Honeywell VisionPRO IAQ Installation Manual

VisionPRO

Touch-screen Programmable Thermostat

For up to 4 Heat/2 Cool systems with Honeywell THM5421C or equivalent.

Must be installed by a trained, experienced technician.

carefully. Failure to follow these instructions can damage the product or cause a

hazardous condition.

CAUTION: ELECTRICAL HAZARD. Can cause electrical shock or equipment dam-

age. Disconnect power before beginning installation.

MERCURY NOTICE: If this product is replacing a control that contains mercury in a

sealed tube, do not place the old control in the trash. Contact your local waste man-

agement authority for instructions regarding recycling and proper disposal.

This thermostat contains a Lithium battery which may contain Perchlorate material.

Perchlorate Material—special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Installation

Thermostat can be mounted on 2" x 4" J box or on drywall or plaster using included wall

anchors (drill 3/16" holes for drywall; 7/32" holes for plaster).

Connect 1, 2, 3 terminals on thermostat to 1, 2, 3 terminals on EIM or Zone Panel; see EIM or

Zone Panel Installation Guide for wiring diagrams.

Set date/time

TUE

Date

Month

2006

Year

DONE

Press DONE to save changes

® U.S. Registered Trademark. US Patent No. 6,208,263; 6,373,376;

6,448,901; 6,595,430; 7,012,927; 7,044,397; D509151 and other patents

pending. Copyright © 2011 Honeywell International Inc. All rights reserved.

IAQ

®

15

6

Installation

Guide

Read these instructions

Time

TUE

1:00

DONE

Press DONE to exit

6

PM

69-1816EFS-09