Related Manuals for HAI Omni LT
Summary of Contents for HAI Omni LT
- Page 1 Owner's Manual Document Number 21R00-1 Rev. 2.4 May, 2003...
- Page 2 Document Number 21R00-1 Rev. 2.4 May, 2003 Copyright ! ! ! ! 2000-2003 HAI All Rights Reserved www.homeauto.com...
-
Page 3: Table Of Contents
Quick Arm ................ 8 Buttons ................20 Bypassing Zones ............... 8 Temperature Control ............20 Auto-Bypass ..............8 HAI RC-Series Thermostats..........21 Restoring Zones ..............8 Programmable Energy Saver Modules (PESMs) ....22 What To Do When You Come Home ....... 9 Freeze Alarms ............24 What Happens When the Alarm is Activated .... - Page 4 Program Time Clock Conditions........46 TELEPHONE CONTROL ......31 Program Other Conditions .........46 Set Up Dial ..............47 Telephone Interface............31 Telephone Access............47 In-House Phones ............. 31 Answer Outside Call ..........47 Remote Phones..............31 Remote Commands ..........47 Rings Before Answer ..........48 Phone Access Denied - Remote Lockout ......32 Dial Type..............48 Alternate Method ............
-
Page 5: Introduction
INTRODUCTION Thank you for purchasing your new OmniLT automation system. You are about to experience a new feeling of comfort, convenience, and control. Please take a few moments to become familiar with all of the features of this fine product by reviewing this manual. Please keep this manual on file for future reference. -
Page 6: Overall Description
OVERALL DESCRIPTION Console Operation The console is designed with everything that is necessary for you to program and operate your OmniLT control and security system. Because we feel that it is very important for you to feel comfortable with the operation of your OmniLT, we recommend that you start by becoming familiar with your console. -
Page 7: Normal Top-Level Display
6- UP ARROW The Up Arrow key is used to scroll through menus and lists. The Up Arrow is used to scroll back through a list (for example, if you have already used the down arrow to scroll to an item, the Up Arrow will bring you back to a previous item). 7- CONSOLE LED The Console LED is used to indicate whether the security system is currently armed or disarmed. -
Page 8: Main Menu
When using the arrow keys to scroll through lists of units, zones, buttons, codes, and temperature zones, only the named items are displayed. If no text description has been given to an item, it will be skipped over when scrolling through that list. You can still enter any item number to access it directly, and then scroll up and down among the named items. -
Page 9: Confirmation Beep
OmniLT Maintenance Your OmniLT controller and the consoles are designed to require very little maintenance. For smoke detectors, motion detectors, and other components not manufactured by HAI and follow maintenance procedures outlined by the manufacturer. Consoles can be cleaned using a mild detergent and a soft cloth. -
Page 10: Security System Operation
SECURITY SYSTEM OPERATION Disarming the Security System and Silencing Alarms Before going any further, you should know how to disarm your security system in the event that the alarm sounds. Turning the system OFF disarms the burglar alarm, resets the fire and emergency alarms, and silences all sirens and sounders. Press the OFF key. -
Page 11: Using Shortcut Keys
2 = NIGHT The NIGHT mode is used when you are asleep and everyone in your household is at home. In the Night mode, your doors, windows, and non-sleeping area (i.e. downstairs) motion detectors are armed. In the Night mode, there is no entry delay. The alarm system sounder will be activated immediately if any door, window, or non-sleeping area (motion detector) is tripped. -
Page 12: Quick Arm
Quick Arm For extra convenience, the OmniLT can be armed by simply pressing the DAY, NIGHT, or AWAY button twice, eliminating the need to enter the code. To quick arm the system in the Away mode, from the top-level display, press AWAY AWAY The quick arm feature only works if the alarm system is in the Off mode, and if no alarms are sounding. -
Page 13: What To Do When You Come Home
What To Do When You Come Home Entry through a door: If you enter your home while the system is armed in the Day or Away modes, using your normal entry door: • Console beeper comes on - display indicates: " *** DISARM SYSTEM *** - PRESS OFF THEN CODE" •... -
Page 14: Fire Alarm Activated
Fire Alarm Activated When the fire alarm is activated by the smoke/fire detector(s), the alarm responds exactly as described under Burglar Alarm Activated, except: • The console display reads, "FIRE ALARM! ZONE NAME TRIPPED". • The sounder will activate in a 3 pulse temporal pattern to distinguish the fire alarm from the burglar alarm. •... -
Page 15: Police Emergency
Police Emergency When the 1 key and the 3 keys are pressed simultaneously, the Police Emergency alarm is activated. This alarm operates exactly the same as described for Burglar Alarm Activated except: • The console display indicates: "BURGLARY! - POLICE EMERG TRIPPED". Fire Emergency When the 4 key and the 6 key is pressed simultaneously, the Fire Emergency alarm is activated. -
