Table of Contents
Related Manuals for Miele EGW 5050-14
Summary of Contents for Miele EGW 5050-14
- Page 1 Operating and installation instructions Plate warming drawer EGW 5050-14 EGW 5060-14 en - GB, ZA To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.
-
Page 2: Table Of Contents
Contents Guide to the appliance ..........3 Warning and Safety instructions . -
Page 3: Guide To The Appliance
Guide to the appliance On/Off switch (lights up) Temperature control Warming drawer Anti-slip mat In-operation indicator... -
Page 4: Warning And Safety Instructions
They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions. Keep these instructions in a safe place and ensure that new users... - Page 5 Warning and Safety instructions Correct application The appliance is not designed for commercial use. It is intended for use in domestic households and similar working and residential environments. The appliance is not intended for outdoor use. It is intended for domestic use only as described in these operating and installation instructions.
- Page 6 Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the appliance unless they are constantly supervised. Children 8 years and older may only use the appliance if they have been shown how to use it in a safe way and understand the hazards involved.
- Page 7 Installation, maintenance and repairs by unqualified persons could be dangerous. Miele cannot be held liable for unauthorised work. A damaged appliance can be dangerous. Before installation, check the appliance for visible signs of damage.
- Page 8 While the appliance is under guarantee, repairs should only be undertaken by a service technician authorised by Miele. Otherwise the guarantee is invalidated. The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used.
- Page 9 Warning and Safety instructions Correct use You could burn yourself on the hot drawer or crockery. Protect your hands with heat-resistant pot holders or gloves when handling hot dishes. Do not let them get wet or damp, as this causes heat to transfer through the material more quickly with the risk of scalding or burning yourself.
- Page 10 Warning and Safety instructions Cleaning and care Danger of injury. Do not use a steam cleaning appliance to clean this appliance. The steam could reach electrical components and cause a short circuit.
-
Page 11: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain materials which, if The transport and protective packing handled or disposed of incorrectly, has been selected from materials which could be potentially hazardous to are environmentally friendly for human health and to the environment. -
Page 12: Before Using For The First Time
Before using for the first time Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service, data plate" section of this booklet. Cleaning and heating up for the first time ^ Remove any protective foil and sticky labels. -
Page 13: Operation
Operation This appliance uses a hot air warming system. Heat given off by a heating element is distributed evenly throughout the drawer by a fan. The circulating air ensures that crockery is heated evenly and quickly. A protective grille protects you from touching either the fan or the heating element. -
Page 14: Brief Operating Instructions
Operation Brief operating instructions ^ Place the crockery inside the drawer. ^ Select the temperature required. ^ Switch on the appliance (j). The switch lights up. ^ Close the drawer. If you use too much force, it can spring open again. ^ Switch the appliance off (k) before removing the heated crockery. -
Page 15: Heating Up Times
Operation Heating up times Various factors will affect the heating up times: – The material and thickness of the crockery – The amount of crockery – How the crockery is arranged – The temperature setting. It is therefore not possible to state precise times. However, the following information can be used as a guide: Temperature setting r is approx. -
Page 16: Capacity
Operation Capacity The capacity of the drawer depends on the size and weight of your crockery. Do not overload the drawer. The maximum load bearing capacity of the drawer is 25 kg. The loading examples shown here are suggestions only. –... -
Page 17: Cleaning And Care
If not, it might become impossible to remove and could cause the outer surfaces to alter or discolour. Clean the front using a Miele microfibre E-cloth or with a clean sponge and a solution of hot water and washing-up liquid. Then dry with a soft cloth. -
Page 18: Anti-Slip Mat
Cleaning and care To avoid damaging the surface of your appliance, do not use: – cleaning agents containing soda, ammonia, acids or chlorides, – cleaning agents containing descaling agents, – abrasive cleaning agents, e.g. powder cleaners and cream cleaners, – solvent-based cleaning agents, –... -
Page 19: Problem Solving Guide
Problem solving guide Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). Repairs and other work by unqualified persons could be dangerous. - Page 20 Problem solving guide If any of the following problems occur, please contact the Miele Service Department..the crockery does not heat up. Check whether – you can hear the fan. If you can hear the fan: There is a problem with the heater element.
-
Page 21: Optional Accessories
Optional accessories These can be ordered via the internet at www.miele-shop.com, or from Miele (see back cover for contact details). Anti-slip mat Anti-slip mat to keep crockery secure E-Cloth (microfibre cloth) Removes finger marks and light soiling. -
Page 22: Safety Instructions For Installation
Safety instructions for installation Before connecting the appliance to the mains electricity supply make sure that the connection data on the data plate (voltage and frequency) correspond with the mains electricity supply, otherwise the appliance could be damaged. Consult a qualified electrician if in any doubt. The socket and on-off switch should be easily accessible after the appliance has been built in. -
Page 23: Building-In Dimensions
Building-in dimensions Possible combinations Ovens Microwave combi ovens Ventilation cut-out required when installed with a pyrolytic oven Building-in dimension including space for mains connection cable Connection cable L = 2200 mm * Appliances with glass front ** Appliances with metal front... - Page 24 Building-in dimensions Steam ovens Steam combi ovens Ventilation cut-out required when installed with a steam combi oven * Appliances with glass front Building-in dimension including ** Appliances with metal front space for mains connection cable Connection cable L = 2200 mm...
- Page 25 Building-in dimensions XL steam combi ovens Steam pressure oven Cut-out in the housing unit for * Appliances with glass front feeding the water inlet and drain hoses through ** Appliances with metal front Building-in dimension including Ventilation cut-out required when space for mains connection cable installed with an XL steam combi Connection cable L = 2200 mm...
- Page 26 Building-in dimensions Coffee machines Building-in dimension including space for mains connection cable Connection cable L = 2200 mm * Appliances with glass front ** Appliances with metal front...
-
Page 27: Installing The Appliance
Installing the appliance Ensure that the housing unit is aligned at a right angle. ^ Push the appliance into the housing unit as far the vapour strip, and align it. ^ Open the drawer, and use the 2 screws supplied to secure the appliance to the side walls of the housing unit. -
Page 28: Aligning The Front Of The Plate Warming Drawer
Aligning the front of the plate warming drawer After building in the combination appliance, it may be necessary under certain circumstances to – align the front of the plate warming drawer. – align the gap between the plate warming drawer and the combination appliance. -
Page 29: Electrical Connection
Electrical connection All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. - Page 30 Electrical connection Important U.K. This appliance is supplied for connection to a single phase 230-240 V 50 Hz supply with a 3-core cable. The wires in the mains lead are coloured in accordance with the following code: Green/yellow = earth Blue = neutral Brown = live WARNING: THIS APPLIANCE MUST BE...
-
Page 31: After Sales Service, Data Plate
Please note that telephone calls may be monitored and recorded to improve our service. When contacting Miele, please quote the model and serial number of your appliance, which are given on the data plate. N.B. A call-out charge will be applied for service visits where the problem could have been resolved as described in these instructions. - Page 32 Alteration rights reserved/ 3412 M.-Nr. 07 517 010 / 02...