Table of Contents
Available languages
Available languages
Quick Links
NOTE: The basic timer is externally arranged in different configuration in various appliance models. This does not
change the way it operates.
NOTE: Some models have a touch pad control. To activate it, you just have to touch the pad with a finger. Take care to
have a good contact between the finger and the touch pad. Long nails can make the activation difficult. It is a good idea
to clean the control panel after each use or as soon as possible after a spill, boil over or spatter because some ionic
or salty ingredients as ketchup, tomatoes sauce, etc. can operate the control. Before cleaning the control panel it is
recommended to turn on the control lockout feature.
Control Pad Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various functions of the oven as described below.
CLOCK
BAKE TIME
SET PAD—
PAD— Used to
Used to set
enter the length
the time of
of the baking
day.
time.
TIMER ON/OFF
PAD— Used to
Clock
set or cancel
Horloge
the minute timer.
The minute timer
does not start
or stop cooking.
Timer
Also, TIMER
On/Off
ON/OFF pad is
Minuterie
used to set the
Continuous Bake
feature.
START TIME PAD— Used
to set the desired start time
for baking & Self-Clean. May
be used with COOK TIME to
program a delayed bake or
clean cycle.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold
when a pad is pressed. To return the sound, press and hold
Printed in United States
ELECTRONIC OVEN CONTROL GUIDE
Note: The time of day must first be set in order to operate the oven.
UP and DOWN ARROW PADS— Used along
with the function pads to select oven temperature,
cook time, start time (when programming an
automatic start time), time of day, clean time
and minute timer.
Bake time
Temps de
cuisson
Start time
Heure de
départ
Self-Cleaning Oven
Four Autonettoyant
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN" light will glow each
time the oven turns on to maintain the set oven temperature. The "PREHEAT" light
will glow when the oven is first set to operate, or if the desired temperature is reset
higher than the actual oven temperature. The "DOOR LOCKED" light will flash when
the oven door locks and unlocks or when using the Self-Clean cycle or the oven door
lockout is activated. The indicator light will glow constantly after the door locks.
Start time
Heure de
départ
. After 7 seconds, the control will beep once. This will block the controls from sounding
BAKE
PAD—Used to
select the bake
function.
Oven
Four
Preheat
Préchauffage
Door Locked
Porte Verrouillée
Start time
Heure de
départ
again for 7 seconds until the control beeps once.
1
FEATURE
INDICATOR
LIGHTS— These light
to show which feature
is in use.
SELECT SELF-
Bake
Broil
CLEAN PAD—
Cuire
Griller
Used to select the
Self-Cleaning cycle.
A 2 or 3 hour Self-
Clean time may be
selected.
Clean
Clear/Off
Nettoyer
Annuler
Controls
CLEAR OFF PAD—
Used to clear any
function previously
entered except the
time of day and minute
timer. Press CLEAR
OFF to stop cooking.
Also the CLEAR OFF
pad is used to activate
controls and oven door
lockout setting.
318200183 (0903) Rev. B
BROIL PAD—
Used to select
the variable broil
function.
Table of Contents
Related Manuals for Frigidaire 318200183 (0903)
Summary of Contents for Frigidaire 318200183 (0903)
-
Page 1: Control Pad Functions
ELECTRONIC OVEN CONTROL GUIDE NOTE: The basic timer is externally arranged in different configuration in various appliance models. This does not change the way it operates. NOTE: Some models have a touch pad control. To activate it, you just have to touch the pad with a finger. Take care to have a good contact between the finger and the touch pad. -
Page 2: Setting Oven Controls
Note: The time of day must first be set in order to operate the oven. To Set the Clock When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00". - Page 3 Setting Oven Controls (cont’d) To Set or Change the Temperature for Baking The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C). To Set the Controls for Baking: Bake Cuire 1. Press . "— — —°" appears in the display. 2.
- Page 4 Setting Oven Controls (cont’d) To Set the Timed Bake and Delay Start Features Bake time Start time Temps de Heure de départ cuisson BAKE TIME and START TIME pads operate the features that will turn the oven ON and OFF at the times you select in advance.
- Page 5 Setting Oven Controls (cont’d) To Set for Broiling: 1. Arrange the oven rack while oven is still cool. Position the rack as suggested in the Broil Rack Position Table below. Broil Griller 2. Press . " — — "will appear in display. 3.
-
Page 6: Self-Cleaning
Self-Cleaning Self-Clean Time Length For satisfactory results, use a 2 hour Self-Clean cycle for light soils or a 3 hour cycle for average or heavy soils. NOTE: The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the Self- Clean cycle. -
Page 7: Adjusting The Oven Temperature
Adjusting the Oven Temperature Your oven control has been precisely set at the factory. This setting may differ from your previous oven however, so your recipe times may not give you the results you expect. If you think that the oven is cooking too hot or too cool for your recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed. - Page 8 Notes...
- Page 9 GUIDE DE la commanDE ÉlEcTRonIQUE DU FoUR noTE: L’apparence extérieure de la minuterie peut avoir une configuration différente pour divers modèles d’appareils. Ceci ne change pas son fonctionnement. noTE: Certains modèles ont un panneau de contrôle à touche. Pour l’activer, vous n’avez qu’à appuyer sur une touche avec un doigt.
-
Page 10: Réglage De La Commande Du Four
Réglage de la commande du four note: Aucune commande ne fonctionne si l'horloge n'est pas réglée à l'heure. Réglage de l'horloge Lorsque l'appareil est branché pour la première fois, ou chaque fois que son alimentation a été interrompue, "12:00" clignote à l'écran. Clock Horloge 1. - Page 11 Réglage de la commande du four (suite) Pour régler ou changer la température pour la cuisson au four Le four peut être programmé pour cuire à n'importe quelle température entre 170°F et 550°F (77°C et 288°C). Pour régler la commande du four pour la cuisson au four: Bake Cuire 1.
- Page 12 Réglage de la commande du four (suite) Réglages des fonctions cuisson minutée et cuisson différée (cuisson minutée différée) Bake time Temps de Les touches TEmPS DE cUISSon et cuisson et ÉTEIGNENT le four aux moments que vous avez choisis à l’avance. Le four peut être programmé pour s’allumer immédiatement et s’éteindre automatiquement (cuisson minutée) ou pour s’allumer plus tard pour une cuisson différée et s’éteindre automatiquement (cuisson minutée différée).
-
Page 13: Réglage Du Gril
Réglage de la commande du four (suite) Réglage du gril: 1. Disposez les grilles du four lorsque la température du four est encore basse. Placez la grille selon les suggestions du tableau de position de la grille pour le gril ci-dessous. Broil Griller 2. -
Page 14: Cycle Autonettoyant
cycle autonettoyant Durée du cycle autonettoyant Pour de meilleurs résultats, utilisez un cycle autonettoyant de 2 heures pour de la saleté légère ou un cycle de 3 heures pour de la saleté moyenne à importante. noTE: Vous devez bien aérer la cuisine en ouvrant une fenêtre ou en utilisant un ventilateur ou une hotte durant le cycle autonettoyant. -
Page 15: Ajustement De La Température Du Four
ajustement de la température du four La commande électronique de votre four a été réglée de façon précise à l’usine. Ce réglage peut différer de celui de votre ancien four. Les durées indiquées dans vos recettes peuvent donc ne pas vous donner les mêmes résultats. Si vous croyez que le four chauffe trop ou ne chauffe pas assez pour les durées indiquées dans vos recettes, vous pouvez ajuster le régulateur pour que le four chauffe plus ou moins que la température indiquée. - Page 16 notes...