community Add/Modify Screen ...................195 30.3.4 The Group Screen .......................195 GS1900 Series User’s Guide...
  • Page 12 31.5.1 Overview ..........................213 31.6 Reset to Factory Defaults ......................214 31.6.1 Overview ..........................214 31.6.2 Reset the Switch to Factory Defaults ...................214 31.7 Network Diagnostics ........................214 31.7.1 Port Test ..........................214 31.7.2 IPv4 Ping Test ........................215 31.7.3 IPv6 Ping Test ........................216 GS1900 Series User’s Guide...
  • Page 13 31.8 Reboot ............................218 31.8.1 Overview ..........................218 31.8.2 Reboot the Switch .......................218 Chapter 32 Troubleshooting..........................219 32.1 Power, Hardware Connections, and LEDs ..................219 32.2 Switch Access and Login ......................220 32.3 Switch Configuration ........................222 Appendix A Legal Information......................223 Index ..............................225 GS1900 Series User’s Guide...

  • Page 14: User's Guide

    User’s Guide...

  • Page 16: Getting To Know Your Switch

    Getting to Know Your Switch This chapter introduces the main features and applications of the Switch. 1.1 Introduction The GS1900 series is a new generation Gigabit Ethernet (GbE) Web-Managed Switch. This User’s Guide covers the following models: Table 1 GS1900 Series Comparison Table...

  • Page 17: Gigabit Ethernet To The Desktop

    In this example, all computers can share high-speed applications on the server and access the Internet. To expand the network, simply add more networking devices such as switches, routers, computers, print servers and so on. Figure 2 Gigabit to the Desktop Internet GS1900 Series User’s Guide...

  • Page 18: Ieee 802.1Q Vlan Application Example

    • ICMPv6 to report errors encountered in packet processing and perform diagnostic functions, such as "PING” • IPv4/IPv6 dual stack; the Switch can run IPv4 and IPv6 at the same time • DHCPv6 client • Multicast Listener Discovery (MLD) snooping GS1900 Series User’s Guide...

  • Page 19: Ways To Manage The Switch

    Switch to its factory default settings. If you backed up an earlier configuration file, you would not have to totally re-configure the Switch. You could simply restore your last configuration. GS1900 Series User’s Guide...

  • Page 20: Hardware Installation And Connection

    Note: Do NOT block the ventilation holes. Leave space between devices when stacking. Note: For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front and 3.4 inches (8 cm) at the back of the Switch. This is especially important for enclosed rack installations. GS1900 Series User’s Guide...

  • Page 21: Hardware Installation

    Chapter 2 Hardware Installation and Connection 2.2 Hardware Installation See the following table for a comparison of the hardware installation methods of each GS1900 model: Table 2 GS1900 Series Installation Comparison Table DESKTOP MODEL GS1900-8 GS1900-8HP GS1900-16 GS1900-24E Wall-mounting Rack-mounting Power ON/OFF Switch Note: Ask an authorized technician to attach the Switch to the rack/wall.

  • Page 22: Rack Mounting

    Attaching the Mounting Brackets to the Switch Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket with the screw holes on the side of the Switch. GS1900 Series User’s Guide...

  • Page 23: Mounting The Switch On A Rack

    Figure 6 Mounting the Switch on a Rack (GS1900-16 and GS1900-24E) Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes into the rack. Repeat steps to attach the second mounting bracket on the other side of the rack. GS1900 Series User’s Guide...

  • Page 24: Hardware Overview

    3.1 Front Panel Connections The following figures show the front panels of the Switch. Figure 7 Front Panel: GS1900-8 Figure 8 Front Panel: GS1900-8HP Figure 9 Front Panel: GS1900-16 Figure 10 Front Panel: GS1900-24E GS1900 Series User’s Guide...

  • Page 25: Ethernet Ports

    • Speed: Auto • Duplex: Auto • Flow control: Off 3.2 Rear Panel The following figures show the rear panels of the Switch. Figure 11 Rear Panel: GS1900-8 Figure 12 Rear Panel: GS1900-8HP Figure 13 Rear Panel: GS1900-16 GS1900 Series User’s Guide...

  • Page 26: Power Connection

    Connect the other end of the cord to a power outlet. Disconnecting the Power The power input connectors can be disconnected from the power source individually. Disconnect the power cord from the power outlet. Disconnect the power cord from the AC power socket. GS1900 Series User’s Guide...

  • Page 27: Leds

    The system is transmitting/receiving to/from a 1000 Mbps Ethernet network. The link to a 1000 Mbps Ethernet network is up. The link to an Ethernet network is down. Green Power is supplied to all PoE Ethernet ports. There is no power supply. (GS1900-8HP only) GS1900 Series User’s Guide...

  • Page 28: The Web Configurator

    4.2 Access Make sure your Switch hardware is properly connected. See the Quick Start Guide. Browse to https://192.168.1.1. The Login screen appears. Figure 15 The Login Screen Enter the user name (default: “admin”) and password (default: “1234”). GS1900 Series User’s Guide...

  • Page 29: Navigating The Web Configurator

    Click this to apply your changes to the Switch’s run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. GS1900 Series User’s Guide...

  • Page 30: Navigation Panel

    Figure 17 Web Configurator: Logout Screen 4.3.2 Navigation Panel Use the menu items on the navigation panel to open screens to configure Switch features. The following sections introduce the Switch’s navigation panel menus and their screens. Figure 18 Navigation Panel GS1900 Series User’s Guide...

  • Page 31: Monitor Menu

    This link takes you to a screen where you can view protection against network loops that occur on the edge of your network. Multicast This link takes you to screen where you can view various multicast features, IGMP snooping and create multicast VLANs. GS1900 Series User’s Guide...

  • Page 32: Configuration Menu

    Port This link takes you to screens where you can configure speed, flow control and priority settings for individual Switch ports. Port Configure port settings for individual Switch ports. Configure EEE settings for individual Switch ports. GS1900 Series User’s Guide...
  • Page 33 Router Port Configure router port settings. Profile Configure profile settings. Throttling Configure throttling settings. Spanning Tree This link takes you to screens where you can configure the RSTP/ MRSTP/MSTP to prevent network loops. Global Configure global settings. GS1900 Series User’s Guide...
  • Page 34 Access-Control System Plus). Auth Method Configure auth method settings. RADIUS Configure RADIUS settings. TACACS+ Configure TACACS+ settings. Management Configure syslog, SNMP, error disable, HTTP/HTTPS, users and remote access control. Syslog Global Configure global settings. Local Configure local settings. GS1900 Series User’s Guide...

  • Page 35: Maintenance Menu

    This link takes you to screens where you can view system logs and can test port(s). Port Test Cable Diag Manage cable diag and test results. PING IPv4 Manage ping test settings. IPv6 Manage IPv6 ping test settings. Trace Manage trace route settings. Reboot Reset the system. GS1900 Series User’s Guide...

  • Page 36: Getting Start

    Virtual Device Displays an image of the Switch. Wizard Displays the following links: Start up, VLAN, QoS, and link aggregation. Device Information System Name This field displays the name used to identify the Switch on any network. GS1900 Series User’s Guide...

