Table of Contents
■
■
■
■
■
■
2.
Before recording the video to DVD
■
■
■
■
■
3.
About recorded DVDs
■
■
■
TOSHIBA DVD PLAYER
Please be aware of the following limitations when you use the TOSHIBA
DVD PLAYER.
User's Manual
Do not enter sleep or hibernation mode while using DVD
MovieFactory.
Do not operate DVD MovieFactory immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
CD recorder, DVD-Audio, mini DVD and Video CD functions are not
supported in this version.
While recording video to DVD, please close all other programs.
Do not run software like a screen saver because it can put a heavy
load on the CPU.
When you record DVD disc, please use only discs recommended by
the Drive manufacturer.
Do not set the working drive to a slow device like a USB 1.1 hard
disk drive or it will fail to write DVD.
Do not perform any of the following actions:
■
Operate the computer for any other function, including using a
mouse or touchpad, or closing/opening the display panel.
■
Bump or cause vibration to the computer.
■
Use the Mode control button and Audio/Video control button to
reproduce music or voice.
■
Open the DVD drive.
■
Install, remove or connect external devices, including items such
as a Secure Digital(SD), Secure Digital High Capacity(SDHC),
Memory Stick(MS), Memory Stick Pro(MS Pro),
MultiMediaCard(MMC), xDPicture Card(xD), ExpressCard, USB
device, external monitor, or an optical digital device.
Please verify your disc after recording important data.
DVD-R/+R/+RW disc cannot be written in VR format.
Some DVD-ROM drives for personal computers or other DVD
players may not be able to read DVD-R/+R/-RW/-RAM discs.
When playing your recorded disc on your computer, please use
TOSHIBA DVD PLAYER software application.
If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
Operating Basics
4-27
Table of Contents
