Bag Changing; Cleaning Exterior And Attachments - Kenmore 116.28014 Use & Care Manual

Hide thumbs Also See for 116.28014:
Table of Contents
Available languages

Available languages

BAG CHANGING
For best cleaning
results, the dust bag
should be changed
often. The electronic
performance
indicator
will come on when
the bag needs to be changed
or the airflow
is blocked.
NOTE: See PARTSAND FEATURES for Bag
Number.
1.Turn off and
unplug vacuum
cleaner.
2. Remove hose
from canister.
3. Pull hood
release out and up,
then lift canister
hood.
4. Disengage
cardboard tab from
red bag mount by
pulling away and
lifting up.
Motor
Safety
_,
5. Pull bag out of
the red bag
mount.
6. Check the
motor safety filter
and replace, if
necessary.
7. The red bag mount will flip forward after
removing bag. This will prevent the hood
from closing until a new bag is installed.
Note:
DO NOT bend or crease the middle
ofthe cardboard when installing the bag
into the bag mount slots.
8. Rotate red bag
mount down and
install bag into slots
per illustration,
pushing down until
the cardboard tab
locks into position
and the holes align.
9. Tuck the bag securely
into the bag
cavity so that none of the bag is able to be
pinched
by the hood.
10. Close and latch canister
hood.
1|. Insert hose into canister until it snaps in
place.
12. Plug cord into wall outlet.
CAUTION
NEVER REUSE A DUST BAG. Very fine
materials,
such as carpet
freshener, face
powder, fine dust, plaster, soot, new car-
pet llnt, etc. can clog the bag and cause it
to burst before
it is full and may cause
damage
to vacuum
cleaner
motor.
Change bag more often when
vacuuming
these materials.
CLEANING
EXTERIOR AND ATTACHMENTS
1. Turn off and unplug vacuum cleaner. DO
NOT drip water on vacuum cleaner.
2. To clean exterior, or to reduce static
electricity and dust build-up, wipe outer
surface of vacuum cleaner and attach-
ments. Use a clean, soft cloth that has
been dipped in a solution of mild liquid
detergent and water, then wrung dry. Wipe
dry after cleaning.
,CAUTION
Do not use attachments
if they are wet.
Attachments
used in dirty areas, such as
under a refrigerator,
should not be used on
other surfaces until they are washed. They
could leave marks.
=17=

Hide quick links:

Table of Contents
loading

Table of Contents