Page 16: Trouble Indications
Trouble Indications The OmniLT constantly monitors the alarm zones and several internal matters and will alert you if it detects trouble. The particular trouble is indicated on the bottom line of the display and a trouble signal is given by beeping the console beeper continuously, 2 beeps per second. -
Page 17: Manager Code
Testing Your System HAI recommends testing your system on a weekly basis to ensure that you are fully protected. Notify your Central Station that you intend to test the system. To test the siren, press the 1 and 3 keys simultaneously. -
Page 18: Control
X-10, X-10 Pro, Leviton, PCS, ACT, Lightolier, and compatible modules for lights and small appliances. • HAI Communicating Thermostats for controlling Heating, Ventilation, and Air Conditioning Systems. • Programmable Energy Saver Modules (PESM) for central heating and air conditioning systems. -
Page 19: Unit Numbers
Unit Numbers Each module has its own Unit Number. Any unit number that is not being used for an ALC Switch Module may be used for an X-10 Module. ALC Switch Modules and X-10 Modules may not be assigned to the same unit number. Each ALC switch module must have a unique address. -
Page 20: Dimming And Brightening Lamps
If the House Code is configured to use the Compose Format, the second page of the menu is modified to allow Scene commands. When configured as Compose, the Level and Ramp Commands are removed from the menu. Entry Lights (Unit Name) ↑... -
Page 21: Scene Command (Compose)
The rate specifies the time it takes the switch to go from full off to full on, or from full on to full off. Thus a level change from full off to 50% on will take half the time specified. Before any digits are entered, the ' # ' key may be used to switch between specifying the rate in minutes, seconds, and hours. -
Page 22: Internal Flags
Internal Flags A Flag is an internal setting (think of it as a virtual switch – it can be turned on and off) used to conditionalize a program (based on the state of the switch), or to run macro buttons when the Flag is turned Off (0) or On (1-255). Any Flag can also be used as a counter. -
Page 23: Leviton Scene Control
Leviton Scene Control OmniLT supports Leviton Scene Control (a feature found in certain Leviton Switches. There are 16 Scenes that can be set and executed. The Leviton Switches are divided into "lighting groups" of four units each. Each of these lighting groups can be set to four different Scenes. -
Page 24: Scene Off Command
Other appliances can be controlled by temperature as well - such as a bathroom heater or a ceiling fan. The temperature menu is used to control HAI Communicating Thermostats, Programmable Energy Saver Modules, and Temperature Sensors. The status of each of these may also be displayed on the console. -
Page 25: Hai Rc-Series Thermostats
Press the ' # ' key when the desired temperature zone is shown. Press the ' 0 ' key to select all HAI Thermostats. This is a simple way to broadcast the new Heat or Cool setting or change the system mode, fan mode, or hold mode of all HAI thermostats in your system. -
Page 26: Programmable Energy Saver Modules (Pesms)
Programmable Energy Saver Modules (PESMs) The PESM is used when you are have any thermostat, other than a HAI Communicating Thermostat, and would like to control your heating and cooling system with the OmniLT system. The PESM is a temperature sensor and control relay in a small enclosure that mounts near your central heating, ventilation, and air conditioning (HVAC) system thermostat. - Page 27 The PESM provides an energy saver function. When the energy saver is on, the HVAC system is set back, meaning that the temperature is allowed to rise or fall to an energy saving level. When the energy saver is off, your thermostat operates normally. Your thermostat should be set to the desired comfort temperature.
-
Page 28: Freeze Alarms
To set a temperature setpoint, press 2 (HEAT) or 3 (COOL). For Celsius temperatures, press the ' # ' key prior to entering the temperature to make the number negative. The Celsius temperature may also be specified in 0.5 degree steps if three numeric digits are entered. The third digit adds a .5 to the first two digits if it is any- thing other than zero. -
Page 29: Temperature Control Of Appliances
Outdoor temperature zones have a High and Low temperature associated with them that can be used for control purposes. An example where the bathroom heat is turned on if the outdoor temp goes below 60 degrees is shown in the Programming section. High and Low temperatures are changed the same way as a PESM. - Page 30 DEN LAMP ↓ LAST COMMANDED You may enter a unit number to start displaying the status of that unit, or simply press the down arrow key to scroll through the list of units. The status display is as shown under Control, except that now the arrow keys may be used to continue scrolling between units.
