Table of Contents
Chapter 4
Configuring the PA-A2 ATM CES Port Adapter
•
•
•
Displaying ATM Information
You can use atm show commands to display the current state of the ATM network and the connected
VCs.
•
•
•
•
Use the show atm vc command to display the following types of statistics for all PVCs:
Router# show atm vc
Interface Name
6/0
6/0.300
Use the show atm vc n command, where n is the VCD unique index value, to display statistics for a
given PVC:
Router# show atm vc 4
ATM6/0.300: VCD:4, VPI:8, VCI:88
VBR-NRT, PeakRate:30000, Average Rate:30000, Burst Cells:20000
AAL5-LLC/SNAP, etype:0x0, Flags:0x20, VCmode:0x0
OAM frequency: 0 second(s)
VC TxRingLimit: 1179 particles
InARP frequency: 15 minute(s)
OL3460-01
Use the debug atm errors command to display errors. The command displays information from all
detected ATM errors. This includes such errors as encapsulation failures and errors during ATM
configuration.
Router# debug atm errors
Use the debug atm events command to display ATM events. The command displays event changes
to the PA-A2 ATM CES port adapter; reset, VC configurations, and PA-A2 ATM CES port adapter
configurations are displayed.
Router# debug atm events
Use the debug atm oam command to display information about OAM cells. The command displays
the contents of OAM cells as they arrive from the network.
Router# debug atm oam
Use the no debug command to turn off debugging after using a debug command.
Use the show atm vc [vcd] command to show current VCs and traffic information. Specifying a
VCD displays specific information about that VCD.
Router# show atm vc [vcd]
Use the show atm interfaces command to show current information about an ATM interface. The
command displays ATM-specific information about an interface.
Router# show atm interfaces
Use the show atm traffic command to show current ATM traffic. The command displays global
information about traffic to and from all ATM networks connected to the router.
Router# show atm traffic
Use the show atm map command to show the current ATM mapping. The command displays the
active list of ATM static maps to remote hosts on an ATM network.
Router# show atm map
VCD/
VPI
VCI Type
1
10
100
4
8
Troubleshooting the PA-A2 ATM CES Port Adapter Installation and Configuration
Peak Avg/Min Burst
Encaps
SC
PVC
SNAP
VBR
88
PVC
SNAP
VBR
PA-A2 ATM CES Port Adapter Installation and Configuration
Kbps
Kbps
Cells Status
33920
0
0
UP
30000
30000 20000
UP
4-23
Table of Contents
