Honeywell ADEMCO 6150RF User Manual
  1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Keypad
  5. 6150RF - Ademco Deluxe Fixed Keypad/Receiver
  6. User manual

Honeywell ADEMCO 6150RF User Manual

Keypad/transceiver
Hide thumbs Also See for ADEMCO 6150RF:
1
2

Quick Links

Keypad Features
DISPLAY
The keypad features a three-digit numeric display for zone identification and pre-designated English-
language prompts (e.g., "ALARM," "AWAY," "STAY," "CHECK," etc.) for indicating system status. (Refer to
Figure 1.)
FUNCTION KEYS
The function keys are located behind a decorative door and are continuously backlit for ease in use. (Refer to
the User's Guide provided with the control panel for detailed instructions on the use of these keys.)
The function keys include keys for panic alarm activation. The panic alarms are activated by pressing key
pairs [1] & [*], [3] & [#], or [*] & [#], or a Special Function Key (see below). Whether these panic keys
function and the type of panic alarms they produce is determined by the control panel's capability and
programming. (Check with your installer for the further information regarding these keys.)
SOUNDER
The sounder is a piezo-electric sounder that pulses for fire alarms and generates a two-tone sound for
burglary and audible panic alarms.
KEYPAD LEDS
The keypad contains two LEDs that indicate the status of the system as follows:
LED
Green (Ready)
Red (Armed)
SPECIAL FUNCTION KEYS
These are four keys located to the left of the numeric keys (refer to Figure 1). The keys may be programmed
by your installer for panic alarms or other special functions such as macros (a frequently used series of key
entries). Function keys must be held down for at least 2 seconds to activate an alarm. (Check with
your installer for the programmed function of these keys.)
Figure 1 - ADEMCO 6150RF Keypad/Transceiver (Front Door Removed)

USER GUIDE

Function
Lights when the system is ready to arm (no zone faults are
present).
Lights when the system is armed.
ARMED
READY
ADEMCO 6150RF
ADEMCO 6150RF
ADEMCO 6150RF
ADEMCO 6150RF
Keypad/Transceiver
Keypad/Transceiver
Keypad/Transceiver
Keypad/Transceiver
1
2
3
OFF
AWAY
STAY
4
5
6
MAX
TEST
BYPASS
7
8
9
INSTANT
CODE
CHIME
0
#
READY
K4461-1V1 8/05 Rev. B
loading

Related Manuals for Honeywell ADEMCO 6150RF

Summary of Contents for Honeywell ADEMCO 6150RF

  • Page 1: User Guide

    Function keys must be held down for at least 2 seconds to activate an alarm. (Check with your installer for the programmed function of these keys.) ARMED AWAY STAY READY TEST BYPASS INSTANT CODE CHIME READY Figure 1 - ADEMCO 6150RF Keypad/Transceiver (Front Door Removed)
  • Page 2 ADEMCO 6150RF. This is particularly useful if a user loses a wireless key. This mode may only be accessed if the ADEMCO 6150RF is powered up for at least 1 minute. Only wireless keys programmed directly into the ADEMCO 6150RF may be enabled and disabled using this mode.