  • Page 37: Wizard

    In order to set up your IP/DNS, please do the following. Click Getting Start > Start up > 1 Step 1 Set up IP/DNS to access this screen. Figure 20 Getting Start > Start up > 1 Step 1 Set up IP/DNS GS1900 Series User’s Guide...
  • Page 38 The default username is admin and associated default password is 1234. Password The default username is admin and associated default password is 1234. Previous Click Previous to show the previous screen. Next Click Next to show the next screen. After clicking Next, the finish screen appears. GS1900 Series User’s Guide...
  • Page 39 In VLAN, you can create VLAN, tag VLAN setting, and view finished results. In order to create VLAN, please do the following. Click Getting Start > VLAN > 1 Step 1 Create VLAN to access this screen. GS1900 Series User’s Guide...
  • Page 40 Select from the drop-box a VLAN ID. Next Click Next to show the next screen. After clicking Next, the tag VLAN setting screen appears. Figure 24 Getting Start > VLAN > 2 Step 2 Tag VLAN Setting GS1900 Series User’s Guide...
  • Page 41 Ports belonging to the specified VLAN don't tag all outgoing frames transmitted. Previous Click Previous to show the previous screen. Finish Review the information and click Finish to create the task. In QoS, you can create QoS settings, and view finished results. GS1900 Series User’s Guide...
  • Page 42 Click and drag icons located on the left to desired preference. Click and drag icons located on the left to desired preference. Next Click Next to show the next screen. After clicking Next, the finish screen appears. GS1900 Series User’s Guide...
  • Page 43 In link aggregation, you can link aggregation and view finished results. In order to create link aggregation settings, please do the following. Click Getting Start > Link aggregation > 1 Step 1 Link aggregation to access this screen. GS1900 Series User’s Guide...
  • Page 44 Click and drag icons located on the left to desired preference. Group 8 Click and drag icons located on the left to desired preference. Next Click Next to show the next screen. After clicking Next, the finish screen appears. GS1900 Series User’s Guide...
  • Page 45 Displays summary results. Group 6 Displays summary results. Group 7 Displays summary results. Group 8 Displays summary results. Previous Click Previous to show the previous screen. Finish Review the information and click Finish to create the task. GS1900 Series User’s Guide...

  • Page 46: Technical Reference

    Technical Reference The appendices provide general information. Some details may not apply to your Switch.

  • Page 48: Monitor: System

    The factory default subnet mask is 255.255.255.0. 6.2.1 IPv4 Use this screen to view the Switch’s IPv4 information. Click Monitor > System > IP > IPv4 to open this screen. Figure 30 Monitor > System > IP > IPv4 GS1900 Series User’s Guide...

  • Page 49: Ipv6

    This field displays IP address of the Switch in the IP domain. IPv6 Gateway This field displays the IP address of the default outgoing gateway. DHCPv6 Client This field displays the Switch’s DHCP settings when it is acting as a DHCPv6 client. GS1900 Series User’s Guide...

  • Page 50: Information

    This field displays the descriptive name of the Switch for identification purposes. System Location This field displays the geographic location of the Switch for identification purposes. System Contact This field displays the person in charge of the Switch for identification purposes. GS1900 Series User’s Guide...

  • Page 51: Monitor: Port

    Figure 33 Monitor > Port > Port > Status Each field is described in the following table. Table 23 Monitor > Port > Port > Status LABEL DESCRIPTION Port This is the port index number. Port Name A descriptive name that identifies this port. GS1900 Series User’s Guide...

  • Page 52: Port Counters

    Figure 34 Monitor > Port > Port > Port Counters Each field is described in the following table. Table 24 Monitor > Port > Port > Port Counters LABEL DESCRIPTION Interface Port This field displays the port. GS1900 Series User’s Guide...
  • Page 53 This field displays the etherStatsFragments. etherStatsJabbers This field displays the etherStatsJabbers. etherStatsCollisions This field displays the etherStatsCollisions. etherStatsPkts64Octets This field displays the etherStatsPkts64Octets. etherStatsPkts65to127Octets This field displays the etherStatsPkts65to127Octets. etherStatsPkts128to255Octets This field displays the etherStatsPkts128to255Octets. GS1900 Series User’s Guide...

  • Page 54: Bandwidth Utilization

    This field displays the link down. Refresh period This field displays the refresh period. This field displays the IFG. Transmitted (Tx) traffic during the last time interval in seconds. Received (Rx) traffic during thetime interval in seconds. GS1900 Series User’s Guide...

  • Page 55: Poe

    This field displays the total power the Switch can provide to the connected PoE-enabled devices on the PoE ports. Consuming This field displays the total amount of power the Switch is currently supplying to the Power(W) connected PoE-enabled devices. GS1900 Series User’s Guide...

  • Page 56: Bandwidth Management

    This field specifies the current egress burst size in bytes all ports. Burst Port Rate View the maximum bandwidth allowed in kilobits per second (Kbps) for the traffic flow on a port. Port This field displays the port number. GS1900 Series User’s Guide...

  • Page 57: Storm Control

    Displays how many unknown unicast packets the port receives (in pps). Unicast (pps) Action Displays the action the device takes when a limit is reached. The following options are available: • Drop - drop the packet. • Shutdown - shutdown the connection. GS1900 Series User’s Guide...

  • Page 58: Monitor: Vlan

    62) displays the global and port settings of the Switch. 8.2 VLAN Use this screen to view Switch VLAN settings. 8.2.1 VLAN Use this screen to view the Switch’s VLAN settings. Click Monitor > VLAN > VLAN > VLAN to access this screen. GS1900 Series User’s Guide...

  • Page 59: Port

    This is the port VLAN identification number. A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so that the frames are forwarded to the VLAN group that the tag defines. GS1900 Series User’s Guide...

  • Page 60: Vlan Port

    Figure 42 Monitor > VLAN > VLAN > VLAN Port Each field is described in the following table. Table 31 Monitor > VLAN > VLAN > VLAN Port LABEL DESCRIPTION VLAN Port VLAN ID This is the VLAN identification number. GS1900 Series User’s Guide...

  • Page 61: Guest Vlan

    Figure 43 Guest VLAN Example VLAN 100 VLAN 102 Internet Use this screen to view the Switch’s guest VLAN. Click Monitor > VLAN > Guest VLAN to access this screen. Figure 44 Monitor > VLAN > Guest VLAN GS1900 Series User’s Guide...

  • Page 62: Voice Vlan

    This is the voice VLAN identification number. Cos/802.1p This displays the packet’s 802.1p priority field. Remark Cos/802.1p This field displays the state of the cos/802.1p. Aging Time (30-65536 min) Displays the time interval (from 30 to 65536) in minutes. Port GS1900 Series User’s Guide...
  • Page 63 Chapter 8 Monitor: VLAN Table 33 Monitor > VLAN > Voice VLAN (continued) LABEL DESCRIPTION Port This field displays a port number. State This field displays the state of a port. GS1900 Series User’s Guide...

