Quick Links
Operating Instructions For
1
4
Introduction
Button Functions
PHAZR-5
The Phazr 5, UR5L-9000L-IP is designed
to operate virtually all IPTV, Digital and
DTA set top boxes plus the majority of TV,
AUD, DVD and AUX equipment on the
Cable Remote Control
market as shown below.
STB : Set-top Box
TV : Televisions
AUD : Audio Receivers
DVD : DVD Players
UR5L-9000L-IP
AUX : Media PC, Gaming System, etc.
2
Replacing Batteries
Before you program or operate the remote
control, you must install two new AA
alkaline batteries.
STEP1 Remove the battery compartment cover
on the back of your remote control.
STEP2 Check battery polarity carefully, and
BACK
install the batteries as shown in the
Return to previous menu screen or TV channel.
illustration below.
STEP3 Replace the battery compartment cover.
IPTV company custom-programmable Macros.
Refer to Section M for programming steps.
My DVR
Digital Video Recording.
DELETE
Edit text on the screen.
5
Programming the Remote Control
3
IMPORTANT SETUP NOTE!
Operations
In this section when you are instructed to press a [DEVICE] button, that means to press either the STB, TV, AUD,
DVD or AUX button, depending on what device you are programming the remote to operate.
DEFAULT STATE:
Device Default: Set-Top Box (STB)
There are four ways you can program your remote:
* Quick Set-Up Method
Channel Default: STB channel and numbers
* The Auto-Search Method
through the STB. You have the option of
controlling your STB channel and numbers
The Quick Set-Up Method is a unique feature that enables the fastest and easiest setup by using a 1 digit
through the TV or AUD. Refer to section L for
code. This is the quickest way to set up devices made by popular manufacturers.
programming steps.
The Pre-Programmed Code Method allows you to setup all of the buttons at once by entering 3-digit
code numbers that correspond with the components manufacture/brand. Code tables for this method
Volume Default: Volume and Mute control are
are on the backside of the operating instructions.
automatically transferred to the respective
Component based on the Device selected:
The Auto-Search Method scans through all of the codes in the remote control, one at a time allowing you
to identify the correct code.
STB:Set-Top Box ; TV:TV ; AUD:AUD. DVD:TV ;
The Learning Method allows you to transfer functions from other remotes to the PHAZR-5one button at a time.
AUX:AUX. You have the option of controlling
Universal Remote Control, Inc.
STB Volume and Mute through the TV, DVD
IMPORTANT SETUP NOTE!
www.universalremote.com
or AUD. Refer to section K for programming
This pertains to all programming steps. When you are in setup mode the device LED will light for 30 seconds. If you do
OCE-0087D Rev 03 (02/27/13)
steps.
not press a button within 30 seconds, the LED light will turn off and exit setup mode, and you will need to start over.
A. Quick Set-Up Method
STEP1 Turn on the component you want to pro-
gram. To program your TV, turn on the TV.
STEP2 Point the remote control at the compo-
nent.
Device Buttons used to select the component
STEP3 Press and hold the [DEVICE] key for 5
you want to operate and signals remote control
activity.
seconds until the Device LED will blink
once and stays on. Continue to hold the
[DEVICE] key and press the number key
assigned to your brand in the Quick
Set-up Code Table. The component
should turn off as soon as the number
key is pressed. (If it does not turn off,
release the [DEVICE] key and use the
Pre-Programmed 3-Digit code Method
or Scanning Method.)
STEP4 Release the [DEVICE] key to save the
code. The Device LED will blink twice to
confirm that the code is stored.
Repeat the steps above for all components
(TV, AUD, DVD, AUX).
INTERACTIVE
B. Quick Set-up Code Tables
View personalized weather, sports, and traffic.
SKIP
Forward ahead in stored or recorded programs.
TV
Quick Number
Manufacturer/Brand
STB
0
SANYO
1
SONY
2
SAMSUNG
3
LG
4
TOSHIBA
ASPECT/ENTER
5
PANASONIC
IPTV
6
PHILIPS
7
HITACHI
8
SHARP
IPTV
IPTV
9
VIZIO
IPTV
AUDIO
Quick Number
Manufacturer/Brand
IPTV
0
ROTEL
1
DENON
2
YAMAHA
3
MARANTZ
4
SONY
5
INTEGRA
6
HARMAN KARDON
7
PIONEER
8
ONKYO
* The Pre-Programmed 3-Digit Code Method
9
LEXICON
* The Learning Method
DVD
Quick Number
Manufacturer/Brand
0
HITACHI
1
SONY
2
PHILIPS
3
SAMSUNG
4
PHILIPS MAGNAVOX
5
PANASONIC
6
LG
7
JVC
8
DENON
9
PIONEER
AUX
for 30 seconds. The next step must be
simultaneously for 3 seconds until the
entered while the LED is on.
