Related Manuals for HP Compaq LA1956x
Summary of Contents for HP Compaq LA1956x
- Page 1 HP Compaq LA1956x, LA2006x, LA2206x, and LA2306x LED Backlit LCD Monitors User Guide...
- Page 2 Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyright.
-
Page 3: About This Guide
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. - Page 4 About This Guide ENWW...
-
Page 5: Table Of Contents
HP LCD Monitors ........................1 2 Setting Up the Monitor ...................... 3 Unfolding the Monitor Pedestal Base ..................3 Attaching the Stand to the HP LA1956x Monitor ................4 Rear Components ........................5 Connecting the Cables ......................6 Front Panel Controls ....................... 10 Adjusting the Monitor ...................... - Page 6 ENWW...
-
Page 7: Product Features
● (connects to USB devices) USB cable provided to connect the monitor's USB hub to the USB connector on the computer ● Supports an optional HP speaker bar ● Plug and play capability if supported by the system ● Privacy filter slots to insert filters (purchased separately) to block side screen viewing ●... - Page 8 Intelligent Management AssetControl ● Compliant with the following regulated specifications (for additional certifications and agency ● notices, refer to the HP LCD Monitors Reference Guide on the CD included with this monitor): European Union CE Directives ◦ Swedish TCO Requirements ◦...
-
Page 9: Setting Up The Monitor
Unfolding the Monitor Pedestal Base NOTE: The following steps apply to the HP LA2006x, LA2206x, and LA2306x models. Lift the monitor from its box and place it face down on a flat surface. Hold down the monitor base with one hand (1) then grasp the top of the stand with the other hand and unfold the display head 90 degrees (2). -
Page 10: Attaching The Stand To The Hp La1956X Monitor
Attaching the Stand to the HP LA1956x Monitor NOTE: The following steps apply only to the HP LA1956x model. Lift the monitor from its box and place it face down on a flat surface. Attach the base to the stand. -
Page 11: Rear Components
Rear Components Figure 2-2 Rear Components Component Function AC Power Connector Connects the AC power cord to the monitor. DisplayPort Connects the DisplayPort cable to the monitor. DVI-D Connects the DVI-D cable to the monitor. Connects the VGA cable to the monitor. USB Upstream Connector Connects the USB hub cable to the monitor's USB hub connector and to a host USB port/hub. -
Page 12: Connecting The Cables
Remove the cable management clip from the pedestal by pulling outward on the two sides of the clip (1) then lifting the clip off the pedestal (2). Figure 2-3 Removing the Cable Management Clip Figure 2-4 Removing the Cable Management Clip (HP LA1956x Model) Chapter 2 Setting Up the Monitor ENWW... - Page 13 Connect a VGA signal cable, DVI-D signal cable, or DisplayPort signal cable. Refer to Figure 2-5 Connecting the Cables on page 8Figure 2–7 and Figure 2-6 Connecting the Cables (HP LA1956x Model) on page 8Figure 2–8. NOTE: The monitor is capable of supporting either analog or digital input. The video mode is determined by the video cable used.
- Page 14 Figure 2-5 Connecting the Cables Figure 2-6 Connecting the Cables (HP LA1956x Model) WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
- Page 15 Figure 2-7 Installing the Cable Management Clip Figure 2-8 Installing the Cable Management Clip (HP LA1956x Model) Connecting the Cables ENWW...
-
Page 16: Front Panel Controls
Power LED Blue = Fully powered. Amber = Sleep mode. Flashing Amber = Sleep Timer mode. NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library at http://www.hp.com/go/sml. Chapter 2 Setting Up the Monitor ENWW... -
Page 17: Adjusting The Monitor
Adjusting the Monitor NOTE: Your monitor model may look different than the model in the following illustrations. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 2-10 Tilting the Monitor Swivel the monitor to the left or right for the best viewing angle. Figure 2-11 Swiveling the Monitor Adjusting the Monitor... - Page 18 Figure 2-12 Adjusting the Height Figure 2-13 Releasing the Lock Pin and Adjusting the Height (HP LA1956x Model) Chapter 2 Setting Up the Monitor ENWW...
