Table of Contents
Liquid or powder detergent
1.
3.
B
• Position A for powder detergent (factory setting).
• Position B for liquid detergent.
When you use the liquid detergent:
– Do not use gelatinous or thick liquid detergents.
– Do not put more liquid then the maximum level.
– Do not set the prewash phase.
– Do not set the delay start.
9.3 Setting a programme
1.
Turn the programme knob and set
the programme:
– The indicator
– The display shows the level of the
Time Manager, the programme du-
ration and the indicators of the
phases of the programme.
2.
If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something incorrect, the
display shows the message Err.
flashes.
2.
A
4.
9.4 Starting a programme
without delay start
Press
:
• The indicator
stays on.
• The indicator
display.
• The programme starts, the door is
locked and the display shows the indi-
cator
.
• The drain pump can operate for a short
time when the appliance fills water.
ENGLISH
13
stops to flash and
starts to flash on the
- Quick Links:
- Control Panel
- Technical Data
Hide quick links:
Table of Contents