-
Page 31: Event Log
Next, the display shows the A/D reading for the battery voltage, phone line voltage, AC power on, bell, and fuse: BAT: PHONE: 140 215 ↕ ACON: BELL: FUSE: 222 ↕ The next series of displays shows the current analog reading for each security zone input. The displays show the readings for zones 1-32. -
Page 32: Show Events
The following Events, along with the time and date of their occurrence are recorded in the Event Log when they occur: • All Security system Armings and disarmings (Off, Day, Night, Away, and Vacation), and user name. • All zones bypassed or restored by the user, and user name. •... -
Page 33: Log Message
TRASH NIGHT ↓ ENTER MESSAGE You may enter the message number followed by the ' # ' key to display that message, or simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to display the selected message: Mon Feb 21, 00 4:01 PM TRASH NIGHT... - Page 34 The built-in serial port (J5) on the controller is assigned to Serial Port 1. Serial port 2 is a Serial Interface Module connected to the Expansion port on the controller. Next, select the message to be sent. You may enter the message number followed by the ' # ' key to send that message, or simply press the down arrow key to scroll through a list of messages.
-
Page 35: Telephone Control
TELEPHONE CONTROL Telephone Interface Your OmniLT is equipped with a built-in telephone response feature that allows you to control and access the status of your system from any Touch-Tone phone. The OmniLT actually talks to you using a digital recording of an actual human voice, so the sound is incredibly life like. You send commands to the OmniLT using the keys of your Touch-Tone telephone. -
Page 36: Phone Access Denied - Remote Lockout
Phone Access Denied - Remote Lockout The OmniLT has a remote lockout feature to discourage youngsters (and adults who act that way) from trying to access your system. If four invalid codes are entered, the system will hang up and a one-hour lockout period will begin. During the lockout period, the OmniLT will not answer a call after any number of rings, which should discourage the caller. -
Page 37: Recording Your Address
When you are finished with the voice menu, press the 9 (Good-Bye) key. The OmniLT will say, "GOOD-BYE" and hang up. From an in-house phone, the dial tone will return. From a remote phone, you will hear a click as the OmniLT hangs up. It is recommended that you press 9 to terminate a remote call. -
Page 38: Emergency Dial-Out
Emergency Dial-Out Emergency dial out consists of two distinct parts: the "digital dialer" and the "voice dialer." Digital Dialer The digital dialer (also called a "digital communicator") reports alarm events to a central station monitoring center. The digital dialer sends a digitally coded message to the central station's receiver and computer. The computer in the central station presents your name, address, and other information to a human operator who notifies the appropriate authorities. -
Page 39: What You Hear - If Your Omnilt Calls You
If the number dialed is busy, or if all lines are busy, the dialer will immediately hang up and go to the next number in the Dial Order. The dialer will wait up to 45 seconds after it finishes dialing a complete phone number for a voice to answer. If it doesn't hear a voice in that time, it goes on to the next number. -
Page 40: Setup
SETUP The Setup menu is used to configure operating parameters, program your system to do its automated control and security functions, and give descriptions (names) for all of your zones, units, buttons, codes, temperatures, and messages. To enter the Setup menu, from the top-level display or from the main menu, press the 9 (SETUP) key on the console keypad. Upon entry to the Setup mode, you will first be prompted to enter a security code: SET UP ENTER CODE:... -
Page 41: Duress Code
The times and days are changed by pressing the ' # ' KEY. Choose the 1 (TIME) key to change the On or Off times. You will be prompted to enter the new time. AM/PM must be specified for the time if the AM/PM format is being used, otherwise the entered time should be 13:00-23:59. -
Page 42: Add Programs
