Mitsubishi Electric BR-LM1KK Quick Start Manual page 7

10 Fix the bracket on the wall with supplied 4 bolts and

washers.

11 Hang the brackets on the both sides, (2) and (3), on the

hooks. Align height with the center bracket (1) and

horizontal distance from one (refer to page 4 "Hole

location on the wall), and fix them on the wall.

12 For LM55S1/P1, remove 2 screws on the right and left

lower sides of the base bracket. Then slide the positioning

plate to the lower side, and fix it with 2 screws

 This step is not neccessory for LM46P1, portrait and

bottom low in landscape for LM55S1/P1

Screws

13 Attach the bracket at the center of upper row (4). Insert

the protrusion on the top side of the lower bracket to the

angle hole on the bottom side of the upper bracket.

Protrusion

14 In the same manner, attach the brackets on the both

sides of it, (5) and (6).

15 Repeat the procedure to attach all brackets. Make sure

that the vertical and horizontal distance between all

brackets is proper (refer to page 4 "Hole location on the

wall").

Positioning

plate

EN-7