-
Page 19: Turning On The Monitor
Pivoting the Monitor NOTE: To view information on the screen in portrait mode, you can install the HP Display Assistant software included on the software and documentation CD. The position of the OSD menu can also be rotated to portrait mode. To rotate the OSD menu, access the OSD menu by pressing... -
Page 20: Connecting Usb Devices
NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be enabled. To disable this feature, press and hold the monitor power button for 10 seconds. NOTE: You can disable the power LED in the OSD menu. Press the Menu button on the front of the monitor, then select Management >... -
Page 21: Removing The Monitor Pedestal Base
You can remove the monitor panel from the pedestal base to install the panel on a wall, a swing arm, or other mounting fixture. NOTE: The following steps apply to the HP LA2006x, LA2206x, and LA2306x Models. CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. -
Page 22: Removing The Stand From The Hp La1956X Monitor
You can remove the monitor panel from the monitor stand to attach the panel to a wall, a swing arm, or another mounting fixture. NOTE: The following steps apply only to the HP LA1956x Model. Lay the monitor face down on a flat surface covered by a clean, dry cloth. Remove the four screws from the monitor stand. -
Page 23: Mounting The Monitor
Mounting the Monitor The monitor panel can be attached to a wall, swing arm, or other mounting fixture. NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket. Remove the monitor panel from the pedestal base. Refer to Removing the Monitor Pedestal Base on page CAUTION:... -
Page 24: Locating The Rating Labels
Figure 2-20 Locating the Rating Labels Installing a Cable Lock You can secure the monitor to a fixed object with an optional cable lock available from HP. Figure 2-21 Installing a Cable Lock Chapter 2 Setting Up the Monitor... -
Page 25: Finding More Information
The monitor user guide, reference guide, and drivers are available at http://www.hp.com/ support. If the information provided in the guide or in the HP LCD Monitors Reference Guide do not address your questions, you can contact support. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html. -
Page 26: Appendix A Technical Specifications
Technical Specifications NOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. LA1956x Model Table A-1 LA1956x Specifications Display 48.3 cm wide screen 19 inches wide screen Type Twisted Nematic (TN) LED Backlit LCD Viewable Image Size 48.3 cm diagonal... -
Page 27: La2006X Model
Table A-1 LA1956x Specifications (continued) Altitude: 0 to 5000 m 0 to 16,400 feet Operating 0 to 12192 m 0 to 40,000 feet Storage Measured Power Consumption: 35.0 watts Full Power 27.0 watts Typical Settings <15.95 watts Energy Star® Test Methods <0.5 watts Sleep <0.5 watts... -
Page 28: La2206X Model
Table A-2 LA2006x Specifications (continued) Vertical Refresh Rate 50 to 76 Hz Environmental Requirements Temperature 5 to 35° C 41 to 95° F Operating Temperature -20 to 60° C -4 to 140° F Storage Temperature Relative Humidity 20 to 80% Power Source 100 –... -
Page 29: La2306X Model
Table A-3 LA2206x Specifications (continued) Maximum Graphic Resolution 1920 x 1080 (60 Hz) analog input 1920 x 1080 (60 Hz) digital input Optimum Graphic Resolution 1920 x 1080 (60 Hz) analog input 1920 x 1080 (60 Hz) digital input Text Mode 720 x 400 Dot Pitch 0.248 (H) x 0.248 (W) mm... - Page 30 Table A-4 LA2306x Specifications (continued) Tilt -5 to 30° Swivel -180 to 180° Maximum Weight (Unpacked) 6.8 kg 15.0 lbs Dimensions (include base) 46.62 cm 18.37 inches Height (highest position) 35.11 cm 13.83 inches Height (lowest position) 24.95 cm 9.83 inches Depth 55.15 cm 21.73 inches...
-
Page 31: Recognizing Preset Display Resolutions
Recognizing Preset Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen. LA1956x Model Table A-5 Factory Preset Modes Preset... -
Page 32: La2206X Model
LA2206x Model Table A-8 Factory Preset Modes Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz) 640 × 480 31.469 59.940 720 × 400 31.469 70.087 800 × 600 37.879 60.317 1024 × 768 48.363 60.004 1280 × 720 45.00 59.94 1280 ×... -
Page 33: Entering User Modes
Table A-10 Factory Preset Modes (continued) 1680 × 1050 65.29 59.954 1920 × 1080 67.5 60.00 Table A-11 High Definition Video Formats Preset Timing Name Pixel Format Horz Freq (kHz) Vert Freq (Hz) 480p 720 × 480 31.469 576p 720 × 576 31.25 720p50 1280 ×...