Each automation "program" is a single step in programming automation in an OmniLT system. Each program must specify when that program should execute and an action to be taken. The program may also specify a condition that must be true for the program to execute. -
Page 43: Delete All Programs
If there are no programs for the specified item, the console will beep three times and will display: *** NO PROGRAMS *** Otherwise, a help screen is displayed: Press # to delete or ↓ edit displayed program. The first program is displayed once the down arrow is pressed. The top line displays the time or button/event that activates the program and any condition that must be true for the program to activate. -
Page 44: Edit Programs When
• Selecting 3 (&COND) allows a condition to be specified that must be true for the program to be executed at the specified time. Each of these items defaults to its current setting for an existing program that is being edited, or to a default value for a new program. -
Page 45: Button Programs
DAY(S): M-W-F-- 1-7=MON-SUN 0=ONCE Press the ' # ' key and the display will then return to the Edit Program menu: EDIT PROGRAM 1=WHEN 2=CMD 3=&COND Button Programs Selecting 2 (BUTTON) from the Edit When menu sets up a program to be activated when a particular button is run or a particular event occurs. -
Page 46: Security Mode Event Buttons
Security Mode Event Buttons Pressing the 2 (SEC) key allows you to select the event button that will be activated when a security mode changes: 0=OFF 1=DAY 2=NIGHT ↕ 3=AWAY 4=VACATION After the security mode is selected, an additional menu appears which allows you to further specify the button. For example, you would like to activate a button when you arm the system into the 3 (AWAY) mode: WHEN AWAY: 1=DELAY 2=CODE... -
Page 47: All On/Off Event Buttons
All On/Off Event Buttons Pressing the 4 (ALL) key allows you to specify a event button activated by issuing an All On or an All Off command. You are first prompted to specify whether the event button is for All Lights On or for All Off: 0=ALL OFF 1=LIGHTS ON Alarm Event Buttons... -
Page 48: Edit Program Command
SELECT BUTTON: ↓ WHEN PHONE DEAD The arrow keys are used to select from a list of event buttons: • WHEN ENERGY LO • WHEN ENERGY MID • WHEN ENERGY HI • WHEN ENERGY CRIT • WHEN PHONE DEAD • WHEN PHONE RING •... -
Page 49: Program Button Commands
0=OFF 1=DAY 2=NIGHT ↓ 3=AWAY 4=VACATION 5=DAY INST 6=NIGHT DLY ↑ 8=BYPASS 9=RESTORE Select (0-6) to arm the system into the desired mode or select the 8 key to Bypass and the 9 key to Restore a security zone. Program Button Commands Select the 3 (BUTTON) key to program a button to automatically execute. -
Page 50: Program Security Mode Conditions
UNIT: ↓ ENTER UNIT Enter the unit number followed by the ' # ' key, or use the arrow keys to select the unit. The unit is displayed and the display prompts for the state of the unit: IF Porch Light: 0=OFF 1=ON Program Security Mode Conditions Press the 2 (SEC) key to specify that the program should only execute if the security system is armed in a particular mode. -
Page 51: Set Up Dial
SELECT CONDITION: ↕ NEVER Choose "NEVER" if you wish to temporarily deactivate a program without deleting it. Other conditions include: • IF LIGHT • IF DARK • IF ENERGY LO • IF ENERGY MID • IF ENERGY HI • IF ENERGY CRIT •... -
Page 52: Rings Before Answer
You can issue commands from a local (in-house) phone with Remote Commands Ok set to Yes or No. The default for Remote Commands Ok is Yes. Rings Before Answer Your phone must ring this number of times before the OmniLT will answer an incoming call to your phone. To change Rings Before Answer, enter the new number from 1 to 15, then press the ' # ' key. -
Page 53: Dial Out Numbers 2-8
For example, if your normal work hours are 8 to 5 Monday through Friday, then set Dial Out 1 On to 8:00 AM MTWTF and Dial Out 1 OFF to 5:00 PM MTWTF. With these settings, the system will call Dial Out Number 1 only if the alarm is activated on weekdays between the hours of 8:00 AM to 5:00 PM. -
Page 54: Audible Exit Delay
Audible Exit Delay The Audible Exit Delay is an audible indication from the console beeper while the exit delay is in effect. During the last 10 seconds of the exit delay, the audible indication will beep twice as fast to let you know that you must leave at once. The default setting for Audible Exit Delay is Yes. -
Page 55: Announce Alarms
