Heat Sink - HP Pavilion TouchSmart 11-e000 Maintenance And Service Manual

6.

Remove the system board (3) by sliding it up and to the left an angle.

Reverse this procedure to install the system board.

Description

Heat sink (includes 4 captive screws and replacement thermal material)

Before removing the heat sink, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the battery (see

a.

Service cover (see

b.

Hard drive (see

c.

Display assembly (see

d.

Bottom cover (see

Battery on page

27), and then remove the following components:

Service cover on page

Hard drive on page

29)

Display assembly on page

Bottom cover on page

28)

37)

42)

Component replacement procedures

Spare part number

730902-001

55