Device LED light turns on.
Quick Number
Manufacturer/Brand
STEP3 Press the [CH5] or [CH6] button one at
STEP2 Press and hold both the [DEVICE] button
0
BOSE
a time or keep it pressed. The remote
you want to erase and the [PAUSE] button
1
HP
will emit a series of Power ON/OFF
for 5 seconds. The Device LED will blink
2
APPLE / iPod
code signals. Release the [CH5] or [CH6]
twice to confirm the erasure.
3
APPLE / iPod
button as soon as the equipment turns off.
STEP3 To exit, press and hold both the [DEVICE]
4
MICROSOFT / XBOX
*Note : You can verify that you have selected the
and [ASPECT] buttons simultaneously
5
SONY / PS2
correct code by pressing the [POWER]
6
LUTRON
H.To Identify the 3-Digit Code
button. The equipment should turn back
7
X-10
on. Then try all of the functions on the
Programmed for a Device
8
X-10
remote control (i.e. volume, mute, etc.) to
9
MICROSOFT / XBOX
ensure you have the correct code. If any of
STEP1 Press the appropriate [DEVICE] button
and the [OK/SEL] button simultaneously
the functions do not operate as they should,
repeat the instructions from STEP 3 above
for three seconds. The device LED will
C. Pre-Programmed 3-Dight Code Method
to continue the Auto Search Method.
turn on for 30 seconds. The next step
STEP1 Turn on the equipment that you want
must be performed while the LED is on.
STEP4 Press the same [DEVICE] button to store
the remote control to operate (Set top
the code. The Device LED will blink twice
STEP2 Press the [INFO] button. The device LED
Box, TV, DVD, etc.).
to confirm that the code has been stored.
will blink a number of times indicating
STEP2 Press the [DEVICE] button and the
the number of each digit for the code.
E. The Learning Method
[OK/SEL] button simultaneously for three
Each digit is separated by a one second
seconds. The corresponding device LED
STEP1 Press the [DEVICE] button (TV,AUD, DVD,
interval of the LED being off.
will turn on indicating that it is ready to
or AUX) to be programmed and the
Example :One blink, (pause) three blinks,
be programmed. The LED will remain on
[ASPECT] buttons simultaneously for 3
for 30 seconds. The next step must be
(pause) eight blinks indicates the
seconds until the Device LED light turns on.
code number 138.
entered while the LED is on.
STEP2 Point the PHAZR-5 at the other remote,
STEP3 Point the remote control toward the
*Note : Ten blinks indicates the number 0.
head-to-head, 1 or 2 inches apart.
equipment and enter the three-digit
STEP3 Press the button on the PHAZR-5 that
I. Programming the AUX Device
code number assigned to your brand
you want to teach a command to. For
from the code tables. If there are more
You can take advantage of the AUX function to
example, press the [MUTE] button to
than one three-digit number listed for
program a devices such as a media PC, gaming
learn a command to the [MUTE] button.
your brand, try one code number at a
console or satellite radio receiver. Follow the
time until your equipment turns off.
STEP4 Press and hold the button on the other
instruction in section C to program an AUX
remote that corresponds to the command
*Note : You can verify that you have selected the
device. You can also program the AUX button for
you want to teach until the PHAZR-5
correct code by pressing the [POWER]
a second TV, DVD or Audio Device. To do this
Device LED light blinks twice.
follow the instructions below.
button. The equipment should turn back
*Note : The LED will blink 5 times if there
on. Then try all of the functions on the
STEP1 Turn on the 5th device you want to
was an error in the learning process.
remote control (i.e. volume, mute, etc.) to
program (TV, AUD, DVD, etc.).
Repeat STEPS 3 and 4 if this occurs.
ensure you have the correct code. If any
Continue learning other buttons by
STEP2 Press the [AUX] button and the
of the functions do not operate as they
repeating STEPS 3 and 4.
[OK/SEL] button simultaneously for 3
should, repeat the instructions from
seconds. The [AUX] device LED will
STEP5 Once you have completed teaching the
STEP 3 above using the next three digit
turn on for 30 seconds.
PHAZR-5 all desired commands for the
code number from the brand list.
component, save the learned commands
STEP3 Press the [Device] button For the type of
STEP4 Store the three-digit code by pressing the
by pressing the [DEVICE] and [ASPECT]
device you want to setup. Point the remote
same [DEVICE] button once again. The
buttons simultaneously until the Device
control toward the device and enter the
device LED will blink twice to confirm that
LED blinks 3 times. Now test all of the
3-digit code number assigned to your brand.
the code has been stored.
buttons to make sure they operate correctly.
*Note : To program a second TV press TV, etc.
