Table of Contents
About this Guide
Rack stability
Rack stability protects personnel and equipment.
Getting help
If you still have a question after reading this guide, contact an HP Authorized Service Provider
or access our web site: http://www.hp.com.
Note:
products can provide product number, serial number and firmware revision electronically through
the use of supplied management or diagnostic utilities, eliminating the need to physically inspect or
remove products from installed enclosures. You may be directed by HP to run these utilities to
gather required entitlement information.
HP installation and configuration assistance
A moderate level of SAN-related knowledge is required to successfully install this product. If
you are not familiar with installing and configuring storage array systems in a SAN, HP can
install it for you.
For more information, access our web site at
http://www.hp.com/hps/storage/ns_implementation.html.
Depending on your needs, different levels of assistance are available.
For example, the HP Installation and Startup for HP StorageWorks Disk Arrays Service
Package includes:
10
WARNING:
To reduce the risk of personal injury or damage to the equipment, be sure
that:
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
In single rack installations, the stabilizing feet are attached to the rack.
In multiple rack installations, the racks are coupled.
Only one rack component is extended at any time. A rack may become unstable if
more than one rack component is extended for any reason.
HP call centers use product and serial numbers to validate warranty entitlement. Most HP
Physical installation of the MSA
Virtual disk design and configuration of the MSA
Service planning
Service deployment
Installation Verification Testing (IVT)
Customer orientation
HP StorageWorks 2/8q Fibre Channel Switch Installation Guide
Table of Contents