  • Page 64: Monitor: Mac Table

    Figure 46 MAC Table Flowchart This link takes you to a screen where you can view the MAC address and VLAN ID of a device attach to a port. You can also view what kind of MAC address it is. GS1900 Series User’s Guide...

  • Page 65: What You Can Do In This Chapter

    This shows whether the MAC address is dynamic (learned by the Switch) or static (manually entered in the Static MAC Forwarding screen). Port This is the port from which the above MAC address was learned. Total Entries Displays the number of total entries. GS1900 Series User’s Guide...

  • Page 66: Monitor: Link Aggregation

    66) displays link aggregation status. 10.2 Link Aggregation Use the Link Aggregation screens to view Switch link aggregation status. Click Monitor > Link Aggregation > LAG to access this screen. Figure 48 Monitor > Link Aggregation > LAG GS1900 Series User’s Guide...
  • Page 67 Link Status This field displays the status of the link. Active Member Displays if this member is an active member of a trunk. Standby Member Displays if this member is an standby member of a trunk. GS1900 Series User’s Guide...

  • Page 68: Monitor: Loop Guard

    B. Since switch B is in loop state, the probe packet P returns to port N on A. The Switch then shuts down port N to ensure that the rest of the network is not affected by the switch in loop state. GS1900 Series User’s Guide...

  • Page 69: What You Can Do In This Chapter

    • The Loop Guard screen (Section 11.2 on page 69) displays loop guard status. 11.2 Loop Guard Use the Loop Guard screen to view Switch loop guard status. Click Monitor > Loop Guard to access this screen. GS1900 Series User’s Guide...
  • Page 70 DESCRIPTION Loop Guard Status Port This field displays a port number. Status This field displays the status. Time Left (sec) This field displays the amount of time left in seconds. Action This field displays the action. GS1900 Series User’s Guide...

  • Page 71: Monitor: Multicast

    Use this screen to view Switch various multicast features. 12.2.1 Vlan Use this screen to view the Switch’s IGMP vlan. Click Monitor > Multicast > IGMP > Vlan to access this screen. Figure 53 Monitor > Multicast > IGMP > Vlan GS1900 Series User’s Guide...

  • Page 72: Statistics

    This field displays the number of total entries. 12.2.2 Statistics Use this screen to view the Switch’s IGMP statistics. Click Monitor > Multicast > IGMP > Statistics to access this screen. Figure 54 Monitor > Multicast > IGMP > Statistics GS1900 Series User’s Guide...

  • Page 73: Group

    Figure 55 Monitor > Multicast > IGMP > Statistics > Reset 12.2.3 Group Use this screen to view the Switch’s IGMP group. Click Monitor > Multicast > IGMP > Group to access this screen. GS1900 Series User’s Guide...

  • Page 74: Router

    This field displays the dynamic router ports. Static Router Ports This field displays the static router ports. Forbidden Router Ports This field displays the forbidden router ports. Total Entries This field displays the number of total entries. GS1900 Series User’s Guide...

  • Page 75: Monitor: Spanning Tree

    Use this screen to view Switch spanning tree settings. 13.2.1 CIST Use this screen to view the Switch’s spanning tree CIST instance. Click Monitor > Spanning Tree > CIST to access this screen. Figure 58 Monitor > Spanning Tree > CIST GS1900 Series User’s Guide...

  • Page 76: Cist Port

    13.2.2 CIST Port Use this screen to view the Switch’s spanning tree CIST port status. Click Monitor > Spanning Tree > CIST Port to access this screen. Figure 59 Monitor > Spanning Tree > CIST Port GS1900 Series User’s Guide...

  • Page 77: Mst

    This field displays the state of the port. 13.2.3 MST Use this screen to view the Switch’s spanning tree MST instance. Click Monitor > Spanning Tree > MST to access this screen. Figure 60 Monitor > Spanning Tree > MST GS1900 Series User’s Guide...

  • Page 78: Mst Port

    Select a number from the drop-down menu to display results. Port This field displays the port number. MSTI ID A VLAN can be mapped to a specific Multiple Spanning Tree Instance (MSTI). MSTI allows multiple VLANs to use the same spanning tree. GS1900 Series User’s Guide...

  • Page 79: Stp Statistics

    Note: In this user’s guide, “STP” refers to both STP and RSTP. Use this screen to view the Switch’s spanning tree STP statistics. Click Monitor > Spanning Tree > STP Statistics to access this screen. Figure 62 Monitor > Spanning Tree > STP Statistics GS1900 Series User’s Guide...
  • Page 80 This field displays the Multiple Spanning Tree Protocol (MSTP) BDPUs received. Received Configuration This field displays the configuration BDPUs transmitted. BDPUs Transmitted TCN BDPUs This field displays the TCN BDPUs transmitted. Transmitted MSTP BDPUs This field displays the Multiple Spanning Tree Protocol (MSTP) BDPUs transmitted. Transmitted GS1900 Series User’s Guide...

  • Page 81: Monitor: Lldp

    14.2.1 Statistics Use this screen to view the Switch’s LLDP global and port statistics. Click Monitor > LLDP > Statistics to access this screen. Figure 63 Monitor > LLDP > Statistics GS1900 Series User’s Guide...

  • Page 82: Remote Information

    This field displays the port ID subtype. Port ID This field displays the port ID. System Name This field displays the descriptive name of the Switch for identification purposes. Time to Live This field displays the live time of this entry. GS1900 Series User’s Guide...

  • Page 83: Overloading

    Optional TLVs This field displays how many bytes used by optional TLVs. MED Inventory This field displays how many bytes used by MED inventory. 802.1 TLVs This field displays how many bytes used by 802.1 TLVs. GS1900 Series User’s Guide...

  • Page 84: Monitor: Security

    When total MAC address entry is 8k, static MAC can't be configured. Use this screen to view Switch port security settings. Click Monitor > Security > Port Security to access this screen. Figure 66 Monitor > Security > Port Security GS1900 Series User’s Guide...

  • Page 85: Port

    Each field is described in the following table. Table 50 Monitor > Security > 802.1x > Port LABEL DESCRIPTION Port This label shows the port you are viewing. Status This field displays status of the port. GS1900 Series User’s Guide...

  • Page 86: Authenticated Hosts

    This label shows the port you are viewing. Session Time This label shows the session time. Authentication This label shows the authentication method. Method MAC Address This field displays the source MAC address in the binding. GS1900 Series User’s Guide...

  • Page 87: Monitor: Management

    (Section 16.3 on page 88) displays global and port. 16.2 Syslog Use this screen to view Switch syslog management. Click Monitor > Management > Syslog to access this screen. Figure 69 Monitor > Management > Syslog GS1900 Series User’s Guide...

  • Page 88: Error Disable

    This link takes you to a screen where you can view CPU protection and error disable recovery. Use this screen to view Switch global and port error disable management. Click Monitor > Management > Error Disable to access this screen. GS1900 Series User’s Guide...
  • Page 89 This field displays the supported features that allow the Switch to shut down a port or Reason discard packets on a port according to the feature requirements and what action you configure. Time Left (sec) This field displays the time left in seconds. Action This field displays the action. GS1900 Series User’s Guide...