D. Auto-Search Method
F. Erasing a Single Learned Command
STEP4 When the equipment turns off verify
If none of the three digit code numbers assigned to
STEP1 Press the [DEVICE] and [ASPECT] buttons
that you have selected the correct
your brand of equipment works, or the code table
simultaneously for 3 seconds until the
code by pressing the [POWER] button.
does not list your brand, you can use the Auto
Device LED light turns on.
The equipment should turn back on.
Search Method to find the correct three-digit code
STEP2 Press and hold the button you want to
Then try all of the functions on the
number for your equipment by following steps:
erase for 3 seconds. The Device LED
remote control (i.e. volume, mute, etc.)
STEP1 Turn on the equipment that you want
will blink twice to confirm the erasure.
to ensure you have the correct code.
the remote control to operate (Set top
STEP3 To exit, press and hold both the [DEVICE]
If any of the functions do not operate as
Box, TV, DVD, etc.).
and [ASPECT] buttons simultaneously
they should, enter the next 3-digit code
STEP2 Press the [DEVICE] button and the
until the Device LED blinks 3 times.
number from the brand list.
[OK/SEL] button simultaneously for
STEP5 Once you have found the correct 3-digit
three seconds. The device LED will turn
G. Erasing All Learned Commands
code, save it by pressing the [AUX] button
on indicating that it is ready to be
from One Device
one more time. The [AUX] LED light will
programmed. The LED will remain on
blink twice to confirm the code was stored.
STEP1 Press the [DEVICE] and [ASPECT] buttons
J. Programming the System On/Off Button
*Note : To return TV device to STB channel
6
Set-up Code Tables
repeat steps above replacing [TV] with
This allows you to program the System On/Off
[STB] in Step 3.
button so it can send up to five power On/Off
STB-IPTV
commands with one button press.
M. Programming a 'Macro' button.
Manufacturer/Brand
STEP1 Press the [STB] button.
If your remote model has custom-programmable
ADB
STEP2 Press the [SYSTEM ON/OFF] button
AMINO
Macro buttons available(See Section 4), they can
and the [OK/SEL] button simultaneously
AT&T
be programmed to act as a 'Macro' or Favorite
for 3 seconds. The [STB] button will
CISCO
Channel button in STB mode. This allows you to
turn on for 30 seconds.
COMCAST
program up to five 2-digit channels, four 3-digit
STEP3 Press the first [DEVICE] button you want to
DREAM
channels or three 4-digit channels that can be
ENTONE
store in the [SYSTEM ON/OFF] button and
accessed with one button press.
then the [POWER] button. Repeat this for
MINERVA
STEP1 Press the [STB] button to select the STB
MYRIO
other Components until you have stored
MOTOROLA
mode.
all the desired power commands into the
NOW TV
[SYSTEM ON/OFF] button.
STEP2 Press the [MACRO] button and
PACE
STEP4 Press the [CH5] button to save the
[OK/SEL] button simultaneously for
SCIENTIFIC ATLANTA 251
3 seconds. The [STB] button will turn
power commands you stored. The
WEGENER
[STB] button will blink twice to confirm
on for 30 seconds.
the commands have been saved.
STEP3 Enter the the 2, 3 or 4-digit code for the
STB-CABLE Converters
channel you want programmed first
Manufacturer/Brand
K. Programming Volume Control
(for example, 007) using the Number
MOTOROLA
Volume and Mute control are factory programmed
Pad, then press the [STOP] button.
PACE
to automatically transfer to the respective
Then enter the code for the next chan-
PIONEER
Device mode You select, as follows:
nel (for example, 050), then press the
SAMSUNG
STB : STB
T V : TV
AUD : AUD
[STOP] button. Repeat this process for
SCIENTIFIC ATLANTA/CISCO 001 003 041 042 045 046
DVD : TV
AUX : AUX
the third channel. The [STB] button will
TV
blink once for each channel entered.
If you wish to store the TV volume control in STB
mode, use the following steps.
STEP4 Press the [CH5] button to store the
Manufacturer/Brand
STEP1 Press the [OK/SEL] button and [STB]
channels that were selected. The
A MARK
[STB] button will blink twice to confirm
button simultaneously for three
ABEX
seconds. The device LED will turn on
the storage of commands.
ACCURIAN
for 30 seconds. The next step must
To access the programmed channels, press the
ADMIRAL
be performed while the LED is on.
[MACRO] button once. This will bring up the
ADVENT
STEP2 Press the [VOL5] button. The device
first channel. Press once again and it will bring
ADVENTURA
LED will blink.
AIKO
up the second channel. Press again and it will
AKAI
bring up the third channel.
STEP3 Press [TV] button. The device LED will
blink twice to confirm the programming.
ALBATRON
N. Low Battery Warning
*Note : To return STB device to STB volume
ALERON
repeat steps above replacing [TV] with
When the batteries are low and need to be
AMERICA ACTION 043
[STB] in Step 3.
replaced with fresh batteries, the Device LED
AMPRO
lights will blink 2 times in sequence whenever a
AMSTRAD
L. Programming Channel Control
[POWER] button is pressed to turn on equip-
ANAM
ment.
