1 hard drive
2 bottom of base assembly
3 M3 x 3-mm screws (2)
5. Remove the M3 x 3-mm screw on the hard drive bezel.
6. Remove the hard drive bezel.
1 hard drive bezel 2 pin on bezel bracket
3 hard drive
4 M3 x 3-mm screw
7. Remove the two M2.5 x 5-mm screws from the cover of the hard drive carrier.
8. Lift the cover up at an angle and slide the tabs on the cover out from the carrier.
1 M2.5 x 5-mm screws (2) 2 cover
3 tabs (2)
4 hard drive carrier
9. Slide the hard drive away from the connector, lift it up at an angle, and then slide it out of the hard drive carrier.