  • Page 90: Configuration: System

    17.2.1 The IPv4 Screen Use this screen to view the IPv4 interface status and Switch’s management IPv4 addresses. Click Configuration > System > IP > IPv4 to open this screen. Figure 71 Configuration > System > IP > IPv4 GS1900 Series User’s Guide...

  • Page 91: The Ipv6 Screen

    Select Enable to allow the device to act as a DHCPv6 client or Disable to disallow it. This field displays the Switch’s DHCP settings when it is acting as a DHCPv6 client. Auto Select Enable to allow the device to auto-configure the IPv6 properties or Disable to Configuration manually enter the properties. GS1900 Series User’s Guide...

  • Page 92: Time

    Select the system date and time values from the dropdown lists. Time Zone Select the time zone from the dropdown list. Daylight Saving Select Enable to use Daylight Saving Time to offset the system time or Disable not adjust Time system time. GS1900 Series User’s Guide...

  • Page 93: The Sntp Server Screen

    Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. 17.4 Information The information option is used to set the following system information properties: system name, system location, and system contact information. GS1900 Series User’s Guide...

  • Page 94: The System Information Screen

    Enter the geographic location of the Switch for identification purposes. System Contact Enter the person in charge of the Switch for identification purposes. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 95: Configuration: Port

    18.2 Port Use this screen to view Switch port settings and select ports for configuration. Click Configuration > Port > Port > Port to open this screen. Figure 76 Configuration > Port > Port > Port GS1900 Series User’s Guide...

  • Page 96: The Port Edit Screen

    18.2.1 The Port Edit Screen Use this screen to configure Switch port settings. Click Configuration > Port > Port > Edit to open this screen. Figure 77 Configuration > Port > Port > Edit GS1900 Series User’s Guide...

  • Page 97: Eee

    Use this screen to view Switch port Energy-Efficient Ethernet (EEE) settings and select ports for configuration. Click Configuration > Port > EEE > EEE to open this screen. Figure 78 Configuration > Port > EEE > EEE GS1900 Series User’s Guide...

  • Page 98: The Eee Edit Screen

    Ethernet ports, and each device that receives power through an Ethernet port is a Powered Device (PD). Use this screen to view Switch port Power over Ethernet (PoE) settings and select ports for configuration. Click Configuration > Port > PoE > PoE to open this screen. GS1900 Series User’s Guide...
  • Page 99 Class 3 - Optional, 6.49 to 12.95 • Class 4 - Reserved (PSEs classify as Class 0) in a switch that supports IEEE 802.3af only. Optional, 12.95 to 25.50 in a switch that supports IEEE 802.3at. GS1900 Series User’s Guide...

  • Page 100: The Poe Edit Screen

    Displays the list of port index numbers that are being configured. PD State Select Enable to provide power to a PD connected to the port or Disable so the port cannot receive power from the Switch. GS1900 Series User’s Guide...
  • Page 101 Select Low to set the Switch to assign the remaining power to the port after all critical and high priority ports are served. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 102: Bandwidth Management

    Specify the current egress burst size in bytes for all ports. Burst Port Rate Edit Select this check box to configure the properties of a port. Click the Edit button change the properties of the port. GS1900 Series User’s Guide...

  • Page 103: The Port Rate Edit Screen

    Select Enable to activate egress peak rate limits on the port(s). Egress Enter the maximum bandwidth allowed in kilobits per second (Kbps) for the outgoing traffic Bandwidth flow on a port. (Kbps) Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 104: Storm Control

    Displays how many unicast packets the port receives per second. Unicast (pps) Action Displays the action the device takes when a limit is reached. The following options are available: • Drop - drop the packet. • Shutdown - shutdown the connection. GS1900 Series User’s Guide...

  • Page 105: The Port Edit Screen

    Click the Enable checkbox to active the feature. Unicast (pps) Enter the maximum number of unicast packets the port can receive per second. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 106: Configuration: Vlan

    The Guest VLAN screen (Section 19.3 on page 112) displays the global and port settings of the Switch. • The Voice VLAN screen (Section 19.4 on page 114) displays the global, OUI, and port settings of the Switch. GS1900 Series User’s Guide...

  • Page 107: Vlan

    19.2.2 The VLAN Add Screen Use this screen to add a VLAN. Click Configuration > VLAN > VLAN > VLAN > Add to open this screen. Figure 87 Configuration > VLAN > VLAN > VLAN > Add GS1900 Series User’s Guide...

  • Page 108: The Port Screen

    19.2.3 The Port Screen Use this screen to view port settings and select VLANs for configuration. Click Configuration > VLAN > VLAN > Port to open this screen. Figure 88 Configuration > VLAN > VLAN > Port GS1900 Series User’s Guide...

  • Page 109: The Port Edit Screen

    Table 72 Configuration > VLAN > VLAN > Port > Edit LABEL DESCRIPTION Port Port Select Displays the list of port index numbers that are being configured. PVID Enter a number between 1 and 4094 as the port VLAN ID. GS1900 Series User’s Guide...

  • Page 110: The Vlan Port Screen

    Port-based VLANs are specific only to the Switch on which they were created. Use this screen to view VLAN port settings. Click Configuration > VLAN > VLAN > VLAN Port to open this screen. GS1900 Series User’s Guide...
  • Page 111 Select Tagged to set the port TX tag status to tagged in the VLAN. Select Untagged to set the port TX tag status to untagged in the VLAN. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 112: Guest Vlan

    Figure 92 Configuration > VLAN > Guest VLAN > Global The following table describes the labels in this screen. Table 74 Configuration > VLAN > Guest VLAN > Global LABEL DESCRIPTION Global State Select to enable the global Guest VLAN feature. GS1900 Series User’s Guide...

  • Page 113: The Port Screen

    Display the state of the selected port. 19.3.3 The Port Edit Screen Use this screen to configure the guest VLAN port EEE settings. Click Configuration > VLAN > Guest VLAN > Port > Edit to open this screen. GS1900 Series User’s Guide...

  • Page 114: Voice Vlan

    Use this screen to view and configure voice VLAN settings. 19.4.1 The Global Screen Use this screen to configure the global Voice VLAN settings. Click Configuration > VLAN > Voice VLAN > Global to open this screen. GS1900 Series User’s Guide...

  • Page 115: The Oui Screen

    Use this screen to view the OUI settings. The maximum number of entries is 16. Modifying the OUI table will restart auto detection of OUI process. Click Configuration > VLAN > Voice VLAN > OUI to open this screen. GS1900 Series User’s Guide...

  • Page 116: The Oui Add/Edit Screen

    19.4.3 The OUI Add/Edit Screen Use this screen to add/edit an OUI address. Click Configuration > VLAN > Voice VLAN > OUI > Add/Edit to open this screen. Figure 97 Configuration > VLAN > Voice VLAN > OUI > Add/Edit GS1900 Series User’s Guide...