AOC
You can program the channel controls (Channel
APEX
Up, Channel Down, Last and Numbers) from
APEX DIGITAL
O. Memory Lock System
one Device to operate in another Device mode.
AQUAVISION
Default channel control settings on the remote
This remote control is designed to retain
ASTAR
control are as follows:
programmed memory for 10 years even after
AUDIOVOX
batteries are removed from the remote con-
STB : STB
T V : STB
AUD : AUD
AVENTURA
trol.
AVIELO
DVD : DVD
AUX : AUX
AVION
If you wish to store the TV channel controls in TV
P. Record Your Component Set-up
AXION
mode, use the following steps.
Codes
BELCOR
STEP1 Press the [OK/SEL] button and [TV] button
BELL&HOWELL 333 072
TV
Set-up Code Number:
simultaneously for three seconds. The
BENQ
device LED will turn on for 30 seconds.
AUD Set-up Code Number:
BOXLIGHT
The next step must be performed while
BRADFORD
DVD
Set-up Code Number:
the LED is on.
BROCKWOOD
AUX
Set-up Code Number:
BROKSONIC
STEP2 Press the [VOL6] button. The device
BYDESIGN
For additional information about your remote
LED will blink.
CANDLE
control, go to www.universalremote.com
STEP3 Press [TV] button. The device LED will
CAPEHART
blink twice to confirm the programming.
CARY AUDIO DESIGN 266
TV
Manufacturer/Brand
Set-Up Code Number
CELEBRITY
001
CENTURION
116
Set-Up Code Number
CETRONIC
043
254 255 315 259
CHANGHONG
247
249 256 257 260 261
CITIZEN
116 002 003 363 043 258 103 143
251
CLARION
043
313 251 316
CLASSIC
043
313
CLP CLASSIC
333
159
COBY
640 641
155 258
COLORTYME
116
178
CONCERTO
363
254 255
CONCIERGE
073
253
CONTEC
043 050 051
314
CORNEA
116
313
CORONADO
143
CRAIG
043 054
250
CROSLEY
164
CROWN
043 143
CURTIS MATHES 116 258 363 143
CXC
043
Set-Up Code Number
CYBERHOME
015
002 111 148
DAEWOO
363 016 043 044 076 103 114 125 127
001 005 002
143
001 103 034 051 063 076 105
DAYTRON
363 143
001 030
DELL
320 164 363 618
DIGITAL PROJECTION 570
DIMENSIA
333
DREAMVISION
235
Set-Up Code Number
DUKANE
011 025
DUMONT
116 073
112 143
DURABRAND
096 052
025
DWIN
257
036
DYNASTY
043
072 251 333
DYNEX
400
247 388
EIKI
187
002
ELECTROBAND 001
103
ELECTROGRAPH 466
116 146 248 404 405 473 475 323 387
ELECTROHOME 143 024 076 196
391 615
ELEKTRA
072
017
ELEMENT
363 494 526 622
028
EMERSON
028 048 043 155 005 116 363 047 050
051 076 096 143 153 154 052 514
073
ENVISION
116
052
EPSON
324 590
043 054 056 080 112
ESA
323
116 363 112 058 616
FISHER
007 057
572
FUJITSU
246 198 410
006
FUNAI
028 043 052
573 574
FUSION
642
477
FUTURETECH
043
076 454 388
GATEWAY
242 268
052
GE
073 116 008 009 034 056 074 155 333
627 628
363
441
GEM
391
039
GIBRALTER
116 073
116
GO VIDEO
026
GOLDSTAR
113 116 102 363 106 112 127 143
423 600
GRUNPY
028 043
266
HAIER
363 501 623
043
HALL MARK
363
116
HANNSPREE
349 381
238
HARLEY DAVIDSON 028
031 032
HARVARD
043
116 002 003 363
HAVERMY
081
058
HELLO KITTY
076
HIMITSU
043
Related Manuals for Universal Remote Control PHAZR-5 UR5L-9000L-IP
Summary of Contents for Universal Remote Control PHAZR-5 UR5L-9000L-IP
- Page 1 The Learning Method allows you to transfer functions from other remotes to the PHAZR-5one button at a time. [OK/SEL] button simultaneously for AUX:AUX. You have the option of controlling STEP2 Press the [VOL6] button. The device Universal Remote Control, Inc. STEP5 Once you have found the correct 3-digit BYDESIGN 031 032 HARVARD three seconds.
- Page 2 TV-LCD & Plasma TVs TV-LCD & Plasma TVs TV-Projectors AUDIO DVD-Blu-ray & HD DVD DVD-DVD/VCR Combos AUX-iPod Controls Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number Manufacturer/Brand...