Sip General Configuration Menu; Line Settings Menu (Sip Phones Only) - Cisco 7945G Administration Manual
For cisco unified communications manager 6.1(3)
Hide thumbs
Also See for 7945G:
- User manual (104 pages) ,
- Quick manual (12 pages) ,
- Admin manual (6 pages)
Table of Contents
Device Configuration Menu
Table 4-6
SIP General Configuration Menu Options (continued)
Option
Description
Enable VAD
This value is set to No by default.
Start Media Port
Displays the start Real-Time Transport Protocol (RTP) range
for media.
End Media Port
Displays the end Real-Time Transport Protocol (RTP) range
for media.
NAT Enabled
Displays if Network Address Translation (NAT) is enabled.
This value will always be set to false.
NAT Address
Displays the WAN IP address of the NAT or firewall server.
This value will always be set to null.
Call Statistics
This value is set to No by default.
Related Topics
•
•
Line Settings Menu (SIP Phones Only)
The Line Settings menu displays information that relates to the configurable parameters for each of the
lines on a SIP phone.
Table 4-7
Line Settings Menu Options
Option
Name
Short Name
Authentication Name
Display Name
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-14
Displaying a Configuration Menu, page 4-2
Device Configuration Menu, page 4-11
Table 4-7
Description
Displays the lines and the number used to register each
line.
Displays the short name configured for the line.
Displays the name used by the phone for authentication if
a registration is challenged by the call control server
during initialization.
Displays the identification the phone uses for display for
caller identification purposes.
Chapter 4
describes the options in this menu.
Configuring Settings on the Cisco Unified IP Phone
To Change
From Cisco Unified Communications
Manager Administration, choose
Device >
Device Settings > SIP Profile.
From Cisco Unified Communications
Manager Administration, choose
Device >
Device Settings > SIP Profile.
From Cisco Unified Communications
Manager Administration, choose
Device >
Device Settings > SIP Profile.
Display only—cannot configure.
Display only—cannot configure.
From Cisco Unified Communications
Manager Administration, choose
Device >
Device Settings > SIP Profile.
To Change
Use Cisco Unified Communications
Manager to modify.
Use Cisco Unified Communications
Manager Administration to modify.
Use Cisco Unified Communications
Manager Administration to modify.
Use Cisco Unified Communications
Manager Administration to modify.
OL-17755-01
Table of Contents
Troubleshooting