  • Page 117: The Port Screen

    The following table describes the labels in this screen. Table 80 Configuration > VLAN > Voice VLAN > Port LABEL DESCRIPTION Port Edit Select this check box to configure the properties of a port. Click the Edit button change the properties of the port. GS1900 Series User’s Guide...

  • Page 118: The Port Edit Screen

    MAC addresses in the Voice VLAN will be blocked for 10 seconds. Possible port modes are: • Enabled: Enable Voice VLAN security mode operation. • Disabled: Disable Voice VLAN security mode operation. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 119: Configuration: Mac Table

    LABEL DESCRIPTION Static MAC Click Add to create a new Static MAC entry. MAC Address Displays the object MAC address from which this incoming frame came. VLAN Displays the VLAN group to which this frame belongs. GS1900 Series User’s Guide...

  • Page 120: The Static Mac Add Screen

    Click Cancel to discard the changes. 20.2.3 The Filtering MAC Screen Use this screen to view Filtering MAC addresses. Click Configuration > MAC Table > Filtering MAC to open this screen. Figure 102 Configuration > MAC Table > Filtering MAC GS1900 Series User’s Guide...

  • Page 121: The Filtering Mac Add Screen

    Use this screen to enter the Dynamic MAC Age. The dynamic MAC age is how long all dynamically learned MAC addresses remain in the MAC address table before they age out (and must be relearned). Click Configuration > MAC Table > Dynamic Age to open this screen. GS1900 Series User’s Guide...
  • Page 122 Dynamic MAC Age Aging Time Enter the aging time of the MAC address. The value can be between 10 and 630 seconds. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 123: Configuration: Link Aggregation

    This ensures increased network stability and control over the trunk groups on your Switch. 21.2.1 The Global Screen Use this screen to configure global Link Aggregation settings. Click Configuration > Link Aggregation > Global to open this screen. GS1900 Series User’s Guide...

  • Page 124: The Lag Management Screen

    Click Cancel to discard the changes. 21.2.2 The LAG Management Screen Use this screen to view LAG management settings. Click Configuration > Link Aggregation > LAG Management to open this screen. Figure 106 Configuration > Link Aggregation > LAG Management GS1900 Series User’s Guide...

  • Page 125: The Lag Add Screen

    21.2.3 The LAG Add Screen Use this screen to add a LAG. Click Configuration > Link Aggregation > LAG Management > Add to open this screen. Figure 107 Configuration > Link Aggregation > LAG Management > Add GS1900 Series User’s Guide...

  • Page 126: The Lag Port Screen

    100M, 10M, 100M, or 1000M. Duplex Displays the duplex value as Full, Half, or Auto. FlowCtrl State Displays whether flow control is Enable/Disable. FlowCtrl Status Displays whether flow control is in use (Enable) or not (Disable). GS1900 Series User’s Guide...

  • Page 127: The Lag Port Edit Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 21.2.6 The LACP Port Screen Use this screen to view LACP Port settings. Click Configuration > Link Aggregation > LACP Port to open this screen. GS1900 Series User’s Guide...

  • Page 128: The Lacp Port Edit Screen

    21.2.7 The LACP Port Edit Screen Use this screen to edit a LACP Port. Click Configuration > Link Aggregation > LACP Port > Edit to open this screen. Figure 111 Configuration > Link Aggregation > LACP Port > Edit GS1900 Series User’s Guide...
  • Page 129 Enter a value for the port priority. The number can be between 1 and 65,535. Timer Select a timer value of either 1 second or 30 seconds. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 130: Configuration: Loop Guard

    Figure 112 Configuration > Loop Guard The following table describes the labels in this screen. Table 94 Configuration > Loop Guard LABEL DESCRIPTION Global State Select Enable to activate loop protection on this switch. GS1900 Series User’s Guide...

  • Page 131: The Loop Guard Port

    Displays the action to take by the Switch. The options are Log, Shutdown Port, and Shutdown and Log. 22.2.3 The Port Edit Screen Use this screen to configure a Loop Guard port. Click Configuration > Loop Guard > Port > Edit to open this screen. GS1900 Series User’s Guide...
  • Page 132 Displays the list of port index numbers to be configured. State Select Enable to use the Admin Enabled feature. Action Select the action to take by the Switch. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 133: Configuration: Mirror

    The Switch supports local port mirroring. 23.2.1 The Mirror Screen Use this screen to configure Mirroring. Click Configuration > Mirror to open this screen. Figure 115 Configuration > Mirror GS1900 Series User’s Guide...
  • Page 134 Click > to move a severity type to the acting box from the available box. < Click < to move a severity type from the acting box to the available box. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 135: Configuration: Multicast

    The following table describes the labels in this screen. Table 98 Configuration > Multicast > IGMP LABEL DESCRIPTION IGMP Global Snooping Status Select Enable to turn on IGMP packet snooping or Disable to turn snooping off. GS1900 Series User’s Guide...

  • Page 136: The Vlan Screen

    Last Member Query Count Displays the number of queries. Interval (sec) Displays the amount of time (in milliseconds) between the IGMP group-specific queries sent by an upstream port when an IGMP Done message is received. Querier GS1900 Series User’s Guide...

  • Page 137: The Edit Igmp Screen

    The value can be between 30 and 18000. Max. Response Enter the amount of time (in seconds) the router connected to the upstream port waits for Interval (sec) a response to an IGMP general query message. GS1900 Series User’s Guide...

  • Page 138: The Router Port Screen

    Click Delete to remove the entry. 24.2.5 The Add/Edit Router Port Screen Use this screen to configure the Router Port settings. Click Configuration > Multicast > IGMP > Router Port > Add/Modify to open this screen. GS1900 Series User’s Guide...

  • Page 139: The Profile Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 24.2.6 The Profile Screen Use this screen to view the IGMP Profile settings. Click Configuration > Multicast > IGMP > Profile to open this screen. GS1900 Series User’s Guide...

  • Page 140: The Add/Edit Profile Screen

    Figure 122 Configuration > Multicast > IGMP > Profile > Add/Modify The following table describes the labels in this screen. Table 104 Configuration > Multicast > IGMP > Profile > Add/Modify LABEL DESCRIPTION IGMP Profile Profile No. Enter the Profile No. GS1900 Series User’s Guide...

  • Page 141: The Throttling Screen

    Filter Profile ID Displays the throttling filter profile ID. 24.2.9 The Add/Edit Throttling Screen Use this screen to configure the Throttling settings. Click Configuration > Multicast > IGMP > Throttling > Add/Edit to open this screen. GS1900 Series User’s Guide...
  • Page 142 Select the action taken by the groups to be Deny or Replace. Number Action Filter Profile ID Select the throttling filter profile ID from the dropdown list. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 143: Configuration: Spanning Tree

    It allows a Switch to interact with other (R)STP-compliant switches in your network to ensure that only one path exists between any two stations on the network. 25.2.1 The Global Screen Use this screen to view the Global settings. Click Configuration > Spanning Tree to open this screen. GS1900 Series User’s Guide...

