Table of Contents
(28)
Make sure X:\W2K\Addprt is displayed in the window and click OK (X:\ is the drive
letter of your CD-ROM).
(29)
Highlight the model you are installing from the list of machines and click Next.
(30)
The model you are installing will be listed in the window. Select Yes or No if you want
this driver to be your default printer.
(31)
Select Do not share this printer and Next.
(32)
Select Yes and Next to print a test page.
(33)
When this screen appears, click Finish.
(34)
If the Digital Signature Not Found dialog box appears, click Yes.
(35)
If the test page printed, click OK.
NOTE:
There will be two Brother printer drivers listed in the Printers selection.
The driver with "Printer" after the model name (ex. Brother MFC-8840D Printer) is the
Brother Native Driver.
OK:
The Brother Native Drivers have been installed and the installation is now complete.
®
< For Windows
XP Users Only >
Make sure that you followed the instructions in (1) to (16) on
(17)
When this screen appears, connect the USB interface cable to your PC, and then
connect it to the machine.
Turn on the machine by plugging in the power cord. Turn the power switch on.
It will take a few seconds for the installation screen to appear.
The installation of the Brother drivers will automatically start. The screen appears one
after another, please wait for a while.
(18)
The README.WRI file will be displayed.
Please read this file for troubleshooting information and then close the file to continue
installation.
(19)
Click Finish to restart your computer.
OK:
This completes the installation of the Windows
the Brother PC-FAX and scanner drivers.
Brother also offers a Native Driver on the CD-ROM. The Brother Native Driver offers
some features that are not available with the Windows
the Brother Native driver proceed to step (20).
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
pages 2-8 to
®
Logo Tested (WHQL) printer driver and
®
Logo Tested Driver. To install
2-11
SERVICE MANUAL
2-9.
Chapters
Table of Contents
Troubleshooting