• Any Control functions • Any Temperature Control • View the Event Log • Access the system from a local phone With High Security Mode Off, no code is required to access a local telephone. If your system is set up with High Security On, the display will request the Master or Manager code whenever you select one of these functions, even if the security system is Off. -
Page 56: All On
The default setting for X-10 All Off is On. X-10 All On This feature allows you to choose if X-10 or ALC will respond to All On commands. X-10 ALL ON: ↕ 0=NO 1=YES The default setting for X-10 All On is On. Time Clocks There are three time clocks in the system are used to conditionalize programs. -
Page 57: Daylight Savings
ZONE NAME ATLANTIC EASTERN CENTRAL MOUNTAIN PACIFIC YUKON ALASKA-HAWAII BERING The value specified for longitude may be adjusted to correct for areas, such as Nova Scotia, where the local time differs from Greenwich Mean Time by a non-hourly amount. The calculated time of sunrise/sunset will change by four minutes for every degree change in longitude. -
Page 58: Set Up Names
NUMBER DESCRIPTION First Sunday Second Sunday Third Sunday Fourth Sunday Last Sunday Next to Last Sunday Third from Last Sunday Set Up Names The system can be set up to display descriptive names such as "FRONT DOOR", "JOHN'S BEDROOM", or "PORCH LIGHT" for zones, units, buttons, codes, temperatures, and messages. -
Page 59: Set Up Address
To enter a voice description, enter the one, two, or three digit code shown in Table 2 in the Appendix C for each description (word or group of words), then press the ' # ' key. After you have entered the complete description for each item (unit, zone, button, code, temperature, and message), press the ' # ' key twice. -
Page 60: Underwriter's Laboratories Requirements
UNDERWRITER'S LABORATORIES REQUIREMENTS For a complete list of requirements and restrictions when installing the OmniLT panel in a UL Listed system, refer to the Underwriter's Laboratories Requirements section of the Installation Manual (21I00-1). When used in UL Listed Installations, the following items apply: The "High Security Mode"... -
Page 61: Federal Communication Commission Notice
FEDERAL COMMUNICATION COMMISSION NOTICE: This equipment complies with Part 68 of FCC Rules. On the door, inside of the OmniLT enclosure, is a label that contains, among other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment. If requested, provide this information to your telephone company. -
Page 62: Canadian Industry Canada Notice
CANADIAN INDUSTRY CANADA NOTICE Notice: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The Industry Canada does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. -
Page 63: Appendix A - Specifications
APPENDIX A - SPECIFICATIONS Size: Controller: 9.1W x 12.1H x 3.5D Console: 4.6W x 4.5H x 1.2D Weight: Controller: approx. 4.5 lb. Console: approx. 0.5 lb. Operating 32 - 122 degrees F (0 - 50 degrees C) Ranges: 10 - 95 % relative humidity, non-condensing Power: 120 VAC, 60 Hz, 60 watts Transformer:... -
Page 64: Appendix B - Character Codes
APPENDIX B - CHARACTER CODES CODE CHAR CODE CHAR CODE CHAR CODE CHAR SPACE " < & > ¥ × ¯ à ß... -
Page 65: Appendix C - Voice Descriptions
APPENDIX C - VOICE DESCRIPTIONS CODE DESCRIPTION CODE DESCRIPTION ELEVEN APPLIANCE TWELVE AREA THIRTEEN ATTIC FOURTEEN AUTO FIFTEEN AUXILIARY SIXTEEN AWAY SEVENTEEN BACK EIGHTEEN BASEMENT NINETEEN BATH BATTERY TWENTY THREE BOY'S THIRTY BRIGHTER FOUR BUILDING FORTY BURGLAR FIVE BUTTON FIFTY BYPASS CANCEL SIXTY... - Page 66 CODE DESCRIPTION CODE DESCRIPTION DRIVEWAY LIGHT DURESS LISTEN EAST LIVING EMERGENCY ENERGY MAIN ENTER MASTER ENTRY MEDICAL EVENTS MINUS EXIT MINUTES FAMILY MODE MOTION FIRE NIGHT FOYER NORTH FREEZE FRONT FUSE NUMBER GARAGE NURSERY GIRL'S OFFICE GLASS GOOD-BYE GOTO GUEST OUTDOOR OUTLET HALL...
- Page 67 CODE DESCRIPTION CODE DESCRIPTION PUMP THERMOSTAT READY TIME RECORD TIMED REMOTE REPEAT TROUBLE RESTORE TRIPPED RIGHT UNIT RISE ROOM VACATION SAVER WATER SECONDS WEST SECURE WINDOW SECURITY ZONE SETTING STOCK SHOP UTILITY SIDE EQUIPMENT SILENT COMPUTER SOUTH APARTMENT STAIRS STAR STATUS STEPS STORAGE...
- Page 70 NOTE TO INSTALLER Following installation, this manual shall be left for the homeowner's use. • • New Orleans, LA U S A...