  • Page 144: The Stp Port Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 25.2.2 The STP Port Screen Use this screen to view the STP Port settings. Click Configuration > Spanning Tree > STP Port to open this screen. GS1900 Series User’s Guide...

  • Page 145: The Stp Port Edit Screen

    Displays the P2P MAC status as Yes or No. 25.2.3 The STP Port Edit Screen Use this screen to configure the STP Port Edit settings. Click Configuration > Spanning Tree > STP Port > Edit to open this screen. GS1900 Series User’s Guide...

  • Page 146: The Cist Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 25.2.4 The CIST Screen Use this screen to view the CIST settings. Click Configuration > Spanning Tree > CIST to open this screen. GS1900 Series User’s Guide...
  • Page 147 This is the time interval in seconds between BPDU (Bridge Protocol Data Units) configuration message generations by the root switch. The allowed range is 1 to 10 seconds. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 148: The Cist Port Screen

    Displays the internal path cost. Cost 25.2.6 The CIST Port Edit Screen Use this screen to configure the CIST Port Edit settings. Click Configuration > Spanning Tree > CIST Port > Edit to open this screen. GS1900 Series User’s Guide...

  • Page 149: The Mst Screen

    Table 113 Configuration > Spanning Tree > MST LABEL DESCRIPTION MST Instance Click Add to create a new MST Instance entry. MSTI Displays the Multiple Spanning Tree Instance(s) (MSTI). VLAN List Display a list of MSTI VLANs. GS1900 Series User’s Guide...

  • Page 150: The Add/Modify Mst Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 25.2.9 The MST Port Screen Use this screen to view the MST Port settings. Click Configuration > Spanning Tree > MST Port to open this screen. GS1900 Series User’s Guide...

  • Page 151: The Mst Port Edit Screen

    Displays the internal path cost. Cost 25.2.10 The MST Port Edit Screen Use this screen to configure the MST Port Edit settings. Click Configuration > Spanning Tree > MST Port > Edit to open this screen. GS1900 Series User’s Guide...
  • Page 152 0 and 255 and the default value is 128. Internal Path Enter the internal path cost. Enter 0 for Auto. Cost (0=Auto) Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 153: Configuration: Lldp

    Figure 135 Configuration > LLDP > Global The following table describes the labels in this screen. Table 117 Configuration > LLDP > Global LABEL DESCRIPTION Global State Select Enable to activate the global LLDP. GS1900 Series User’s Guide...

  • Page 154: The Port Screen

    Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. 26.2.2 The Port Screen Use this screen to view the Port settings. Click Configuration > LLDP > Port to open this screen. GS1900 Series User’s Guide...

  • Page 155: The Port Edit Screen

    MFS - 802.3 Maximum Frame Size • MA - Management Address 26.2.3 The Port Edit Screen Use this screen to configure the Port Edit settings. Click Configuration > LLDP > Port > Edit to open this screen. GS1900 Series User’s Guide...

  • Page 156: The Local Information Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 26.2.4 The Local Information Screen Use this screen to view the Local Information settings. Click Configuration > LLDP > Local Information to open this screen. GS1900 Series User’s Guide...
  • Page 157 Displays the chassis ID subtype. Subtype Chassis ID The Chassis ID is the identification of the neighbor's LLDP frames. System Name System Name is the name advertised by the neighbor unit. System Displays the System Description. Description GS1900 Series User’s Guide...

  • Page 158: The Local Information Edit Screen

    ELIN to be used for emergency calling. 26.2.5 The Local Information Edit Screen Use this screen to configure the Port Edit settings. Click Configuration > LLDP > Local Information > Edit to open this screen. GS1900 Series User’s Guide...
  • Page 159 The following table describes the labels in this screen. Table 121 Configuration > LLDP > Local Information > Edit LABEL DESCRIPTION MED Port Location Port List Displays the index number of the LLDP port(s). The value is made of 16 pairs of hexadecimal characters. GS1900 Series User’s Guide...
  • Page 160 Room no.: Room number - Example: 450F. • Place type: Place type - Example: Office. • Postal community name: Postal community name - Example: Leonia. • P.O. Box: Post office box (P.O. BOX) - Example: 12345. GS1900 Series User’s Guide...

  • Page 161: The Med Network Policy Screen

    Click Delete to remove the entry. 26.2.7 The MED Network Policy Add/Edit Screen Use this screen to configure the Port Edit settings. Click Configuration > LLDP > MED Network Policy > Add/Edit to open this screen. GS1900 Series User’s Guide...
  • Page 162 TCP with buffering would not be an intended use of this application type. 8. Video Signalling - for use in network topologies that require a separate pol- icy for the video signalling than for the video media. GS1900 Series User’s Guide...

  • Page 163: The Med Port Screen

    Select this check box to configure the properties of a port. Click the Edit button change the properties of the port. Port Displays the MED Port value. State Displays the state of the MED port as Enable or Disable. Network Policy Displays the Network Policy value. GS1900 Series User’s Guide...

  • Page 164: The Med Port Add/Edit Screen

    Select one or more of the MED Optional TLVs: TLVs • Network Policy • Location • PoE PSE • Inventory MED Network Select one or more of the MED Network Policies in Available and move them to Acting Policy to activate. GS1900 Series User’s Guide...
  • Page 165 Chapter 26 Configuration: LLDP Table 125 Configuration > LLDP > MED Port > Edit (continued) LABEL DESCRIPTION Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 166: Configuration: Qos

    27.2.1 The Port Screen Use this screen to view the Port settings. Click Configuration > QoS > General to open this screen. Figure 144 Configuration > QoS > General GS1900 Series User’s Guide...

  • Page 167: The Port Edit Screen

    Select Enable to activate CoS Remark. DSCP Remark Select Enable to activate DSCP Remark. IP Precedence Select Enable to activate IP Precedence Remark. Remark Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 168: The Queue Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 27.2.4 The CoS Mapping Screen Use this screen to configure the Cos Mapping settings. Click Configuration > QoS > General > CoS Mapping to open this screen. GS1900 Series User’s Guide...
  • Page 169 Displays a listing of the Queue ID, range: 0 - 7. Class of Service (CoS) (0-7) Click the drop-down menu to map the Queue ID to a specific CoS. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 170: The Dscp Mapping Screen

    Queue ID Displays the DSCP Queue ID value. Queue to DSCP Mapping DSCP (0-63) Select the DSCP mapping value from the dropdown list. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 171: The Ip Precedence Mapping Screen

    IP Precedence to Queue Mapping IP Precedence Displays a listing of IP Precedence, range: 0 - 7. Queue ID (0-7) Click the drop-down menu to map an IP Precedence designation to a specific Queue ID (0 - GS1900 Series User’s Guide...

  • Page 172: Trust Mode

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 27.3.2 The Port Screen Use this screen to view the Port settings. Click Configuration > QoS > Trust Mode > Port to open this screen. GS1900 Series User’s Guide...

