Table of Contents
Description of the appliance
Functions
There are two possible mode:
• Suction of air outside with a flue (optional) and
a discharge tube.
• Recirculating using a carbon filter (optional). .
Attention! The EFCR 943-941 models have been
designed exclusively as suction versions and must
therefore be connected to an external suction
system.
The discharge tube cannot be connected to a
flue of other apparatuses functioning with
sources of power other than electricity, e.g.
a boiler or a fireplace.
Accessories
The following accessories are supplied with the
hood:
• 1 cap complete with commands, lighting and
ventilation motor (the EFCR 943-941 models
lack the motor and must therefore be connected
to an external suction system);
• 1 telescopic flue consisting of an upper U
section and a lower U section;
• 1 montage template;
• 1 baffle (only the EFC 9436-9416 models);
• 1 plastic container with a wall consol for fixing
the hood, wall dowels and screws and the
documentation;
The following accessories can be ordered from
your dealer:
• Carbon filter, Type 20. An active carbon filter
must be used when the hood is connected to a
"recirculating" system.
Extraction mode
• In this mode fumes are extracted to the outside
via a hose connected to the coupling ring A.
Fig. 1.
• In order to obtain the best performance the hose
should have a diameter equal to the outlet hole.
Recirculation mode
Attention! The EFCR 943-941models have been
designed exclusively for extraction mode and must
therefore be connected to an external suction
system.
• The air is filtered through a charcoal filter and
returned to the kitchen.
• You will need an original charcoal filter Type 20
for the recirculation mode. (See Special
Accessories).
Fig. 1
53
D
A
Table of Contents
