Table of Contents
Setup
Setup Flow
The following is an overview of the setup procedure.
Connect the unit, shared file server, and web client
within a LAN (see page 11).
Configure the shared file server (see page 11).
Configure the network settings from the web client
(see page 12).
Mount the shared directory of the shared file server
from the web client (see page 12).
Preparation
Connect the unit, shared file server, and web client within
the same segment of the LAN (Gigabit Ethernet).
Shared file server
Web client
Shared file server
The shared file server consists of a shared disk and stores
image data transferred from an SRMemory card.
The file server must support NFS server and CIFS server
functions. Any operating system is acceptable.
If an eSATA card is installed in the PCIe expansion slot,
an HDD connected via eSATA can be used as a shared
disk in place of a file server.
r
r
r
Switching hub
SRPC-5 or SR-PC4
Web client
The web client is a PC or workstation used to operate the
unit via the web application. It can also be used as a shared
file server.
A web browser is required (Internet Explorer, Safari,
Firefox, etc.). Any operating system is acceptable.
Note
Only one shared file server can be connected to the unit.
Up to five web clients can be connected to the unit at one
time.
Shared File Server Settings
Configure permission settings for the shared directory
mounted by the unit. Grant read, write, and execute
permissions to the unit (i.e., users).
You can configure the user ID and group ID in the
NETWORK tab of the DIAGNOSIS menu.
For details on file server settings, consult your system
administrator.
Displaying the Web Application
Screen
Enter the IP address of the unit in the address bar of the
web browser to display the web application screen of the
unit on the web client.
Enter the IP address of the unit here.
Notes
• The factory default setting for the IP address is
192.168.0.1. When displaying the web application
screen for the first time, enter "192.168.0.1" in the
address bar of the web browser.
• Before accessing the unit, make sure Javascript and
cookies are enabled in the web browser.
• When the web application of the unit is used, the
[Return] and [Update] buttons in the browser menu do
not operate. If the display of the browser cannot be
updated or abnormality has occurred in the display
contents, do not click the [Update] button. In this case,
re-enter the IP address of the unit.
11
Setup
Table of Contents