  • Page 173: The Trust Mode Edit Screen

    Displays the Trust status as Trust or Untrust. 27.3.3 The Trust Mode Edit Screen Use this screen to configure the Trust Mode settings. Click Configuration > QoS > Trust Mode > Port > Edit to open this screen. GS1900 Series User’s Guide...
  • Page 174 QoS Port Trust Edit Port List Displays the port index value(s). Mode Select the Trust Mode for the QoS port list as Trust or Untrust. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 175: Configuration: Security

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 28.2.2 The Port Screen Use this screen to view the Port settings. Click Configuration > Security > Port Security > Port to open this screen. GS1900 Series User’s Guide...

  • Page 176: The Port Edit Screen

    Action Displays the Action as Discard or Shutdown. 28.2.3 The Port Edit Screen Use this screen to configure the Port settings. Click Configuration > Security > Port Security > Port > Edit to open this screen. GS1900 Series User’s Guide...

  • Page 177: Protected Port

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 28.3 Protected Port 28.3.1 The Protected Port Screen Use this screen to view the Port settings. Click Configuration > Security > Protected Port to open this screen. GS1900 Series User’s Guide...

  • Page 178: The Protected Port Edit Screen

    Figure 157 Configuration > Security > Port Security > Port > Edit The following table describes the labels in this screen. Table 139 Configuration > Security > Port Security > Port > Edit LABEL DESCRIPTION Protected Port Port List Displays the port list index value(s). GS1900 Series User’s Guide...

  • Page 179: 179

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 28.4.2 The Port Screen Use this screen to view the Port settings. Click Configuration > Security > 802.1X > Port to open this screen. GS1900 Series User’s Guide...

  • Page 180: The Port Edit Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 28.4.3 The Port Edit Screen Use this screen to configure the Port settings. Click Configuration > Security > 802.1X > Port > Edit to open this screen. GS1900 Series User’s Guide...

  • Page 181: Dos

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 28.5 DoS 28.5.1 The Global Screen Use this screen to view the Global settings. Click Configuration > Security > DoS > Global to open this screen. GS1900 Series User’s Guide...

  • Page 182: The Port Screen

    The following table describes the labels in this screen. Table 144 Configuration > Security > DoS > Port LABEL DESCRIPTION Port Edit Select this check box to configure the properties of a port. Click the Edit button change the properties of the port. GS1900 Series User’s Guide...

  • Page 183: The Port Edit Screen

    Table 145 Configuration > Security > DoS > Port > Edit LABEL DESCRIPTION Port Port List Displays the port index value. State Select Enable to activate the port’s DoS feature. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 184: Configuration: Aaa

    Displays the authentication method name. The name can be between 1 and 31 ASCII Alphanumeric Characters. Method List Displays the list of authentication methods as being Local or Radius or TACACS+. Modify Click the Modify button to change the configuration settings for a VLAN entry. GS1900 Series User’s Guide...

  • Page 185: The Auth Method Add/Modify Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 29.3 RADIUS 29.3.1 The RADIUS Screen Use this screen to configure the RADIUS settings. Click Configuration > AAA > RADIUS to open this screen. GS1900 Series User’s Guide...

  • Page 186: The Radius Add/Modify Screen

    Click to Edit modify the entry. Modify Click Delete to delete the entry. 29.3.2 The RADIUS Add/Modify Screen Use this screen to configure the RADIUS settings. Click Configuration > AAA > RADIUS > Add/ Modify to open this screen. GS1900 Series User’s Guide...

  • Page 187: Tacacs

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 29.4 TACACS+ 29.4.1 The TACACS+ Screen Use this screen to configure the TACACS+ settings. Click Configuration > AAA > TACACS+ to open this screen. GS1900 Series User’s Guide...

  • Page 188: The Tacacs+ Add/Modify Screen

    Click Delete to delete the entry. 29.4.2 The TACACS+ Add/Modify Screen Use this screen to configure the TACACS+ settings. Click Configuration > AAA > TACACS+ > Add/Modify to open this screen. Figure 169 Configuration > AAA > TACACS+ > Add/Modify GS1900 Series User’s Guide...
  • Page 189 Enter the number of time outs for replies. The value can be between 1 and 30 seconds. Reply Priority Select the server priority as High or Low. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 190: Configuration: Management

    The following table describes the labels in this screen. Table 152 Configuration > Management > Syslog LABEL DESCRIPTION Global State Select the global logging setting to be enabled or disabled. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 191: The Local Screen

    The following table describes the labels in this screen. Table 154 Configuration > Management > Syslog > Local > Add/Modify LABEL DESCRIPTION Local Add Target Select the local storage target for logging messages. The options are Buffered or Flash. GS1900 Series User’s Guide...

  • Page 192: The Remote Screen

    Click Edit to make changes to the entry. Delete Click Delete to remove the entry. 30.2.5 The Remote Add/Modify Screen Use this screen to configure the Remote settings. Click Configuration > Management > Syslog > Remote > Add/Modify to open this screen. GS1900 Series User’s Guide...

  • Page 193: Snmp

    XGS3700 Series User’s Guide SNMP version 3. The next figure illustrates an SNMP management operation. SNMP is only available if TCP/IP is configured. 30.3.1 The Global Screen Use this screen to view the Global settings. Click Configuration > Management > SNMP to open this screen. GS1900 Series User’s Guide...

  • Page 194: The Community Screen

    1 to 20, and the allowed content is ASCII characters from 33 to 126. Access Right Displays the access mode for this entry. The possible values are Read-Only and Read- Write. Modify Edit Click Edit to make changes to the entry. Delete Click Delete to remove the entry. GS1900 Series User’s Guide...

  • Page 195: The Community Add/Modify Screen

    Figure 178 Configuration > Management > SNMP > Group The following table describes the labels in this screen. Table 160 Configuration > Management > SNMP > Group LABEL DESCRIPTION SNMPv3 Group Click Add to create a new SNMPv3 Group entry. GS1900 Series User’s Guide...

  • Page 196: The Group Add/Modify Screen

    NoAuth, NoPriv: No authentication and no privacy. • Auth, NoPriv: Authentication and no privacy. • Auth, Priv: Authentication and privacy. Access Right Select the access mode for this entry. The possible values are Read-Only and Read- Write. GS1900 Series User’s Guide...

  • Page 197: The User Screen

    Write. Action Delete Click Delete to remove the entry. 30.3.7 The User Add/Modify Screen Use this screen to configure the User settings. Click Configuration > Management > SNMP > User > Add/Modify to open this screen. GS1900 Series User’s Guide...

  • Page 198: The Trap Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 30.3.8 The Trap Screen Use this screen to configure the Trap settings. Click Configuration > Management > SNMP > Trap to open this screen. GS1900 Series User’s Guide...

  • Page 199: The Trap Destination Screen

    30.3.9 The Trap Destination Screen Use this screen to view the Trap Destination settings. Click Configuration > Management > SNMP > Trap Destination to open this screen. Figure 183 Configuration > Management > SNMP > Trap Destination GS1900 Series User’s Guide...

  • Page 200: The Trap Destination Add/Modify Screen

    Select the SNMP trap supported version. Possible versions are: • SNMP v1: Set SNMP trap supported version 1. • SNMP v2c: Set SNMP trap supported version 2c. • SNMP v3: Set SNMP trap supported version 3. GS1900 Series User’s Guide...

