Quick Links
Video | LTC 0510 Series DinionXF Monochrome Cameras
LTC 0510 Series DinionXF Monochrome
Cameras
www.boschsecurity.com
The LTC 0510 Series of High Performance 1/2-inch
Digital CCD Monochrome Cameras create the best
possible image, even under the most difficult light and
scene conditions. Based on unique 15-bit digital video
processing technology and employing XF-Dynamic,
these cameras provide the ultimate sensitivity with
extended dynamic range. By employing the best 1/2-
inch CCD available, advanced front end processing,
combined with the outstanding Dinion DSP, the
cameras achieve an astonishing sensitivity, providing
better images in low light situations and sharper
daytime images.
All Dinion cameras are supplied ready to operate.
Simply attach and focus the lens, and connect power
to provide optimal pictures under virtually all scene
conditions. No tools are required for back focus and
power connection. For extra challenging situations
where fine tuning or special settings are required, the
camera parameters can be individually set using the
control buttons on the side of the camera and On-
screen Display (OSD). Also, to aid installation, the
camera automatically detects the lens type, and using
the Lens Wizard ensures accurate (back) focusing for
perfectly sharp pictures at all times.
15-bit DSP technology
u
XF-Dynamic
u
Bilinx communication
u
Default shutter
u
Lens wizard
u
Functions
XF-Dynamic
Extended dynamic range is brought to a new level on
the LTC 0510 Series Camera by XF-Dynamic
technology. XF-Dynamic automatically processes the
highly accurate 15-bit digital signal to optimally
capture the detail in both the highlight and lowlight
areas of the scene simultaneously, to maximize the
information visible in the picture.
Bilinx Technology
The LTC 0510 series cameras incorporate Bilinx. Bilinx
is a bidirectional communication capability embedded
in the video signal of all Bosch Dinion cameras. With
Bilinx technicians can check status, change camera
settings and even update firmware from virtually
anywhere along the video cable. Bilinx reduces service
and installation time, provides for more accurate setup
and adjustment, and improves overall performance. In
addition, Bilinx uses the standard video cable to
transmit alarm and status messages, providing
superior performance without additional installation
steps.
Related Manuals for Bosch LTC 0510 Series
Summary of Contents for Bosch LTC 0510 Series
- Page 1 Simply attach and focus the lens, and connect power in the video signal of all Bosch Dinion cameras. With to provide optimal pictures under virtually all scene Bilinx technicians can check status, change camera conditions.
- Page 2 Quantit Component Lens Wizard The LTC 0510 series automatically detects the type of LTC 0510 Series Dinion Monochrome Camera lens installed. The Lens Wizard will focus the lens at Spare male 4–pin lens connector...
- Page 3 3 | LTC 0510 Series DinionXF Monochrome Cameras Active Pixels 1) F/1.2, 89% reflection, SenseUp off Mechanical CCIR Models: 752 H x 582 V Dimensions (H x W x L) 59 x 67 x 122 mm (2.28 x 2.6 x 4.8 inch)
-
Page 4: Software Options
Fax: +65 6571 2699 Phone +86 21 22181111 Fax: +55 19 2103 2862 www.boschsecurity.us www.boschsecurity.com [email protected] Fax: +86 21 22182398 [email protected] www.boschsecurity.asia www.boschsecurity.com.cn www.boschsecurity.com © Bosch Security Systems 2013 | Data subject to change without notice 2001146123 | en, V2, 04. Oct 2013...