  • Page 201: Error Disable

    Select an option to Enable or Disable the Unknown Multicast Flood. Multicast Flood Unicast Flood Select an option to Enable or Disable the Unicast Flood. Port Security Select an option to Enable or Disable the Port Security. GS1900 Series User’s Guide...

  • Page 202: Http/Https

    Select the authentication method from the dropdown list. Method Session Timeout Enter the session timeout value. The timeout can be between 0 and 86400 minutes. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 203: The Https Screen

    Click Apply to save the changes. Cancel Click Cancel to discard the changes. 30.6 Users 30.6.1 The Users Screen Use this screen to configure the Users settings. Click Configuration > Management > Users to open this screen. GS1900 Series User’s Guide...

  • Page 204: The Users Add/Modify Screen

    Click Edit to make changes to the entry. 30.6.2 The Users Add/Modify Screen Use this screen to configure the Users settings. Click Configuration > Management > Users > Add/Modify to open this screen. Figure 189 Configuration > Management > Users > Add/Modify GS1900 Series User’s Guide...

  • Page 205: Remote Access Control

    30.7 Remote Access Control 30.7.1 The Global Screen Use this screen to configure the Global settings. Click Configuration > Management > Remote Access Control to open this screen. Figure 190 Configuration > Management > Remote Access Control GS1900 Series User’s Guide...

  • Page 206: The Profile Add/Modify Screen

    Delete Click Delete to remove the entry. 30.7.2 The Profile Add/Modify Screen Use this screen to configure the Profile settings. Click Configuration > Management > Remote Access Control > Profile > Add/Modify to open this screen. GS1900 Series User’s Guide...
  • Page 207 Select and enter the IPv4/Wildcard source. Service Select the service to use for remote access. The values are ALL, HTTP, HTTPS, or SNMP. Apply Click Apply to save the changes. Cancel Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 208: Maintenance

    Choose Backup to upload the firmware file as the backup image. Alternatively, choose Active to upload the firmware file as the active image. Browse File Browse to the path on your computer where the firmware you want to upload to be the active image is kept. GS1900 Series User’s Guide...

  • Page 209: Upgrade The Firmware From A File On Your Computer

    Switch. Active and backup firmware versions are saved as images on flash partitions. The backup image is used when the active partition has problems during boot. From the Maintenance screen, display the Firmware Management screen as shown next. Use this screen to view image information and activate an image. GS1900 Series User’s Guide...

  • Page 210: Activate The Backup Image

    Click Cancel to discard the changes. 31.3 Backup a Configuration File 31.3.1 Overview You can save various “snapshots” of your device to the server or your computer and restore them at a later date, if required. GS1900 Series User’s Guide...

  • Page 211: Back Up Configuration Or Log Files To A Server

    4. Click Apply to save a snapshot of your current configuration to the TFTP server. Click Cancel to discard the changes. 31.3.3 Back up configuration or log files to your computer Follow the steps below to backup configuration or log files to your computer. GS1900 Series User’s Guide...

  • Page 212: Restore A Configuration File

    Follow the steps below to restore the configuration from a server. 1. In Method, choose TFTP. 2. In Server IP, enter the TFTP server IP address. 3. In File Name, enter the name of the configuration file on the TFTP server. GS1900 Series User’s Guide...

  • Page 213: Restore The Configuration From A File On Your Computer

    1. In Source File, select the file to be used as a reference. 2. In Destination File, select the file to be overwritten. 3. Click Apply to restore to overwrite the destination file with the source file. Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 214: Reset To Factory Defaults

    Use the network utilities to perform diagnostics. 31.7.1 Port Test Click Maintenance > Diagnostics > Port Test in the navigation panel to open this screen. Use this screen to perform an internal loopback test on an ethernet port. GS1900 Series User’s Guide...

  • Page 215: Ipv4 Ping Test

    Enter the time in seconds between sending ping packets. The range is 1 to 5 seconds; the default is 1 second. Size Enter the individual packet size in bytes. The range is 8 to 5120 bytes; the default is 56 bytes. GS1900 Series User’s Guide...

  • Page 216: Ipv6 Ping Test

    Follow the steps to perform a ping test. 1. In IP Address, enter the IPv6 address. 2. In Count, enter the number of ping packets. 3. In Interval, enter the time interval in seconds. 4. In Size, enter the packet size in bytes GS1900 Series User’s Guide...

  • Page 217: Trace Route

    1. In IP Address, enter the IPv6 address. 2. In Hops, enter the number of hops. 3. Click Apply to perform the test. Click Cancel to discard the changes. The test results are displayed in Result. GS1900 Series User’s Guide...

  • Page 218: Reboot

    Follow the steps below to restart the Switch. 1. Click Reboot. 2. Click OK and then wait for the Switch to restart. This process takes up to two minutes and does not affect the Switch’s configuration. Click Cancel to discard the changes. GS1900 Series User’s Guide...

  • Page 219: Troubleshooting

    Turn the Switch off and on (in DC models or if the DC power supply is connected in AC/DC models). Disconnect and re-connect the power adaptor or cord to the Switch (in AC models or if the AC power supply is connected in AC/DC models). If the problem continues, contact the vendor. GS1900 Series User’s Guide...

  • Page 220: Switch Access And Login

    If this does not work, you have to reset the device to its factory defaults. See Section 31.6 on page 214. I cannot see or access the Login screen in the web configurator. Make sure you are using the correct IP address. • The default in-band IP address is 192.168.1.1. GS1900 Series User’s Guide...
  • Page 221 Pop-up Windows, JavaScripts and Java Permissions In order to use the web configurator you need to allow: • Web browser pop-up windows from your device. • JavaScripts (enabled by default). • Java permissions (enabled by default). GS1900 Series User’s Guide...

  • Page 222: Switch Configuration

    Click Save at the top right corner of the web configurator to save the configuration permanently. See also Section 4.3.1 on page 29 for more information about how to save your configuration. GS1900 Series User’s Guide...

  • Page 223: Appendix A Legal Information

    The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved.
  • Page 224 Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used electrical and electronic equipment should be treated separately. GS1900 Series User’s Guide...

  • Page 225: Index

    49, 91, 92, 96, 97, 98, 99, 100, Neighbor Discovery Protocol 103, 114 ping disclaimer domain name 49, 91, 92, 96, 97, 98, 99, 100, 103, 114 Java permissions Ethernet ports JavaScripts default settings LEDs FCC interference statement logout Firefox Web Configurator firmware GS1900 Series User’s Guide...
  • Page 226 187, 190, 193, 201, 202, 203, 205 VLAN, protocol based, See protocol based VLAN pop-up windows power module disconnecting product registration protocol based VLAN and IEEE 802.1Q tagging wall mounting isolate traffic warranty note Web Configurator GS1900 Series User’s Guide...
  • Page 227 Index access requirements supported browsers web configurator GS1900 Series User’s Guide...

This manual is also suitable for:

Gs1900-8Gs1900-8hpGs1900-16Gs1900-24e

Table of Contents